Ford New Holland 980 Combine Parts

980 parts and accessories

The Ford New Holland 980 combine, manufactured in the early to mid-1980s, was a popular choice for farmers needing a reliable and versatile harvesting solution. Equipped with engines ranging from 175-210 HP and header widths up to 30 feet, it offered a good balance of power and capacity for its time. Known for its robust conventional threshing and separating system, the 980 provided dependable performance in various grain crops.

The Ford New Holland 980 combine harvester was produced from approximately 1980 to 1986. It was designed as an upgrade from earlier New Holland models, offering increased capacity and improved operator comfort. Engine options typically included Ford diesel engines, such as a 401 cubic inch inline six-cylinder engine rated around 175-210 horsepower. This engine provided ample power for threshing even in challenging conditions. The 980 utilizes a conventional threshing system featuring a 52-inch wide cylinder and walkers for grain separation. The grain tank capacity is approximately 175 bushels, and the unloading auger can empty the tank at a rate of approximately 50-60 bushels per minute. Available header widths ranged from 13 feet to 30 feet, allowing farmers to match the machine to their field size and crop type. Chopper and spreader options were available to manage crop residue. The cab featured basic instrumentation and controls, designed for operator comfort and efficiency. The 980 was well-suited for harvesting wheat, soybeans, corn, and other small grains.

Specifications

Engine	Ford 401 Diesel
Separator Type	Conventional - 52-inch wide cylinder
Grain Tank	175 bushels
Unloading Rate	50-60 bu/min
Header Widths	13-30 ft
Fuel Capacity	Unknown gallons
Weight	Unknown lbs
Years Produced	1980-1986 (approximate)

Maintenance Tips

Concave Adjustment: Regularly inspect and adjust the concave clearance to ensure proper threshing and minimize grain damage. Refer to the operator's manual for specific settings for different crops.
Belt and Chain Tension: Check and maintain proper tension on all belts and chains to prevent slippage and premature wear. Replace worn belts and chains promptly.
Sieve and Chaffer Cleaning: Clean the sieves and chaffer screens regularly to prevent clogging and ensure efficient grain separation. Use compressed air or brushes to remove debris.
Bearing Greasing: Grease all bearings according to the manufacturer's recommendations to prevent wear and tear. Pay close attention to bearings in high-wear areas such as the header and threshing unit.

History & Background

The Ford New Holland 980 was introduced in the early 1980s as a mid-sized combine offering a blend of performance and affordability. While not a revolutionary design, it built upon the strengths of previous New Holland combines and provided farmers with a reliable machine for harvesting a variety of crops. It represented a solid upgrade path for farmers using older equipment.

Frequently Asked Questions

What engine is in the Ford New Holland 980?

The Ford New Holland 980 typically used a Ford 401 cubic inch inline six-cylinder diesel engine, producing between 175 and 210 horsepower.

What is the grain tank capacity on a 980?

The grain tank capacity on the Ford New Holland 980 is approximately 175 bushels, with an unloading rate of around 50-60 bushels per minute.

What type of separator does the 980 have?

The Ford New Holland 980 features a conventional threshing system with a 52-inch wide cylinder and walkers for grain separation.

What are common parts needed for the 980?

Common wear parts for the Ford New Holland 980 include concaves, rasp bars, belts, chains, bearings, auger fingers, and sickle sections. Regularly inspecting and replacing these parts will help keep your combine running smoothly.

Showing 1-22 of 22 products

Sort by: