Combine Harvester Parts Guide: Pre-Season Checklist & Replacement Parts
Replacement parts for John Deere, Case IH, New Holland, Massey Ferguson, and Gleaner combines. Headers, sieves, belts, chains, and harvest-season maintenance.
A combine harvester is a significant investment, and ensuring it's in top working order before harvest season is crucial. This guide provides a comprehensive pre-season checklist and highlights essential combine parts replacements to minimize downtime and maximize your yield. At Madison Tractor Company, we understand the importance of reliable equipment, which is why we stock a wide range of combine parts for all major brands, including John Deere, Case IH, New Holland, Gleaner, Massey Ferguson, and more.
Recommended Parts for This Guide
10 parts we recommend — in stock, ships fast, one-click add to cart.
🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.
Pre-Season Combine Inspection Checklist
A thorough inspection is the first step in preparing your combine for harvest. This checklist covers the key areas you need to address. Always consult your operator's manual for specific maintenance recommendations for your model.
1. Engine System
The engine is the heart of your combine. A well-maintained engine ensures consistent power and efficiency.
- Visual Inspection: Search available parts
- Fluid Levels: Check and top off engine oil, coolant, transmission fluid, and hydraulic fluid. Use the correct fluids as specified in your operator's manual. Note the hours since the last service, and change the oil if required.
- Filters: Replace all filters, including oil filter and cartridge oil filter. Clean air filters can drastically improve fuel economy. Madison Tractor stocks a wide variety of filters for all combine makes and models, including those from Donaldson and Fleetguard.
- Cooling System: Inspect the radiator for blockages. Clean out any debris, such as chaff or insects, from the radiator fins. Check the condition of the radiator cap and pressure test the cooling system. Faulty radiators can lead to overheating and major engine damage. We carry radiators for many brands, including Ford/New Holland combines.
- Starting System: Check the battery terminals for corrosion and clean them. Test the battery's charge and replace it if necessary. Inspect the starter and alternator for proper operation. Ensure good connections to all components.
Safety Warning: Always disconnect the battery before working on the electrical system.
2. Threshing and Separating System
This system is responsible for separating the grain from the crop material. Proper adjustment and maintenance are critical for minimizing grain loss.
- Concaves: Inspect the concaves for wear, damage, or broken wires. Worn or damaged concaves can significantly increase grain loss. Depending on your crop type, consider replacing your concaves with a different style (wire, round bar, or slotted) for optimal performance. See our article Combine Concave Replacement: Wire, Round Bar & Slotted for more information. john deere combine concave options can be found at John Deere Combine Concave: STS & S-Series Parts.
- Rotor/Cylinder: Inspect the rotor or cylinder bars for wear or damage. Replace any worn or damaged bars. Check the rotor or cylinder speed settings and adjust them according to the crop being harvested.
- Separating Grates: Inspect the separating grates for blockages or damage. Clean or replace as needed.
- Chaffer and Sieve: Inspect the chaffer and sieve for damage, wear, or blockages. Clean or replace as needed. Adjust the chaffer and sieve settings according to the crop being harvested. Incorrect settings can lead to excessive grain loss over the back.
3. Header and Feederhouse
The header cuts and gathers the crop, feeding it into the combine. A properly maintained header ensures efficient crop flow.
- Sickle Sections: Inspect the sickle sections for sharpness and damage. Dull or damaged sickle sections can lead to crop shattering and increased header loss. Replace worn sickle sections as needed.
- Guards: Inspect the guards for damage or misalignment. Damaged or misaligned guards can cause crop to be missed by the sickle.
- Reel: Inspect the reel bats and tines for damage. Adjust the reel speed and position according to the crop being harvested.
- Feederhouse Chain: Inspect the feederhouse chain for wear and proper tension. A loose or worn feederhouse chain can cause feeding problems.
- Feederhouse Sprockets: Inspect the feederhouse sprockets for wear and replace if necessary.
- Hydraulic Cylinders: Inspect header lift cylinders for leaks or damage.
4. Cleaning System
This system removes chaff and other debris from the grain.
- Chaffer and Sieve: As mentioned previously, inspect these components for damage, wear, or blockages.
- Fan: Inspect the cleaning fan for damage and proper operation. Adjust the fan speed according to the crop being harvested.
5. Driveline and Transmission
These components transmit power from the engine to the wheels and other components.
- Belts: Inspect all combine belts for wear, cracks, or fraying. Replace as needed. Proper belt tension is critical. Common belt failures include the main drive belt (often a B section or C section belt), feeder house belt, and separator belt. Refer to your manual for specific belt sizes and tension specifications.
