Ford New Holland CR980 Combine Parts
Ford New Holland CR980 Combine parts in stock. Quality OEM and aftermarket replacement parts with fast shipping and competitive prices.
The Ford New Holland CR980 combine, produced from the late 1990s into the early 2000s, was a powerful and high-capacity machine favored for its harvesting efficiency. Equipped with engines up to 360 HP and accommodating wide headers, the CR980 featured a rotary separator known for its gentle grain handling and high throughput. Farmers appreciated the CR980 for its reliability and ability to tackle demanding harvesting conditions.
About the Cr980
The Ford New Holland CR980 was a flagship combine model introduced in the late 1990s and continued production into the early 2000s. It was designed to deliver high throughput and grain quality. The CR980 typically featured a Cummins or Iveco diesel engine, producing around 360 horsepower with a displacement around 8.3 liters. The combine utilized a Twin Rotor separator system, designed for efficient threshing and separation, minimizing grain loss, and handling diverse crops. Grain tank capacity was approximately 300 bushels. The unloading auger could empty the tank at a rate of around 3 bushels per second or 180 bu/min. Available header widths ranged from 30 to 40 feet, depending on the crop and harvesting conditions. Chopper and spreader options were available to manage crop residue. The cab was designed for operator comfort, featuring air conditioning, adjustable seating, and advanced monitoring systems. The CR980 excelled in harvesting wheat, corn, soybeans, and other small grains due to its high capacity and gentle grain handling capabilities.
Cr980 Specifications
| Engine | Iveco 360 HP 8.3L Diesel |
|---|---|
| Separator Type | Twin Rotor - Longitudinal Rotors |
| Grain Tank | 300 bushels |
| Unloading Rate | 180 bu/min |
| Header Widths | 30-40 ft |
| Fuel Capacity | 200 gallons |
| Weight | 28,000 lbs |
| Years Produced | Late 1990s - Early 2000s |
Cr980 Maintenance Tips
- Concave Adjustment: Regularly inspect and adjust concaves according to the crop being harvested. Proper adjustment minimizes grain loss and damage.
- Belt and Chain Tension: Check and maintain proper tension on all belts and chains to prevent slippage, premature wear, and potential breakdowns.
- Sieve and Chaffer Cleaning: Regularly clean sieves and chaffers to ensure optimal air flow and separation, preventing grain loss over the back.
- Bearing Greasing: Follow the recommended greasing schedule for all bearings to ensure smooth operation and extend their lifespan.
Cr980 History & Background
The Ford New Holland CR980 was introduced to meet the demand for higher capacity combines in the late 1990s. It represented a significant advancement in rotary combine technology, offering improved grain handling and reduced losses compared to earlier models. The CR980 played a key role in modernizing grain harvesting practices, especially on larger farms.
Frequently Asked Questions
Which primary air filter is recommended for the Ford New Holland CR980?
The recommended primary air filter for the CR980 is AF25557 - Filter, Air, Primary Magnum RS (QTY 1).
What is the replacement grain tank bottom rear auger for the CR980?
For the grain tank bottom rear, standard unload, an extended wear auger is 87280343 - Auger, Grain Tank Bottom; Rear, Std Unload, Ext. Wear.
Which rasp bar set is available for the CR980's left hand rotor?
A suitable trailing rasp bar set for the LH rotor is 84060998 - Rasp Bar; LH Rotor, (Set Of 3), (Trailing).
What are common replacement parts for the Ford New Holland CR980 combine?
For maintaining optimal performance, consider these common replacement parts: 87651759 - Concave Kit; Small Grain (Abrasion Resistant), 84050520 - Rasp Bar; RH Rotor, (Set Of 3), (Leading), 84058339 - Belt Set; Returns Elevator Drive, RH (1144 MM), 87372057 - Chain; Feeder House, and 87044350 - Bearing; Ball.

84440974 - Transmission Half (RH) Drive Shaft
SKU: 84440974
Out of stock

84440165 - Transmission Half (RH) Drive Shaft
SKU: 84440165
1 in stock

87053803 - Rotor Variator Belt
SKU: 87053803
4 in stock

84058339 - RH (1144 MM) Belt Set; Returns Elevator Drive
SKU: 84058339
427 in stock

87000227 - A/C High Pressure Switch
SKU: 87000227
2 in stock

87491650 - Wide Upper Shaker Shoe
SKU: 87491650
Out of stock

87109850 - Lower; Closz Slat Sieve
SKU: 87109850
21 in stock

87109846 - Lower Closz Slat Sieve
SKU: 87109846
26 in stock

87109842-R - Rigid Air Foil Chaffer
SKU: 87109842-R
9 in stock

87109842 - Top Adjustable Air Foil Chaffer
SKU: 87109842
10 in stock

87109834 - Corn Upper; 1-5/8" Sieve
SKU: 87109834
7 in stock

87109830 - Upper Closz Slat Sieve
SKU: 87109830
12 in stock

87109826 - Closz Slat PreSieve
SKU: 87109826
12 in stock

87109817 - Grain; Closz Slat PreSieve
SKU: 87109817
14 in stock

87651759 - Small Grain (Abrasion Resistant) Concave Kit
SKU: 87651759
23 in stock

87623214 - Right Hand (3PK) Lug
SKU: 87623214
86 in stock

84060998 - (Trailing) (Set Of 3) Rasp Bar; LH Rotor
SKU: 84060998
Out of stock

84060997 - (Trailing) (Set Of 3) Rasp Bar; RH Rotor
SKU: 84060997
4 in stock

84050520 - (Leading) (Set Of 3) Rasp Bar; RH Rotor
SKU: 84050520
29 in stock

84050519 - (Leading) (Set Of 3) Rasp Bar; LH Rotor
SKU: 84050519
1 in stock

87372057 - Feeder House Chain
SKU: 87372057
Out of stock

87283765 - 26.968" Extended Wear Auger; Bubble Up
SKU: 87283765
Out of stock

87283757 - 42.283" Extended Wear Auger; Upper Bubble Up
SKU: 87283757
4 in stock

87283749 - Extended Wear Auger; Lower Bubble Up
SKU: 87283749
7 in stock








