Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Case IH Combine Concave: Axial-Flow Rotor Parts

Maximize your Case IH Axial-Flow combine's performance with the right concave. This guide covers concave types, replacement, maintenance, and choosing the best option for your harvesting needs. Shop genuine and aftermarket Case IH combine parts at Madison Tractor.

Understanding Your Case IH combine concave #

The combine concave plays a critical role in separating grain from the crop material as it flows through the rotor. A worn or incorrect concave can drastically reduce harvesting efficiency, increase grain loss, and even damage the grain itself. For Case IH Axial-Flow combines, selecting and maintaining the right concave is crucial for optimal performance. This guide provides a comprehensive overview of Case IH combine concaves, focusing on Axial-Flow rotor systems.

Recommended Parts for This Guide

5 parts we recommend — in stock, ships fast, one-click add to cart.

🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.

At Madison Tractor Company, we understand the importance of quality parts. We offer a wide selection of combine parts for various makes and models, including John Deere, Case IH, New Holland, Gleaner, and Massey Ferguson combines. We also stock parts for tractors from brands like Ford, Kubota, Allis Chalmers, Deutz, International Harvester, Oliver, White, Vermeer, Hesston, Mahindra, and Zetor.

Types of Case IH Combine Concaves #

Case IH Axial-Flow combines utilize different concave designs based on the crop being harvested. Here's a breakdown of the most common types:

  • Standard Wire Concaves: These are the most versatile and are suitable for a wide range of crops like wheat, barley, and soybeans. They offer a good balance of threshing and separation. A common OEM part number for these would be 87574952 (check your parts manual for your specific application).
  • Small Wire Concaves: Featuring tighter wire spacing, these are best for smaller grains like canola or flax. They minimize grain loss through the concave but can be more prone to plugging in damp conditions.
  • Large Wire Concaves: Designed for high-volume crops like corn, large wire concaves allow for greater material flow.
  • Round Bar Concaves: These concaves utilize rounded bars instead of wires, providing a more aggressive threshing action. They are often used in challenging conditions or for crops with tough pods.
  • Slotted Concaves: Combine concave replacement with slotted options are excellent for corn and soybeans. These offer a good balance between threshing and capacity.

Choosing the Right Concave: Refer to your Case IH operator's manual for specific recommendations based on your crop and harvesting conditions. Consulting with experienced farmers in your area can also provide valuable insights.

Identifying Wear and Damage #

Regularly inspect your concaves for signs of wear and damage. Key indicators include:

  • Worn Wires or Bars: Look for flattened or broken wires/bars, especially in the front section of the concave where the majority of threshing occurs.
  • Bent or Distorted Concaves: Impact from rocks or other debris can bend the concave frame, affecting its performance.
  • Cracks or Breaks: Carefully examine the concave frame and supports for any signs of cracking or breakage.

Worn or damaged concaves reduce threshing efficiency, leading to increased grain loss and potential damage to other combine components. Prompt replacement is crucial to maintain optimal performance. Remember to inspect your combine belts as well, ensuring proper operation and minimizing further wear on other components.

Case IH Combine Concave Replacement: A Step-by-Step Guide #

Replacing a Case IH combine concave is a straightforward process, but it requires attention to detail and proper safety precautions. Always consult your Case IH service manual for specific instructions related to your combine model. Here's a general guide:

  1. Safety First: Disconnect the battery and engage the parking brake. Ensure the combine is on a level surface and properly supported.
  2. Access the Concave: Depending on your model, you may need to remove side panels or other components to access the concave area.
  3. Remove the Old Concave: Loosen and remove the bolts or fasteners securing the concave in place. Support the concave during removal to prevent it from falling.
  4. Inspect the Mounting Area: Clean the mounting area and inspect for any damage or wear. Replace any worn or damaged mounting hardware.
  5. Install the New Concave: Carefully position the new concave in place and secure it with the appropriate bolts or fasteners.
  6. Torque Specifications: Refer to your service manual for the correct torque specifications for the concave mounting bolts. Proper torque is essential to ensure the concave is securely fastened. A common torque spec is 45-55 ft-lbs, but ALWAYS verify this in your manual.
  7. Reassemble: Reinstall any components that were removed to access the concave.
  8. Test Run: Start the combine and run it at idle to check for any unusual noises or vibrations.

Safety Warning: Always wear safety glasses and gloves when working on agricultural equipment. Be aware of pinch points and moving parts. If you are not comfortable performing this task, consult a qualified mechanic.

Maintenance Tips for Longevity #

Proper maintenance can significantly extend the life of your Case IH combine concaves:

  • Regular Inspection: Inspect your concaves regularly for wear and damage. Catching problems early can prevent more serious issues.
  • Proper Cleaning: Remove any accumulated debris from the concaves after each harvest. This will help prevent corrosion and maintain optimal performance.
  • Correct Settings: Ensure your combine settings are properly adjusted for the crop being harvested. Incorrect settings can overload the concaves and accelerate wear.
  • Store Properly: When storing your combine for the off-season, clean the concaves thoroughly and apply a rust preventative coating.

Troubleshooting Common Issues #

Here are some common issues related to Case IH combine concaves and how to troubleshoot them:

  • Excessive Grain Loss: This could be caused by worn concaves, incorrect concave settings, or improper rotor speed.
  • Grain Damage: Over-threshing can damage the grain. Adjust concave clearance and rotor speed to reduce damage.
  • Concave Plugging: Plugging can be caused by excessive moisture or incorrect concave type. Consider using a different concave type or allowing the crop to dry further.

Finding the Right Parts at Madison Tractor Company #

Madison Tractor Company is your trusted source for high-quality case ih combine parts, including a wide selection of concaves for Axial-Flow rotor systems. We offer both genuine Case IH parts and aftermarket options to fit your budget and needs. Our knowledgeable staff can help you find the right concave for your specific combine model and application. In addition to concaves, we stock a comprehensive range of other combine parts, including radiators, water pumps, starters, alternators, hydraulic pumps, cylinders, clutch kits, PTO parts, fuel pumps, carburetors, injectors, filters, gaskets, pistons, bearings, and seals. We have the Case IH combine parts you need to keep your machine running smoothly.

Don't forget to check out our other related articles on combine maintenance, such as Combine Belt Replacement and John Deere Combine Parts.

Ready to find the right Case IH combine concave for your Axial-Flow rotor? Browse our online catalog or contact us today for expert assistance!

🔍 Can't Find Your Part?

Use our AI-Powered Part Finder to search by your equipment's make, model, and what you need. It's the fastest way to find the exact part for your machine.

Try the Part Finder →