- Chains: Inspect all chains for wear and proper lubrication. Adjust chain tension as needed.
- bearings: Inspect all bearings for excessive wear or play. Replace worn bearings.
- Gearboxes: Check the oil level in all gearboxes and add oil as needed. Inspect for leaks.
- Hydraulic System: Inspect hydraulic hoses, fittings, and cylinders for leaks. Check the hydraulic fluid level and add fluid as needed. We carry hydraulic pumps for many models including Allis Chalmers combines.
6. Tires and Wheels
Proper tire inflation and wheel alignment are essential for safe and efficient operation.
- Tire Pressure: Check tire pressure and inflate to the recommended pressure.
- Tire Condition: Inspect tires for wear, cuts, or bulges.
- Wheel Bearings: Check wheel bearings for play.
- Wheel Alignment: Ensure proper wheel alignment.
7. Safety Equipment
Ensure all safety equipment is in good working order.
- Lights: Check all lights and replace any burned-out bulbs.
- Reflectors: Ensure all reflectors are clean and visible.
- Warning Devices: Check the horn and other warning devices.
- Fire Extinguisher: Ensure the fire extinguisher is fully charged and readily accessible.
Essential Combine Parts Replacements
Based on your inspection, you'll likely need to replace some combine parts. Here's a list of common replacement parts:
- Engine Parts: This includes parts like radiators, water pumps, starters, alternators, fuel pumps, injectors, pistons, rings, and gaskets such as oil filter seals, oil filter housing gaskets, and pan gaskets. For example, a Massey Ferguson 8570 combine might need a new water pump (cross-reference number 3637256M91) if the original is leaking.
- Filters: As mentioned above, replacing all filters, including oil filters and cartridge oil filters, is crucial for optimal performance.
- Belts and Chains: These are wear items and should be replaced regularly.
- Concaves: John Deere combine concave and other brands' concaves are wear items that affect grain loss.
- Sickle Sections and Guards: These are critical for efficient cutting.
- Bearings and Seals: Replacing worn bearings and seals can prevent more serious damage.
- Hydraulic Components: Hydraulic pumps, cylinders, and hoses can leak or fail over time.
- Electrical Components: Starters, alternators, and wiring harnesses can fail due to age and wear.
Specific Combine Brands and Models
Madison Tractor Company stocks combine parts for a wide range of brands and models. Here are some examples:
- John Deere: We carry John Deere combine parts for models like the 9000 series, S-Series, and X-Series. Common parts include concaves, sieves, belts, and engine components.
- Case IH: We stock Case IH combine parts for the Axial-Flow 1400-9200 series. Common parts include rotor bars, concaves, and feederhouse chains.
- New Holland: We carry New Holland combine parts for the CR, CX, and TR series. Common parts include belts, concaves, and cleaning system components.
- Gleaner: We stock Gleaner combine parts for the R, N, and S series. Common parts include accelerator rolls, feeder chains, and cleaning fan components.
- Massey Ferguson: We carry Massey Ferguson combine parts for the 700 and 8500 series. Common parts include sickle sections, belts, and hydraulic components.
Maintenance Tips for Longevity
Regular maintenance can significantly extend the life of your combine.
- Daily Maintenance: Check fluid levels, lubricate grease fittings, and clean chaff from the engine compartment and radiator.
- Weekly Maintenance: Inspect belts, chains, and bearings for wear. Adjust belt and chain tension as needed.
- Seasonal Maintenance: Perform a thorough inspection before each harvest season, as outlined in this guide. Replace any worn or damaged parts.
- Off-Season Storage: Properly prepare your combine for storage at the end of the harvest season. This includes cleaning the combine, lubricating all moving parts, and protecting it from the elements.
Safety First
Working on agricultural equipment can be dangerous. Always follow these safety precautions:
- Read the Operator's Manual: Understand the operation and maintenance procedures for your specific combine model.
- Disconnect the Battery: Before working on the electrical system, disconnect the battery to prevent electrical shock.
- Use Proper Tools: Use the correct tools for the job and ensure they are in good working order.
- Wear Safety Gear: Wear safety glasses, gloves, and hearing protection when working on the combine.
- Work in a Safe Environment: Work in a well-lit and ventilated area.
- Never Work Under Unsupported Equipment: Always use jack stands or other supports when working under the combine.
By following this comprehensive guide, you can ensure that your combine is ready for harvest season. Remember to inspect your combine thoroughly, replace worn or damaged parts, and follow all safety precautions.
