Ford New Holland CR960 Combine Parts
Replacement parts for the Ford New Holland CR960 Combine. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.
The Ford New Holland CR960 combine, manufactured from approximately 2003-2007, offered farmers a blend of power and efficiency. Housing a robust engine around 335 HP and accommodating header widths up to 36 feet, the CR960 was known for its high-capacity rotary separator. This combine quickly became a popular choice for its ability to handle a wide variety of crops and its impressive throughput.
About the Cr960
The Ford New Holland CR960 was introduced in the early 2000s as part of the CR series, representing a significant step forward in rotary combine technology for Ford New Holland (later New Holland). Production years spanned roughly from 2003 to 2007. It was equipped with a Cummins QSC8.3 engine, delivering approximately 335 horsepower with an 8.3-liter displacement, providing ample power for demanding harvesting conditions. The CR960 utilized a Twin Rotor system for threshing and separating grain from the material other than grain (MOG). This rotary system offered improved grain quality and reduced losses compared to conventional cylinder combines. The grain tank held around 300 bushels, and it could unload at a rate of approximately 3.3 bushels per second (200 bu/min). Header widths ranged from 20 to 36 feet, allowing for efficient harvesting across varying field sizes. Chopper and spreader options were available to manage residue effectively. The cab featured improved ergonomics and controls, making long harvesting days more comfortable for the operator. The CR960 excelled at harvesting a variety of crops, including wheat, corn, soybeans, and other small grains.
Cr960 Specifications
| Engine | Cummins QSC8.3 335 HP 8.3L Diesel |
|---|---|
| Separator Type | Twin Rotor - Twin 17-inch Rotors |
| Grain Tank | 300 bushels |
| Unloading Rate | 200 bu/min |
| Header Widths | 20-36 ft |
| Fuel Capacity | 150 gallons |
| Weight | 28,000 lbs |
| Years Produced | 2003-2007 |
Cr960 Maintenance Tips
- Concave Adjustment: Regularly inspect and adjust concave clearances based on the crop being harvested to optimize threshing performance and minimize grain damage.
- Belt and Chain Tension: Check and maintain proper tension on all belts and chains throughout the combine, especially before the start of each harvest season, to prevent slippage and premature wear.
- Sieve and Chaffer Cleaning: Clean the sieves and chaffers frequently to remove debris and ensure proper airflow for efficient grain cleaning.
- Bearing Greasing: Grease all bearings according to the manufacturer's recommendations to prevent overheating and extend bearing life. Pay special attention to bearings on the header, feeder house, and cleaning system.
Cr960 History & Background
The Ford New Holland CR960 was a significant addition to the CR series, solidifying New Holland's position in the rotary combine market. It offered a blend of power, capacity, and technological advancements that appealed to farmers looking for increased efficiency. While not undergoing major redesigns during its production run, it remained a competitive model within its class.
Frequently Asked Questions
Which oil filter is recommended for the Cr960?
For optimal engine performance, the recommended oil filter for the CR960 is the F2NN6714AB - Filter, Oil.
What hydraulic filter fits the Cr960 combine?
A high-quality hydraulic spin-on filter for the CR960 is the 81863799 - Filter, Hydraulic; Spin On.
Which rasp bar is suitable for the CR960's rotor system?
For effective threshing and separation in the CR960's rotor system, consider the 9800347 - Rasp Bar; LH Rotor, (Set of 2) (Trailing).
What are common parts needed for the Cr960?
Commonly needed replacement parts for the CR960 include the 84437624 - Blade, Straw Chopper, 87315599 - Belt; Shaker Shoe Drive, 86548970 - Bearing, Flange, 84459072 - Bushing, Rubber; Upper Shoe Drive, 84437648 - Sprocket, Driven; Clean Grain Elevator, and the 295006A1 - Reciever / Drier.

84814042 - Steering Cylinder End
SKU: 84814042
Out of stock

84442906 - Short Threaded Tie Rod
SKU: 84442906
135 in stock

84438982 - Splined; Planetary Drive Coupling
SKU: 84438982
Out of stock

84069687 - Transmission Output Shaft
SKU: 84069687
1 in stock

87580100 - Chopper Drive Belt
SKU: 87580100
Out of stock

87580099 - Beater Drive Belt
SKU: 87580099
29 in stock

87580097 - Main Drive Belt
SKU: 87580097
17 in stock

87315599 - Shaker Shoe Drive Belt
SKU: 87315599
18 in stock

87053803 - Rotor Variator Belt
SKU: 87053803
4 in stock

87011585 - Unloading Auger Drive Belt
SKU: 87011585
1 in stock

84072421 - LH Belt; Secondary Straw Elevator Drive
SKU: 84072421
7 in stock

84058339 - RH (1144 MM) Belt Set; Returns Elevator Drive
SKU: 84058339
427 in stock

9847313-LED - Replacement For #894 Bulb 1000 Lumens Bulb; LED
SKU: 9847313-LED
11 in stock

9847313 - 12V 37.5W #894 Bulb
SKU: 9847313
50 in stock

9703399-LED - Replaces Bulb #H3 1000 Lumens Bulb; LED
SKU: 9703399-LED
288 in stock

89626322 - Bulb
SKU: 89626322
387 in stock

87283179 - Inner H4-12V Bulb
SKU: 87283179
73 in stock

86508168 - Relief Valve Seal Kit
SKU: 86508168
19 in stock

011N - O-Ring Replacement (10 pk)
SKU: 011N
191 in stock

84320293 - See Application For Usage Gas Strut
SKU: 84320293
15 in stock

87033212 - Expansion Valve (block type)
SKU: 87033212
79 in stock

87000227 - A/C High Pressure Switch
SKU: 87000227
2 in stock

84058791 - Receiver/Drier
SKU: 84058791
3 in stock

295006A1 - Reciever / Drier
SKU: 295006A1
1162 in stock








