Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Combine Unloading Auger: Tube, Flighting & Bearing

The combine unloading auger is a critical component for efficient harvesting. Learn about its components – tube, flighting, and bearings – how they work, common problems, maintenance tips, and where to find replacement parts to keep your combine running smoothly.

Introduction to Combine Unloading Augers

The combine unloading auger is a vital component for efficient grain harvesting. It's responsible for quickly and reliably transferring harvested grain from the combine's grain tank to a grain cart or truck. A properly functioning unloading auger minimizes downtime and maximizes your harvesting efficiency. This guide will cover the key components of the auger – the tube, flighting bearings – common issues, maintenance tips how to find the right replacement parts for your combine unloading auger.

Recommended Parts for This Guide

8 parts we recommend — in stock, ships fast, one-click add to cart.

🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.

As you know, keeping your combine in top shape is crucial during harvest. Other vital systems, such as the threshing and separating components, also need consistent attention. Be sure to check out our guides on combine concave replacement and combine belt replacement for more information on maintaining other critical areas of your machine.

The Unloading Auger Tube

The auger tube, also known as the spout, serves as the housing and guide for the rotating flighting. It's typically made of heavy-gauge steel to withstand the abrasion of grain and the stresses of operation. The tube's design often incorporates bends and angles to position the grain discharge point optimally for filling grain carts. Common issues

  • Wear and Abrasion Over time, the constant friction from the grain can wear down the inside of the tube, especially at bends.
  • Dents and Damage Impacts from foreign objects or collisions can dent or damage the tube, affecting the smooth flow of grain.
  • Corrosion Moisture can lead to rust and corrosion, weakening the tube's structure.

Inspection and Maintenance Regularly inspect the tube for signs of wear, damage, or corrosion. Clean the tube periodically to remove any built-up residue. Consider applying a protective coating to the inside of the tube to reduce wear.

If you notice significant wear or damage, replacing the tube is essential to prevent further problems. Madison Tractor Company carries a wide selection of auger tubes for various combine models, including John Deere, Case IH, New HollandGleaner. When ordering a replacement, ensure you have the correct part number for your specific combine model and year. For example, a John Deere S680 may require a different tube than a John Deere 9600.

The Unloading Auger Flighting

The flighting is the spiral-shaped component that rotates inside the auger tube, moving the grain from the grain tank to the discharge point. It's typically constructed from steel and is welded to a central shaft. Key considerations for flighting

  • Pitch The distance between each spiral (pitch) affects the auger's capacity and efficiency.
  • Diameter The diameter of the flighting determines the volume of grain moved per revolution.
  • Material Thickness Thicker flighting is more durable and resistant to wear.

Common problems with flighting

  • Wear and Abrasion The edges of the flighting wear down over time, reducing their ability to effectively move grain.
  • Bending and Distortion Foreign objects or overloading can bend or distort the flighting, causing it to rub against the tube.
  • Breaks and Cracks Stress and fatigue can lead to cracks and breaks in the flighting, especially at the welds.

Inspection and Maintenance Regularly inspect the flighting for wear, damage distortion. Check the welds for cracks. Replace the flighting if you notice significant wear or damage. Some older combines, like certain Allis Chalmers or Massey Ferguson models, may require flighting sections to be welded onto the original auger; this can be a cost-effective solution but requires skilled welding.

Flighting wear is often accelerated when working with abrasive crops like soybeans or rice. Consider the type of crops you harvest when choosing replacement flighting. Madison Tractor Company offers flighting for many models, including Case IH Axial-Flow combines. When replacing flighting, consider replacing the bearings at the same time for a more comprehensive repair.

The Unloading Auger Bearings

Bearings support the auger shaft and allow it to rotate smoothly. They are crucial for reducing friction and preventing excessive wear on the flighting and tube. There are typically bearings at both ends of the auger sometimes intermediate bearings depending on the length of the auger. Common bearing types

  • Ball Bearings Suitable for moderate loads and speeds.
  • Roller Bearings Better suited for heavier loads and higher speeds.
  • Sleeve Bearings Often used in low-speed, low-load applications.

Common bearing issues

  • Wear and Contamination Dirt, debris moisture can contaminate the bearings, leading to wear and premature failure.
  • Lack of Lubrication Insufficient lubrication increases friction and heat, causing bearing damage.
  • Overloading Exceeding the bearing's load capacity can lead to rapid failure.

Inspection and Maintenance Regularly inspect the bearings for play, noise overheating. Grease the bearings according to the manufacturer's recommendations. Replace the bearings if you notice any signs of wear or damage. A tell-tale sign of bearing failure is excessive vibration during operation. Neglecting a failing bearing can lead to damage to the auger tube and flighting, resulting in more costly repairs.

When replacing bearings, use high-quality replacements designed for agricultural applications. Madison Tractor Company stocks bearings for a wide range of combines, including bearings for John Deere combines. Be sure to consult your combine's service manual for the correct bearing type and size. Typical bearing part numbers might look like, 87654123, or similar formats depending on the manufacturer. Torque specifications for bearing mounting bolts are also crucial; consult your service manual for the correct values.

Troubleshooting Common Unloading Auger Problems

Here are some common unloading auger problems and potential solutions

  • Slow Unloading Could be due to worn flighting, a clogged auger tube, or a slipping drive belt. Inspect and replace worn components, clear any blockages adjust or replace the drive belt as needed. Consider the moisture content of the grain; excessively wet grain can also slow unloading.
  • Grain Leakage Could be caused by holes in the auger tube, gaps in the flighting, or worn seals. Repair or replace damaged components and ensure proper sealing.
  • Excessive Noise or Vibration Could indicate worn bearings, a bent auger shaft, or loose mounting hardware. Inspect and replace worn bearings, straighten or replace the auger shaft tighten all mounting hardware.
  • Auger Clogs Often caused by foreign objects or wet grain. Stop the combine, disengage the auger carefully remove the blockage. Always wear gloves and eye protection when clearing clogs.

Safety First!

Warning Always shut down the combine engine and disengage the unloading auger before performing any inspection, maintenance, or repair. Ensure the area around the auger is clear of personnel and obstacles. Never attempt to clear a clogged auger while it is running. Wear appropriate personal protective equipment, including gloves and eye protection.

Selecting the Right Replacement Parts

When replacing parts on your combine unloading auger, always choose high-quality replacements designed for your specific combine model. Madison Tractor Company offers a wide selection of parts for various brands, including John Deere, Case IH, New Holland, Gleaner, Massey Ferguson more. We carry a comprehensive inventory, including radiators, water pumps, starters, alternators, hydraulic pumps, cylinders, clutch kits, PTO parts, fuel pumps, carburetors, injectors, filters, gaskets, pistons, bearings, seals belts. If you're working on an older machine, like a Ford combine or an International Harvester model, finding quality replacement parts is even more crucial.

Remember, proper maintenance of your combine, including components like the John Deere combine concave if you operate a Deere, is essential for a successful harvest season. Don't wait for a breakdown – proactively inspect and maintain your equipment to avoid costly downtime.

Shop combine parts at Madison Tractor Company

Madison Tractor Company is your trusted source for high-quality combine parts and accessories. We offer a wide selection of parts for all major brands, including John Deere, Case IH, New Holland, Gleaner more. Our knowledgeable staff is here to help you find the right parts for your needs. Browse our online catalog or contact us today to learn more. Get the parts you need to keep your combine running smoothly all season long. Browse our unloading auger tubes today! You can also use our AI-Powered Part Finder to search for parts by your specific make and model.