Madison Tractor Company is your trusted partner for all your combine parts needs. We offer a wide selection of high-quality parts at competitive prices. Shop online today or contact our knowledgeable staff for assistance in finding the right parts for your combine. We proudly serve farmers and ranchers with parts for John Deere, Case IH, Ford, New Holland, Massey Ferguson, Kubota, Allis Chalmers, Deutz, International Harvester, Oliver, White, Gleaner, Vermeer, Hesston, Mahindra, and Zetor equipment.
🔍 Can't Find Your Part?
Use our AI-Powered Part Finder to search by your equipment's make, model, and what you need. It's the fastest way to find the exact part for your machine.
Try the Part Finder →In This Guide
Shop Related Parts
Browse All PartsRelated Articles
John Deere Combine Parts: 9000, S-Series & X-Series
Keep your John Deere combine running strong with the right parts. We cover common issues and essential maintenance tips for the 9000, S-Series, and X-Series combines, helping you maximize your harvest.
Read ArticleCase IH Combine Parts: Axial-Flow 1400-9200 Series
Maintaining your Case IH Axial-Flow combine is crucial for a successful harvest. This guide covers essential maintenance, common repairs, and part replacements for 1400-9200 series combines, helping you minimize downtime and maximize efficiency.
Read ArticleNew Holland Combine Parts: CR, CX & TR Series
Maximize your harvesting season with quality New Holland combine parts. This guide covers common issues and maintenance tips for CR, CX, and TR series combines, helping you keep your machine running smoothly.
Read ArticleGleaner Combine Parts: R, N & S Series Replacements
Maintain peak harvesting performance with the right Gleaner combine parts. We cover essential replacements for R, N, and S series combines, helping you avoid downtime and maximize your yield.
Read ArticleMassey Ferguson Combine Parts: 700 & 8500 Series
Keep your Massey Ferguson 700 & 8500 series combine running smoothly with the right parts and maintenance. This guide covers common issues, essential parts, and helpful tips for peak performance.
Read ArticleCombine Belt Replacement: Drive, Feeder & Separator Belts
Combine belts are critical for efficient harvesting. This guide covers inspecting, replacing, and maintaining drive, feeder, and separator belts to keep your combine running smoothly. Find the right combine belts for John Deere, Case IH, and more.
Read ArticleCombine Concave Replacement: Wire, Round Bar & Slotted
Replacing a combine concave can significantly improve harvesting efficiency and grain quality. This guide covers the different concave types—wire, round bar, and slotted—and provides practical advice for replacement and maintenance.
Read ArticleJohn Deere Combine Concave: STS & S-Series Parts
Optimize your John Deere STS or S-Series combine with the right concave. This guide explains different concave types (wire, round bar, slotted) and helps you choose the best option for different crops. Find durable replacement combine parts at Madison Tractor.
Read ArticleCombine Rasp Bar Replacement: Cylinder & Rotor Bars
Worn or damaged rasp bars can significantly reduce your combine's threshing efficiency. This guide provides a comprehensive overview of rasp bar replacement, covering everything from identification and removal to installation and maintenance, ensuring optimal harvesting performance.
Read ArticleCombine Sieve & Chaffer: Adjustment & Replacement
Proper combine sieve and chaffer adjustment are crucial for efficient grain harvesting. This guide covers inspection, adjustment techniques, and replacement procedures to minimize grain loss and maximize yield. Get the most out of your combine this season.
Read ArticleCombine Header Parts: Knife Sections, Guards & Fingers
The combine header is where the harvesting process begins. This guide focuses on the critical components of the header: knife sections, guards, and fingers. Learn how to maintain and replace these parts for optimal combine performance.
Read ArticleCombine Knife Section: Sickle Blade Replacement Guide
Maintaining your combine's knife section is crucial for efficient harvesting. This guide provides a step-by-step process for replacing sickle blades, ensuring a clean cut and minimizing crop loss. Learn about common issues, safety precautions, and where to find the right parts for your machine.
Read ArticleCombine Feeder House Chain: Replacement & Adjustment
The feeder house chain is a critical component of your combine, ensuring efficient crop flow. This guide covers maintenance, replacement procedures, and proper adjustment to keep your combine running smoothly during harvest season.
Read ArticleCombine Straw Chopper Blade: Knives & Counterblade
Maintaining your combine's straw chopper is crucial for efficient residue management. This guide covers everything you need to know about straw chopper blades, counterblades, and their impact on your harvest, plus tips on replacement and maintenance.
Read ArticleJohn Deere Combine Belt Diagram: All Belt Routes
Understanding your John Deere combine belt diagram is crucial for maintaining peak harvesting performance. This guide helps you correctly route belts and troubleshoot issues, ensuring a smooth and efficient harvest.
