Ford New Holland TX36 Combine Parts
Browse Ford New Holland TX36 Combine replacement parts. Everything from routine maintenance items to hard-to-find components.
The Ford New Holland Tx36 combine, produced from the late 1980s through the 1990s, was a popular choice for farmers seeking a reliable and versatile machine. Typically equipped with a diesel engine ranging from 175 to 200 horsepower, it offered header widths up to 25 feet. The Tx36's conventional separator system and efficient design made it well-suited for harvesting a variety of crops.
About the Tx36
The Ford New Holland Tx36 was introduced as part of Ford New Holland's push to offer efficient and durable harvesting solutions. Production spanned from the late 1980s into the 1990s. Powering the Tx36 was typically a Ford or Iveco diesel engine, delivering between 175 and 200 horsepower, with a displacement usually around 6.6 to 7.5 liters. It employed a conventional threshing system with a large-diameter cylinder and concave. The grain tank capacity could hold around 200-250 bushels, and it featured an unloading auger capable of emptying the tank at a rate of approximately 50-60 bushels per minute. Header widths ranged from 15 to 25 feet, allowing for efficient harvesting in various field conditions. Chopper and spreader options were available to manage residue effectively. The cab offered basic operator comfort and controls. The Tx36 excelled at harvesting wheat, soybeans, and corn, due to its adaptable threshing system and efficient cleaning shoe.
Tx36 Specifications
| Engine | Ford/Iveco 175-200 HP Diesel |
|---|---|
| Separator Type | Conventional - Cylinder 47 inches wide |
| Grain Tank | 200-250 bushels |
| Unloading Rate | 50-60 bu/min |
| Header Widths | 15-25 ft |
| Fuel Capacity | 80 gallons |
| Weight | Approximately 20,000 lbs |
| Years Produced | Late 1980s - 1990s |
Tx36 Maintenance Tips
- Concave Adjustment: Regularly check and adjust the concave clearance to match the crop being harvested, preventing grain damage and ensuring thorough threshing.
- Belt and Chain Tension: Inspect and maintain proper tension on all belts and chains, as slippage can reduce efficiency and cause premature wear.
- Sieve and Chaffer Cleaning: Clean the sieves and chaffer regularly to remove debris and prevent grain loss over the back.
- Bearing Greasing: Grease all bearings at recommended intervals to ensure smooth operation and prevent bearing failure. Prior to each season, give the machine a thorough inspection, replacing worn parts and lubricating all moving components.
Tx36 History & Background
The Ford New Holland Tx36 combined advanced technology of the time with proven harvesting principles. As a conventional combine, it was part of a generation bridging the gap between older, simpler machines and the more complex rotary combines that were gaining popularity. It solidified Ford New Holland's position as a major player in the agricultural equipment market.
Frequently Asked Questions
Which engine oil pump is suitable for the Ford New Holland TX36 combine?
For the Ford New Holland TX36 combine, the recommended replacement engine oil pump is 81868538 - Pump, Engine Oil. This component ensures proper lubrication for the engine's vital moving parts.
What rasp bar set is recommended for the Ford New Holland TX36?
The 733639 - Rasp Bar Set, which includes 4 LH and 4 RH bars with hardware, is an ideal replacement for maintaining optimal threshing performance in your TX36 combine.
Which clean grain elevator chain fits the Ford New Holland TX36 combine?
For your TX36 combine, the correct replacement clean grain elevator chain is 429215 - Chain, Clean Grain Elevator, ensuring efficient transfer of grain to the tank.
What are some essential replacement parts for routine maintenance on the TX36 combine?
For routine maintenance and wear part replacement on your TX36 combine, consider the following: LF3443J - Filter, Lube, Full-Flow Spin-On, AF4060 - Filter, Air, Primary, FF5156J - Filter, Fuel, Spin-On, 86548970 - Bearing, Flange, 84000052 - Bushing, Rubber; Shaker Shoe, and 86013886 - Tensioner, Belt.

C5NN13N359E - Warning Lamp / Turn Signal (12 Volt)
SKU: C5NN13N359E
96 in stock

87283179-LED - Replacement For H4 Bulb 600 Lumens Bulb; LED
SKU: 87283179-LED
190 in stock

87283179 - Inner H4-12V Bulb
SKU: 87283179
73 in stock

130609 - AMBER FL LIGHT
SKU: 130609
96 in stock

801-432 - Bolt-On Chrome 11ga Top Serrated 10' (RH)
SKU: 801-432
Out of stock

9705764 - Compressor w/ Clutch
SKU: 9705764
4 in stock

9704118 - Sanden Style w/ Clutch (9125) New Compressor
SKU: 9704118
34 in stock

9831928 - Cleaning Shoe Pivot Frame Shaft
SKU: 9831928
7 in stock

84459072 - Rubber; Upper Shoe Drive Bushing
SKU: 84459072
354 in stock

84446877 - Upper Bearing; Shoe Drive Housing
SKU: 84446877
Out of stock

84000052 - Rubber; Shaker Shoe Bushing
SKU: 84000052
84 in stock

434817 - Cleaning Shoe Pivot Frame Roller
SKU: 434817
143 in stock

338222 - Upper Shaker Shoe Bushing
SKU: 338222
104 in stock

320033 - Shaker Shoe Bearing Half Housing
SKU: 320033
700 in stock

733639 - 4 LH / 4 RH Bars (w/ Hardware) Rasp Bar Set
SKU: 733639
Out of stock

84038625 - Feeder House Chain (Inner) Sprocket
SKU: 84038625
Out of stock

681627 - Feeder Reverser Gear
SKU: 681627
8 in stock

87605590 - Elevator Head / Bubble Up Auger Bearing
SKU: 87605590
205 in stock

86620026 - Triangular Flange
SKU: 86620026
Out of stock

429215 - Clean Grain Elevator Chain
SKU: 429215
3 in stock

429232 - Cleaning Shoe Pivot Frame Bushing
SKU: 429232
154 in stock

86013886 - Belt Tensioner
SKU: 86013886
77 in stock

81868538 - Engine Oil Pump
SKU: 81868538
56 in stock

WF2072J - Spin-On (QTY 1) Water Filter
SKU: WF2072J
Out of stock








