Ford New Holland CR8090 Combine Parts
Ford New Holland CR8090 Combine parts in stock. Quality OEM and aftermarket replacement parts with fast shipping and competitive prices.
The Ford New Holland CR8090, a powerful combine harvester produced from approximately 2007-2012, delivered high-capacity harvesting. Its engines boasted up to 530 HP, depending on the model year. Offering header widths up to 40 feet, the CR8090 utilized a rotary separator system for efficient grain separation, making it a popular choice for farmers seeking high throughput and reduced grain loss in demanding conditions.
About the Cr8090
The Ford New Holland CR8090 was a key player in the high-capacity combine market, manufactured from approximately 2007 to 2012. Powering this beast was an Iveco Cursor 13 engine, typically delivering between 480 and 530 horsepower, depending on the year and specific configuration. This 12.9-liter (787 cu in) diesel engine provided the muscle needed for demanding harvesting conditions. At its core, the CR8090 featured a Twin Rotor threshing and separating system, offering aggressive threshing with gentle grain handling. Grain tank capacity was a substantial 410 bushels, allowing for extended harvesting runs. The high-speed unloading auger boasted a rate of up to 4 bushels per second (240 bu/min), minimizing downtime. Header widths ranged from 30 to 40 feet, providing excellent coverage. Chopper and spreader options efficiently managed crop residue. The cab offered a comfortable and technologically advanced operating environment. The CR8090 excelled in harvesting a wide range of crops, including wheat, corn, soybeans, and other small grains. Its robust design and efficient separation system made it a valuable asset for large-scale farming operations.
Cr8090 Specifications
| Engine | Iveco Cursor 13 480-530 HP 12.9L Diesel |
|---|---|
| Separator Type | Twin Rotor - 2 x 17 in. (432 mm) diameter, 110 in. (2794 mm) long |
| Grain Tank | 410 bushels |
| Unloading Rate | 240 bu/min |
| Header Widths | 30-40 ft |
| Fuel Capacity | 264 gallons |
| Weight | 38,000 lbs (approximate) |
| Years Produced | 2007-2012 (approximate) |
Cr8090 Maintenance Tips
- Concave Adjustment: Regularly check and adjust concave clearance according to the crop being harvested. Incorrect settings can lead to excessive grain damage or incomplete threshing.
- Belt and Chain Tension: Inspect all belts and chains for proper tension and wear. Loose belts can slip, reducing efficiency, while worn chains can break, causing downtime.
- Sieve and Chaffer Cleaning: Clean the sieves and chaffers regularly to prevent plugging and ensure proper grain separation. Use compressed air or a brush to remove debris.
- Bearing Greasing: Grease all bearings according to the manufacturer's recommendations. Proper lubrication is crucial for extending bearing life and preventing premature failure.
Cr8090 History & Background
The Ford New Holland CR8090 was introduced in the mid-2000s as part of the CR series, representing a significant advancement in combine harvester technology. It built upon the success of previous rotary combines, offering increased capacity and efficiency. The CR8090 helped solidify Ford New Holland's position as a leading manufacturer of high-performance harvesting equipment.
Frequently Asked Questions
Which A/C high pressure switch fits the Ford New Holland CR8090?
The recommended A/C high pressure switch for the CR8090 combine is 87000227 - Switch, A/C High Pressure.
What idler sprocket is used in the unloading drive of a CR8090?
For the unloading drive system, the recommended idler sprocket is 86627639 - Sprocket, Idler; Unloading Drive.
Which bottom tailing auger is recommended for the CR8090?
The recommended bottom tailing auger for the CR8090 combine is 84078346 - Auger; Bottom Tailing, Extended Wear.
What are common replacement parts for the Ford New Holland CR8090?
For routine maintenance and optimal performance, commonly replaced parts include: 87658946 - Bearing; Feederhouse Conveyor (Import), the 87011551 - Auger; Bottom Grain Elevator, Extended Wear, the 87665225 - Sprocket, Feeder House Upper Shaft; Outer, 87623214 - Lug, Right Hand (3PK), and the 86977396 - Potentiometer.

84607408 - HID Bulb
SKU: 84607408
198 in stock

87000227 - A/C High Pressure Switch
SKU: 87000227
2 in stock

82023542 - Expansion Valve
SKU: 82023542
26 in stock

87623214 - Right Hand (3PK) Lug
SKU: 87623214
86 in stock

87665225 - Feeder House Upper Shaft; Outer Sprocket
SKU: 87665225
Out of stock

87658946 - Feederhouse Conveyor (Import) Bearing
SKU: 87658946
Out of stock

87011551 - Extended Wear Auger; Bottom Grain Elevator
SKU: 87011551
3 in stock

86627639 - Idler; Unloading Drive Sprocket
SKU: 86627639
8 in stock

84078346 - Extended Wear Auger; Bottom Tailing
SKU: 84078346
5 in stock

86977396 - Potentiometer
SKU: 86977396
84 in stock








