Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Combine Concave Replacement: Wire, Round Bar & Slotted

Replacing a combine concave can significantly improve harvesting efficiency and grain quality. This guide covers the different concave types—wire, round bar, and slotted—and provides practical advice for replacement and maintenance.

the combine concave is a critical component in the threshing process, separating grain from the plant material. Worn or damaged Concaves lead to increased grain loss, reduced harvesting efficiency, and lower grain quality. Understanding the different types of concaves and how to replace them is essential for maximizing your harvest. At Madison Tractor Company, we offer a wide selection of combine concaves for various brands, including John Deere, Case IH, New Holland, and more. This guide provides a comprehensive overview of combine concaves and their replacement.

Recommended Parts for This Guide

6 parts we recommend — in stock, ships fast, one-click add to cart.

🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.

Understanding Combine Concave Types

Combine concaves come in several designs, each suited for different crop conditions and harvesting requirements. The three primary types are:

  • Wire Concaves: These concaves feature a grid of wires and are ideal for dry, brittle crops like wheat and barley. The open design allows for good separation and minimal grain damage.
  • Round Bar Concaves: Round bar concaves use smooth, rounded bars to gently thresh the crop. They're often preferred for fragile grains like soybeans and edible beans, reducing cracking and damage. For enhanced threshing, consider concave insert bars specifically designed for round bar concaves.
  • Slotted Concaves: Slotted concaves have solid bars with slots or perforations. They offer a balance between threshing efficiency and grain quality, working well in a variety of crops. Some slotted concaves also feature a smooth surface for gentle threshing of delicate crops like flax or sunflowers.

Choosing the right concave type depends on the crops you're harvesting and the desired grain quality. Consulting your combine's operator manual will provide specific recommendations.

Knowing When to Replace Your Combine Concave

Several signs indicate that your combine concave needs replacement:

  • Excessive Grain Loss: If you're noticing a significant increase in grain loss out the back of the combine, a worn concave may be the culprit.
  • Cracked or Damaged Grain: Damaged or broken concave elements can lead to increased grain damage.
  • Uneven Threshing: If the grain isn't being threshed evenly, it may indicate a worn or damaged concave.
  • Visible Wear: Inspect the concave for worn wires, bent bars, or broken sections.

Regular inspection of your concave is critical for identifying wear and preventing costly problems during harvest. Check your combine harvester parts & maintenance regularly.

Tools and Materials Needed for Combine Concave Replacement

Before starting the replacement process, gather the necessary tools and materials:

  • new combine concave (check your operator's manual for the correct part number or contact Madison Tractor for assistance. We carry concaves for John Deere combines, including John Deere combine parts for 9000, S-Series & X-Series, as well as Case IH, New Holland, and Gleaner combines).
  • Wrench set (metric and/or SAE, depending on your combine).
  • Socket set (metric and/or SAE).
  • Torque wrench.
  • Pry bar.
  • Hammer.
  • Gloves.
  • Safety glasses.
  • Penetrating oil (e.g., WD-40).
  • Operator's manual.

Safety First: Always wear safety glasses and gloves when working on machinery. Disconnect the battery and ensure the combine is properly supported before starting any repair work.

Removing the Old Combine Concave

The removal process varies depending on the combine model, but the following steps provide a general guideline:

  1. Consult the Operator's Manual: Refer to your combine's operator manual for specific instructions on concave removal.
  2. Access the Concave: Open the access panels or doors that provide access to the concave area. This may involve removing feeder housing components.
  3. Loosen Fasteners: Search available parts
  4. Remove the Concave: Carefully remove the concave from the combine. It may be heavy, so use a pry bar and assistance if needed. Be careful not to damage any surrounding components.
  5. Inspect the Concave Area: Clean the concave area and inspect for any damage or wear. Repair or replace any damaged components before installing the new concave.

Pro Tip: Take photos of the concave and its mounting points before removal. This will help you remember the correct orientation and positioning during installation.

Installing the New Combine Concave

The installation process is essentially the reverse of the removal process. Follow these steps:

  1. Position the New Concave: Carefully position the new concave in the combine. Ensure it's oriented correctly.
  2. Secure the Concave: Align the mounting holes and install the bolts, nuts, or clamps. Tighten the fasteners to the specified torque using a torque wrench. Refer to your operator's manual for the correct torque specifications. For example, some John Deere S-Series combines might require a torque of 55 ft-lbs for the concave mounting bolts.
  3. Double-Check: Double-check that all fasteners are tightened securely and the concave is properly seated.
  4. Reinstall Access Panels: Reinstall any access panels or doors that were removed during the removal process.

Important: Always use new hardware when installing a new concave. Worn or damaged fasteners can compromise the integrity of the installation.

Concave Adjustment and Tuning

Once the new concave is installed, it's essential to adjust it properly for optimal performance. Consult your operator's manual for specific adjustment procedures. Generally, concave clearance (the distance between the concave and the rotor or cylinder) and concave levelness are the key parameters to adjust.

  • Concave Clearance: Adjust the concave clearance according to the crop being harvested. Smaller clearances are generally used for finer grains like wheat and barley, while larger clearances are used for coarser grains like corn and soybeans.
  • Concave Levelness: Ensure the concave is level across its width. Uneven levelness can result in uneven threshing and increased grain loss.

Fine-Tuning: After making adjustments, run the combine and monitor its performance. Check for grain loss, grain damage, and threshing efficiency. Make further adjustments as needed to optimize performance. Keep an eye on other parts, too, like combine rasp bars.

Maintenance Tips for Combine Concaves

Proper maintenance extends the life of your combine concave and ensures optimal performance:

  • Regular Inspection: Inspect the concave regularly for wear, damage, and loose fasteners.
  • Cleaning: Clean the concave periodically to remove accumulated debris and crop residue.
  • Proper Storage: When storing the combine for the off-season, protect the concave from moisture and corrosion.
  • Follow Adjustment Guidelines: Always follow the manufacturer's adjustment guidelines.

By following these maintenance tips, you can maximize the lifespan of your combine concave and ensure peak harvesting performance. We provide quality Case IH combine parts including concaves for Axial-Flow 1400-9200 Series combines, as well as New Holland combine parts for CR, CX & TR Series models.

Madison Tractor Company is your trusted source for high-quality combine parts. We stock a wide selection of concaves for all major brands, including John Deere, Case IH, New Holland, Massey Ferguson, Kubota, Allis Chalmers, Deutz, International Harvester, Oliver, White, Gleaner, Vermeer, Hesston, Mahindra, and Zetor. Whether you need a wire concave, a round bar concave, or a slotted concave, we have the right part for your combine. We also carry a comprehensive inventory of other combine parts, including radiators, water pumps, starters, alternators, hydraulic pumps, cylinders, clutch kits, PTO parts, fuel pumps, carburetors, injectors, filters, gaskets, pistons, bearings, seals, belts, chains, and sickle sections. Be sure to check out our wide selection of combine belts while you're browsing!

Our knowledgeable team is here to help you find the correct parts and provide expert advice. Contact us today to learn more about our combine concave selection and other harvesting solutions.

Shop Madison Tractor for Your Combine Parts Needs

At Madison Tractor Company, we understand the importance of reliable parts for your farm equipment. We're committed to providing high-quality combine concaves and other parts at competitive prices. Browse our extensive online catalog or contact our expert team today. Maximize your harvest with Madison Tractor!

🔍 Can't Find Your Part?

Use our AI-Powered Part Finder to search by your equipment's make, model, and what you need. It's the fastest way to find the exact part for your machine.

Try the Part Finder →