Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Ford New Holland TX68 Combine Parts

Browse Ford New Holland TX68 Combine replacement parts. Everything from routine maintenance items to hard-to-find components.

The Ford New Holland TX68 combine, popular throughout the 1990s, delivered reliable performance in various harvesting conditions. This combine features a powerful engine ranging in HP, accommodating header widths up to a certain length. Its conventional separator system made it a favorite among farmers seeking a dependable and efficient harvesting solution for wheat, corn, and soybeans.

About the Tx68

The Ford New Holland TX68, manufactured during the 1990s, was a popular combine known for its robust design and efficient harvesting capabilities. Powering the TX68 was a [Engine Brand] diesel engine, producing approximately [HP] horsepower with a displacement of [Displacement]. This engine provided ample power for tackling demanding harvesting conditions. The TX68 utilizes a conventional threshing and separating system, employing a [Cylinder Width] wide cylinder with rasp bars and a multi-walker straw walker system. The grain tank boasts a capacity of approximately [Bushels] bushels, allowing for extended harvesting intervals. Unloading is swift with an auger capable of unloading at a rate of [Bu/min] bushels per minute. Header widths ranged from [Widths] feet, accommodating various field sizes. Options included a straw chopper or spreader for residue management. The cab provided operators with a comfortable workspace, featuring controls for threshing speed, fan speed, and header height. The TX68 excelled in harvesting a wide range of crops, including wheat, soybeans, corn, and barley.

Tx68 Specifications

Engine[Engine Brand] [HP] HP [Displacement] Diesel
Separator TypeConventional - [Cylinder Width] wide cylinder
Grain Tank[Bushels] bushels
Unloading Rate[Bu/min] bu/min
Header Widths[Widths] ft
Fuel Capacity[Gallons] gallons
Weight[Weight] lbs
Years Produced1990s

Tx68 Maintenance Tips

  • Concave Adjustment: Regularly inspect and adjust the concave clearance to ensure optimal threshing performance and minimize grain damage. Refer to the operator's manual for specific settings for different crops.
  • Belt and Chain Tension: Routinely check and adjust belt and chain tension to prevent slippage and ensure efficient power transmission. Replace worn belts and chains promptly.
  • Sieve and Chaffer Cleaning: Clean sieves and chaffers regularly to prevent buildup of debris and maintain optimal cleaning efficiency. Use compressed air or a brush to remove accumulated material.
  • Bearing Greasing: Grease all bearings according to the manufacturer's recommendations to prevent premature wear and failure. Pay close attention to bearings in high-stress areas like the header and threshing cylinder.

Tx68 History & Background

The Ford New Holland TX68 combine was introduced in the 1990s, solidifying Ford New Holland's presence in the combine harvester market. It was praised for its reliable performance and relatively simple design, making it a popular choice for farmers looking for a dependable and easy-to-maintain combine. While not a revolutionary design, it represents a strong example of conventional combine technology during its era.

Frequently Asked Questions

Which oil filter fits the Ford New Holland TX68?

For the Ford New Holland TX68, the recommended oil filter is 81879134 - Oil Filter.

What replacement flange bearing is suitable for the TX68?

A suitable replacement flange bearing for the TX68 is 86548970 - Bearing, Flange.

What rasp bar set is recommended for the TX68's threshing system?

For the TX68's conventional threshing system, a complete 733639 - Rasp Bar Set, including 4 LH and 4 RH bars with hardware, is recommended.

What are common wear parts needed for the Tx68?

Regular maintenance on the TX68 often requires replacement of components such as the 429215 - Chain, Clean Grain Elevator, 338222 - Bushing, Shaker Shoe, Upper, AF25557 - Filter, Air, Primary Magnum RS, 86013886 - Tensioner, Belt, and 84459072 - Bushing, Rubber; Upper Shoe Drive. Ensuring these parts are in good condition helps maintain optimal combine performance.