Read ArticleCombine Auger Finger: Header Auger Retractable Fingers
Combine auger fingers are critical for smooth crop feeding into the header. This guide covers different types, maintenance, and replacement strategies to keep your combine running efficiently. Shop replacement parts at Madison Tractor Company.
Read ArticleCombine Separator Grate: Rotor Cage & Cover Plates
Maximize your combine's efficiency with our comprehensive guide to separator grates, rotor cages, and cover plates. Learn about maintenance, replacement, and optimizing your harvest yield.
Read ArticleCombine Grain Elevator Chain: Paddles & Sprockets
A properly functioning combine elevator chain is crucial for moving grain efficiently during harvest. This guide covers maintenance, troubleshooting, and parts selection to keep your combine running smoothly.
Read ArticleCase IH Combine Belt: Axial-Flow Belt Routing & Sizes
Navigating Case IH combine belt systems can be challenging. This guide provides essential information on Axial-Flow belt routing, correct belt sizes, and practical replacement tips for peak performance during harvest season.
Read ArticleCombine Pre-Season Maintenance Checklist: 25 Must-Do Items
Maximize your harvest efficiency with our comprehensive combine maintenance checklist! This guide covers 25 essential inspection points, from engine checks to header adjustments, helping you prevent costly breakdowns and ensure a smooth, productive season. Get your combine ready for peak performance!
Read ArticleCombine Corn Head Parts: Deck Plates, Chains & Rollers
Optimize your corn harvesting with essential corn head parts. Learn about deck plates, chains, and rollers, and how to maintain them for peak performance. Madison Tractor provides the parts you need to keep your combine running smoothly.
Read ArticleDraper Header Parts: Belts, Rollers & Deck Plates
Draper headers are vital for efficient harvesting. This guide covers the key components like belts, rollers, and deck plates, offering maintenance tips and replacement advice to keep your combine running at its best. Find the parts you need at Madison Tractor Company.
Read ArticleCombine Rotor & Cylinder Bearing: Replacement Guide
Replacing worn combine rotor and cylinder bearings is essential for smooth operation and preventing costly breakdowns during harvest. This guide provides practical advice and step-by-step instructions to help you get the job done right.
Read ArticleCombine Pickup Reel: Tines, Bats & Speed Drive
The combine pickup reel is crucial for efficient crop feeding. This guide covers maintenance, repair, and replacement of tines, bats, and speed drives to keep your combine running smoothly. Improve harvesting efficiency and reduce downtime with these essential tips.
Read ArticleJohn Deere Combine Radiator: Cooling System Parts
A well-maintained cooling system is critical for your John Deere combine's performance. This guide covers common radiator issues, cooling system parts, and essential maintenance tips to ensure a smooth harvest. Learn how to keep your combine running at peak efficiency.
Read ArticleCombine Skid Plate & Wear Strip: Feeder House Protection
Combine feeder houses take a beating. Learn how skid plates and wear strips protect this crucial component, how to spot wear, and how to replace these vital parts. Madison Tractor has the combine wear strip for your machine.
Read ArticleCombine Grain Loss: Causes & How to Reduce Losses
Excessive combine grain loss translates directly into lost profits. This guide covers the common causes of grain loss, from improper settings to worn combine parts, and provides practical solutions to minimize these losses and maximize your yield.
Read ArticleCombine Hydrostatic Drive: Pump & Motor Replacement
Is your combine's hydrostatic drive system giving you trouble? This guide provides expert advice on troubleshooting, pump and motor replacement, and maintenance tips to keep your combine harvesting efficiently. Learn what to look for and how to get the job done right.
Read ArticleNew Holland Combine Belt: TR, CR & CX Belt Sizes
Selecting the right New Holland combine belt is crucial for reliable harvest performance. This guide covers belt types, sizes, and maintenance tips for TR, CR, and CX series combines, ensuring you minimize downtime and maximize efficiency.
Read ArticleCombine Straw Walker: Bearing & Crank Replacement
Straw walkers are a critical part of your combine's separation system. This guide walks you through replacing worn bearings and cranks to keep your combine running smoothly and efficiently. Get back in the field faster with this comprehensive repair guide.
Read ArticleCombine Unloading Auger: Tube, Flighting & Bearing
The combine unloading auger is a critical component for efficient harvesting. Learn about its components – tube, flighting, and bearings – how they work, common problems, maintenance tips, and where to find replacement parts to keep your combine running smoothly.
