Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Ford New Holland TR86 Combine Parts

Ford New Holland TR86 Combine parts in stock. Quality OEM and aftermarket replacement parts with fast shipping and competitive prices.

The Ford New Holland TR86 combine, produced from the early 1980s through the early 1990s, was a popular choice for farmers seeking a reliable and efficient grain harvesting solution. With engine horsepower ranging around 215 HP and header widths up to 30 feet, the TR86 offered substantial harvesting capacity. Its twin rotor design provided excellent grain separation, contributing to its widespread adoption and a reputation for high throughput.

About the TR86

The Ford New Holland TR86 combine harvester was a key model in the transition towards rotary threshing technology. Production spanned from the early 1980s into the early 1990s. It featured a Ford 6.6L inline 6-cylinder diesel engine, producing approximately 215 horsepower (actual HP could vary slightly). The TR86 utilized a twin-rotor threshing and separating system, providing improved grain separation compared to conventional cylinder combines. Its grain tank capacity was around 235 bushels, and the unloading auger could discharge grain at a rate of approximately 80 bushels per minute. Available header widths ranged from 13 to 30 feet, accommodating various field sizes and crop types. Chopper and spreader options were available for residue management. The cab offered basic operator comfort and controls for adjusting harvesting parameters. The TR86 excelled in harvesting a variety of crops, including wheat, soybeans, and corn, due to its efficient separation and throughput capabilities.

TR86 Specifications

EngineFord 6.6L 215 HP Diesel
Separator TypeTwin Rotor - 17 inch diameter rotors
Grain Tank235 bushels
Unloading Rate80 bu/min
Header Widths13-30 ft
Fuel Capacity100 gallons
WeightApprox. 20,000 lbs
Years ProducedEarly 1980s - Early 1990s

TR86 Maintenance Tips

  • Regularly inspect and adjust the concave clearance to optimize threshing performance and minimize grain damage.
  • Check belt and chain tension frequently, replacing worn belts or chains to prevent slippage and ensure smooth operation.
  • Clean the sieves and chaffers regularly to maintain optimal airflow and prevent grain loss.
  • Grease all bearings and lubrication points according to the manufacturer's recommendations to prevent premature wear and ensure smooth operation. Consider a pre-season inspection and service to catch any potential issues before harvest.

TR86 History & Background

The Ford New Holland TR86 was introduced in the early 1980s as a successor to earlier Ford New Holland combine models. It represented a significant advancement with its twin-rotor threshing system. The TR86 played a crucial role in popularizing rotary combine technology, improving harvesting efficiency and grain quality for many farmers.

Frequently Asked Questions

Which rasp bar set is recommended for the LH rotor (trailing) on a TR86 combine?

For the trailing position on the LH rotor of your TR86 combine, consider the 9800347 - Rasp Bar; LH Rotor, (Set of 2) (Trailing).

What flange bearing should I use for a Ford New Holland TR86?

A suitable flange bearing for the TR86 is the 86548970 - Bearing, Flange.

Which fuel filter is recommended for the TR86 combine?

The FF185 - Filter, Fuel, Primary Spin-On is a suitable replacement for your TR86 combine.

What are some essential replacement parts for the Ford New Holland TR86?

Showing 1-24 of 99 products
272672 - Final Drive Pinion Shaft
Out of Stock

272672 - Final Drive Pinion Shaft

SKU: 272672

$235.14

Out of stock

86537318 - Drive 193" Belt

86537318 - Drive 193" Belt

SKU: 86537318

$235.94

9 in stock

80259346 - A/C Compressor Belt

80259346 - A/C Compressor Belt

SKU: 80259346

$8.66

221 in stock

574844 - ADAPTOR BEARING

574844 - ADAPTOR BEARING

SKU: 574844

$10.21

873 in stock

48198 - BEARING

48198 - BEARING

SKU: 48198

$14.71

222 in stock

168636 - ADAPTOR BEARING

168636 - ADAPTOR BEARING

SKU: 168636

$10.21

873 in stock

C5NN13N359E - Warning Lamp / Turn Signal (12 Volt)