Showing 1-24 of 53 products
C5NN13N359E - Warning Lamp / Turn Signal (12 Volt)

C5NN13N359E - Warning Lamp / Turn Signal (12 Volt)

SKU: C5NN13N359E

$32.92

96 in stock

87283179-LED - Replacement For H4 Bulb 600 Lumens Bulb; LED

87283179-LED - Replacement For H4 Bulb 600 Lumens Bulb; LED

SKU: 87283179-LED

$19.90

190 in stock

87283179 - Inner H4-12V Bulb

87283179 - Inner H4-12V Bulb

SKU: 87283179

$8.50

73 in stock

130609 - AMBER FL LIGHT

130609 - AMBER FL LIGHT

SKU: 130609

$33.86

96 in stock

801-432 - Bolt-On Chrome 11ga Top Serrated 10' (RH)
Out of Stock

801-432 - Bolt-On Chrome 11ga Top Serrated 10' (RH)

SKU: 801-432

$495.18

Out of stock

87033212 - Expansion Valve (block type)

87033212 - Expansion Valve (block type)

SKU: 87033212

$35.07

79 in stock

1990756C2 - Expan.Valve

1990756C2 - Expan.Valve

SKU: 1990756C2

$35.07

79 in stock

9831928 - Cleaning Shoe Pivot Frame Shaft

9831928 - Cleaning Shoe Pivot Frame Shaft

SKU: 9831928

$55.78

7 in stock

9811082 - Upper Shoe Arm Bushing

9811082 - Upper Shoe Arm Bushing

SKU: 9811082

$91.72

17 in stock

84459072 - Rubber; Upper Shoe Drive Bushing

84459072 - Rubber; Upper Shoe Drive Bushing

SKU: 84459072

$40.17

354 in stock

84446877 - Upper Bearing; Shoe Drive Housing
Out of Stock

84446877 - Upper Bearing; Shoe Drive Housing

SKU: 84446877

$13.03

Out of stock

84000052 - Rubber; Shaker Shoe Bushing

84000052 - Rubber; Shaker Shoe Bushing

SKU: 84000052

$5.04

84 in stock

434817 - Cleaning Shoe Pivot Frame Roller

434817 - Cleaning Shoe Pivot Frame Roller

SKU: 434817

$24.94

143 in stock

338222 - Upper Shaker Shoe Bushing

338222 - Upper Shaker Shoe Bushing

SKU: 338222

$4.42

104 in stock

320033 - Shaker Shoe Bearing Half Housing

320033 - Shaker Shoe Bearing Half Housing

SKU: 320033

$13.26

700 in stock

733639 - 4 LH / 4 RH Bars (w/ Hardware) Rasp Bar Set
Out of Stock

733639 - 4 LH / 4 RH Bars (w/ Hardware) Rasp Bar Set

SKU: 733639

$898.13

Out of stock

84038625 - Feeder House Chain (Inner) Sprocket
Out of Stock

84038625 - Feeder House Chain (Inner) Sprocket

SKU: 84038625

$70.56

Out of stock

87693856 - Clean Grain Cover

87693856 - Clean Grain Cover

SKU: 87693856

$76.82

6 in stock

87605590 - Elevator Head / Bubble Up Auger Bearing

87605590 - Elevator Head / Bubble Up Auger Bearing

SKU: 87605590

$30.99

205 in stock

86620026 - Triangular Flange
Out of Stock

86620026 - Triangular Flange

SKU: 86620026

$3.57

Out of stock

429215 - Clean Grain Elevator Chain

429215 - Clean Grain Elevator Chain

SKU: 429215

$424.63

3 in stock

429232 - Cleaning Shoe Pivot Frame Bushing

429232 - Cleaning Shoe Pivot Frame Bushing

SKU: 429232

$8.88

154 in stock

86013886 - Belt Tensioner

86013886 - Belt Tensioner

SKU: 86013886

$80.33

77 in stock

WF2051J - Spin-On  (QTY 1) Water Filter
Out of Stock

WF2051J - Spin-On (QTY 1) Water Filter

SKU: WF2051J

$32.18

Out of stock