Ford New Holland TX68 Combine Parts
Browse Ford New Holland TX68 Combine replacement parts. Everything from routine maintenance items to hard-to-find components.
The Ford New Holland TX68 combine, popular throughout the 1990s, delivered reliable performance in various harvesting conditions. This combine features a powerful engine ranging in HP, accommodating header widths up to a certain length. Its conventional separator system made it a favorite among farmers seeking a dependable and efficient harvesting solution for wheat, corn, and soybeans.
About the Tx68
The Ford New Holland TX68, manufactured during the 1990s, was a popular combine known for its robust design and efficient harvesting capabilities. Powering the TX68 was a [Engine Brand] diesel engine, producing approximately [HP] horsepower with a displacement of [Displacement]. This engine provided ample power for tackling demanding harvesting conditions. The TX68 utilizes a conventional threshing and separating system, employing a [Cylinder Width] wide cylinder with rasp bars and a multi-walker straw walker system. The grain tank boasts a capacity of approximately [Bushels] bushels, allowing for extended harvesting intervals. Unloading is swift with an auger capable of unloading at a rate of [Bu/min] bushels per minute. Header widths ranged from [Widths] feet, accommodating various field sizes. Options included a straw chopper or spreader for residue management. The cab provided operators with a comfortable workspace, featuring controls for threshing speed, fan speed, and header height. The TX68 excelled in harvesting a wide range of crops, including wheat, soybeans, corn, and barley.
Tx68 Specifications
| Engine | [Engine Brand] [HP] HP [Displacement] Diesel |
|---|---|
| Separator Type | Conventional - [Cylinder Width] wide cylinder |
| Grain Tank | [Bushels] bushels |
| Unloading Rate | [Bu/min] bu/min |
| Header Widths | [Widths] ft |
| Fuel Capacity | [Gallons] gallons |
| Weight | [Weight] lbs |
| Years Produced | 1990s |
Tx68 Maintenance Tips
- Concave Adjustment: Regularly inspect and adjust the concave clearance to ensure optimal threshing performance and minimize grain damage. Refer to the operator's manual for specific settings for different crops.
- Belt and Chain Tension: Routinely check and adjust belt and chain tension to prevent slippage and ensure efficient power transmission. Replace worn belts and chains promptly.
- Sieve and Chaffer Cleaning: Clean sieves and chaffers regularly to prevent buildup of debris and maintain optimal cleaning efficiency. Use compressed air or a brush to remove accumulated material.
- Bearing Greasing: Grease all bearings according to the manufacturer's recommendations to prevent premature wear and failure. Pay close attention to bearings in high-stress areas like the header and threshing cylinder.
Tx68 History & Background
The Ford New Holland TX68 combine was introduced in the 1990s, solidifying Ford New Holland's presence in the combine harvester market. It was praised for its reliable performance and relatively simple design, making it a popular choice for farmers looking for a dependable and easy-to-maintain combine. While not a revolutionary design, it represents a strong example of conventional combine technology during its era.
Frequently Asked Questions
Which oil filter fits the Ford New Holland TX68?
For the Ford New Holland TX68, the recommended oil filter is 81879134 - Oil Filter.
What replacement flange bearing is suitable for the TX68?
A suitable replacement flange bearing for the TX68 is 86548970 - Bearing, Flange.
What rasp bar set is recommended for the TX68's threshing system?
For the TX68's conventional threshing system, a complete 733639 - Rasp Bar Set, including 4 LH and 4 RH bars with hardware, is recommended.
What are common wear parts needed for the Tx68?
Regular maintenance on the TX68 often requires replacement of components such as the 429215 - Chain, Clean Grain Elevator, 338222 - Bushing, Shaker Shoe, Upper, AF25557 - Filter, Air, Primary Magnum RS, 86013886 - Tensioner, Belt, and 84459072 - Bushing, Rubber; Upper Shoe Drive. Ensuring these parts are in good condition helps maintain optimal combine performance.

C5NN13N359E - Warning Lamp / Turn Signal (12 Volt)
SKU: C5NN13N359E
96 in stock

87283179-LED - Replacement For H4 Bulb 600 Lumens Bulb; LED
SKU: 87283179-LED
190 in stock

87283179 - Inner H4-12V Bulb
SKU: 87283179
73 in stock

130609 - AMBER FL LIGHT
SKU: 130609
96 in stock

801-432 - Bolt-On Chrome 11ga Top Serrated 10' (RH)
SKU: 801-432
Out of stock

87033212 - Expansion Valve (block type)
SKU: 87033212
79 in stock

1990756C2 - Expan.Valve
SKU: 1990756C2
79 in stock

9831928 - Cleaning Shoe Pivot Frame Shaft
SKU: 9831928
7 in stock

9811082 - Upper Shoe Arm Bushing
SKU: 9811082
17 in stock

84459072 - Rubber; Upper Shoe Drive Bushing
SKU: 84459072
354 in stock

84446877 - Upper Bearing; Shoe Drive Housing
SKU: 84446877
Out of stock

84000052 - Rubber; Shaker Shoe Bushing
SKU: 84000052
84 in stock

434817 - Cleaning Shoe Pivot Frame Roller
SKU: 434817
143 in stock

338222 - Upper Shaker Shoe Bushing
SKU: 338222
104 in stock

320033 - Shaker Shoe Bearing Half Housing
SKU: 320033
700 in stock

733639 - 4 LH / 4 RH Bars (w/ Hardware) Rasp Bar Set
SKU: 733639
Out of stock

84038625 - Feeder House Chain (Inner) Sprocket
SKU: 84038625
Out of stock

87693856 - Clean Grain Cover
SKU: 87693856
6 in stock

87605590 - Elevator Head / Bubble Up Auger Bearing
SKU: 87605590
205 in stock

86620026 - Triangular Flange
SKU: 86620026
Out of stock

429215 - Clean Grain Elevator Chain
SKU: 429215
3 in stock

429232 - Cleaning Shoe Pivot Frame Bushing
SKU: 429232
154 in stock

86013886 - Belt Tensioner
SKU: 86013886
77 in stock

WF2051J - Spin-On (QTY 1) Water Filter
SKU: WF2051J
Out of stock