Read ArticleCombine Yield Monitor Calibration: Step by Step
Accurate yield data is crucial for informed decisions about your farm. This guide provides a step-by-step process for calibrating your combine yield monitor, ensuring you get the most reliable data possible. Learn how to properly calibrate your John Deere, Case IH, or other combine yield monitor for optimal performance.
Read ArticleGleaner Combine Sieve & Chaffer Adjustment
Proper sieve and chaffer adjustment is critical for minimizing grain loss and maximizing efficiency in your Gleaner combine. This guide provides practical steps and tips for achieving optimal separation and a clean grain sample.
Read ArticleCombine Tailboard & Straw Spreader Parts
The combine tailboard and straw spreader are critical for residue management. This guide covers parts, maintenance, and troubleshooting to keep your combine operating efficiently, minimizing downtime during harvest season.
Read ArticleCase IH Combine Concave: Axial-Flow Rotor Parts
Maximize your Case IH Axial-Flow combine's performance with the right concave. This guide covers concave types, replacement, maintenance, and choosing the best option for your harvesting needs. Shop genuine and aftermarket Case IH combine parts at Madison Tractor.
Read ArticleCombine Header Height Sensor: Auto Header Control
Maintaining proper header height is crucial for efficient harvesting. Learn how combine header height sensors work, common problems, and how to keep your machine running smoothly.
Read ArticleCombine Sickle Guard: Standard & Forged Guards
Combine sickle guards are essential for clean, efficient harvesting. This guide explores the differences between standard and forged guards, helping you choose the right one for your combine. Improve your harvest quality and minimize downtime with the right sickle guard.
Read ArticleCombine Return Elevator: Tailings Rethresher Parts
The combine return elevator, or tailings rethresher, is crucial for efficient harvesting. Learn about its function, maintenance, and common problems, plus how to find the right replacement parts.
Read ArticleJohn Deere Combine Header: 600 & 900 Series Platform
Keep your John Deere 600 or 900 series combine header running smoothly with our expert maintenance guide. Learn about common issues, preventative care, and essential replacement parts to maximize harvest efficiency.
Read ArticleCombine Cleaning Fan: Speed Settings & Troubleshooting
Optimize your combine's performance by understanding your cleaning fan. This guide covers speed settings, troubleshooting common issues, and maintenance tips for various combine brands like John Deere and Case IH.
Read ArticleCorn Head Snapping Roll: Rebuild & Replacement
Your corn head snapping rolls are crucial for efficient harvesting. Learn how to inspect, maintain, and replace them to minimize downtime and maximize yield. Madison Tractor is your source for high-quality snapping rolls and combine parts.
Read ArticleCombine Rock Trap: Cleaning & Maintenance
A combine rock trap protects your harvester from damage. Regular cleaning and maintenance are essential for reliable performance. This guide provides practical tips to keep your rock trap in top condition and prevent costly repairs.
Read ArticleCombine Bearing Cross Reference: SKF, Timken & OEM
Replacing combine bearings? This guide provides a combine bearing cross reference for SKF, Timken, and OEM part numbers, helping you find the right replacement for your John Deere, Case IH, or other combine. Learn about bearing types and crucial maintenance tips.
Read ArticleMassey Ferguson Combine Belt: 750-8780 Models
Keep your Massey Ferguson 750-8780 combine running smoothly with the right belts. This guide covers everything from selection and maintenance to troubleshooting and replacement, ensuring peak performance during harvest season.
Read ArticleCombine Threshing Element: Rotor & Cylinder Parts
The combine's threshing element, whether rotor or cylinder, is critical for efficient grain separation. This guide covers maintenance, troubleshooting, and replacement parts to keep your combine running smoothly during harvest.
Read ArticleCombine Chopper Knife Sharpening: When to Replace
Chopper knives are critical for efficient residue management during harvest. Learn how to determine when to sharpen or replace them to maintain optimal performance and minimize downtime. Madison Tractor provides the parts you need to keep your combine running smoothly.
Read ArticleCombine End of Season Storage: Winterization Checklist
Protect your combine from winter's harsh effects with our comprehensive storage checklist. Learn how to properly prepare your machine for off-season storage, preventing costly repairs and ensuring peak performance next harvest.
Read ArticleChallenger Combine Parts: 660 & 670 Series
Keep your Challenger 660 or 670 series combine running smoothly with the right parts. This guide covers common repairs, maintenance tips, and where to find the Challenger combine parts you need to stay productive.
Read ArticleCombine Feeder House Bearing: Front & Rear Replacement
Replacing worn combine feeder house bearings is crucial for smooth harvesting. This guide provides a step-by-step process for replacing front and rear bearings, ensuring optimal performance and preventing costly downtime.
Read Article
