C5NN13N359E - Warning Lamp / Turn Signal (12 Volt)

SKU: C5NN13N359E

$32.92

96 in stock

9703399-LED - Replaces Bulb #H3 1000 Lumens Bulb; LED

9703399-LED - Replaces Bulb #H3 1000 Lumens Bulb; LED

SKU: 9703399-LED

$19.84

288 in stock

130609 - AMBER FL LIGHT

130609 - AMBER FL LIGHT

SKU: 130609

$33.86

96 in stock

904-022 - (1lb) 7/32 x 5/8" OH Rivet
Out of Stock

904-022 - (1lb) 7/32 x 5/8" OH Rivet

SKU: 904-022

$11.92

Out of stock

801-432 - Bolt-On Chrome 11ga Top Serrated 10' (RH)
Out of Stock

801-432 - Bolt-On Chrome 11ga Top Serrated 10' (RH)

SKU: 801-432

$495.18

Out of stock

211-012 - Heavy Smooth Black

211-012 - Heavy Smooth Black

SKU: 211-012

$2.35

250 in stock

V56662 - 3sp) Rev rotation 3/8" X 4 1/4" shaft Blower Motor (4 wire)   (12volt

V56662 - 3sp) Rev rotation 3/8" X 4 1/4" shaft Blower Motor (4 wire) (12volt

SKU: V56662

$113.89

47 in stock

V35513 - Sub To BM333812

V35513 - Sub To BM333812

SKU: V35513

$113.89

47 in stock

V31505 - Sub To 220-256

V31505 - Sub To 220-256

SKU: V31505

$29.72

73 in stock

V18380 - 3sp) Rev rotation 3/8" X 4 1/4" shaft Blower Motor (4 wire)   (12volt

V18380 - 3sp) Rev rotation 3/8" X 4 1/4" shaft Blower Motor (4 wire) (12volt

SKU: V18380

$113.89

47 in stock

V103596 - 3sp) Rev rotation 3/8" X 4 1/4" shaft Blower Motor (4 wire)   (12volt

V103596 - 3sp) Rev rotation 3/8" X 4 1/4" shaft Blower Motor (4 wire) (12volt

SKU: V103596

$113.89

47 in stock

KB402009 - York w/o Clutch (ER-210-L LH Suction Rotolock Head) New Compressor

KB402009 - York w/o Clutch (ER-210-L LH Suction Rotolock Head) New Compressor

SKU: KB402009

$662.78

18 in stock

E5NN18527AA - 3sp) Rev rotation 3/8" X 4 1/4" shaft Blower Motor (4 wire)   (12volt

E5NN18527AA - 3sp) Rev rotation 3/8" X 4 1/4" shaft Blower Motor (4 wire) (12volt

SKU: E5NN18527AA

$113.89

47 in stock

D6NN19D623A - Rotoloc Head) w/o Clutch (LH Suction Compressor

D6NN19D623A - Rotoloc Head) w/o Clutch (LH Suction Compressor

SKU: D6NN19D623A

$662.78

18 in stock

D2NN19N581B - BLOWER MOTOR

D2NN19N581B - BLOWER MOTOR

SKU: D2NN19N581B

$113.89

47 in stock

9827053 - Receiver Drier

9827053 - Receiver Drier

SKU: 9827053

$47.14

41 in stock

9807217 - 3sp) Rev rotation 3/8" X 4 1/4" shaft Blower Motor (4 wire)   (12volt

9807217 - 3sp) Rev rotation 3/8" X 4 1/4" shaft Blower Motor (4 wire) (12volt

SKU: 9807217

$113.89

47 in stock

9705764 - Compressor w/ Clutch

9705764 - Compressor w/ Clutch

SKU: 9705764

$683.18

4 in stock