Ford New Holland TF44 Combine Parts
Replacement parts for the Ford New Holland TF44 Combine. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.
The Ford New Holland TF44 combine harvester, produced from the late 1980s into the early 1990s, offered farmers a dependable solution for grain harvesting. Equipped with engines ranging up to 175 horsepower and accommodating header widths up to 20 feet, the TF44 was a popular choice for its robust conventional threshing system and straightforward operation. Its reputation for reliability and ease of maintenance made it a staple on many farms.
About the Tf44
The Ford New Holland TF44 combine filled a critical need in the market for a mid-sized, reliable machine. Produced in the late 1980s and early 1990s, it featured a robust engine, typically a Ford diesel offering around 160-175 horsepower and displacing approximately 401 cubic inches (6.6L). This provided ample power for a variety of harvesting conditions. The TF44 employed a conventional threshing system, utilizing a cylinder with a width around 48 inches and a large concave area for efficient grain separation. Grain tank capacity was generally around 170 bushels, with an unloading auger capable of discharging at a rate of 50-60 bushels per minute. Available header widths ranged from 13 to 20 feet, catering to different field sizes and crop densities. Chopper and spreader options were available to manage residue effectively. The cab offered basic comfort and controls for the operator, focusing on functionality over advanced technology. The TF44 excelled at harvesting wheat, soybeans, and corn, offering a balance of performance and affordability.
Tf44 Specifications
| Engine | Ford 160 HP 6.6L Diesel |
|---|---|
| Separator Type | Conventional - 48 inch Cylinder |
| Grain Tank | 170 bushels |
| Unloading Rate | 55 bu/min |
| Header Widths | 13-20 ft |
| Fuel Capacity | 80 gallons |
| Weight | 16,000 lbs |
| Years Produced | Late 1980s - Early 1990s |
Tf44 Maintenance Tips
- Concave Adjustment: Regularly check and adjust the concave clearance to optimize threshing performance and minimize grain damage. Refer to the operator's manual for specific recommendations based on the crop being harvested.
- Belt and Chain Tension: Inspect all belts and chains for proper tension and wear. Loose belts and chains can lead to slippage, reduced efficiency, and premature failure. Adjust or replace as needed.
- Sieve and Chaffer Cleaning: Clean the sieves and chaffer frequently to prevent buildup of debris, which can reduce cleaning efficiency and increase grain loss. Pay close attention to this during humid conditions or when harvesting weedy crops.
- Bearing Greasing: Regularly grease all bearings according to the manufacturer's recommendations. Proper lubrication is essential for preventing bearing failure and extending the life of the combine.
Tf44 History & Background
The Ford New Holland TF44 was introduced as a robust and dependable combine designed to meet the needs of small to mid-sized farms. While not revolutionary in its design, it gained popularity for its reliability and ease of maintenance during a period of increasing technological advancement in combine harvester design. It represented a solid and practical option in the Ford New Holland combine lineup.
Frequently Asked Questions
Which belt tensioner fits the Ford New Holland TF44 combine?
For the Ford New Holland TF44 combine, the recommended replacement belt tensioner is 86013886 - Tensioner, Belt.
What engine oil filter is recommended for the Ford New Holland TF44?
For the Ford New Holland TF44, a suitable engine oil filter is the LF3327 - Filter, Lube, Cartridge, which also cross-references with AC119 and AC156.
Which secondary air filter is used on the Ford New Holland TF44?
The Ford New Holland TF44 combine uses the AF1843 - Filter, Air, Secondary as a replacement. It is also an equivalent for AF4910 and AF2255.
What are common replacement parts for the Ford New Holland TF44 combine?
For the Ford New Holland TF44 combine, frequently replaced items include the 86013886 - Tensioner, Belt, the LF3327 - Filter, Lube, Cartridge, the AF1843 - Filter, Air, Secondary, and the FF146J - Filter, Fuel, Cartridge.

86013886 - Belt Tensioner
SKU: 86013886
77 in stock

LF3327 - Cartridge (QTY 12) Lube Filter
SKU: LF3327
5 in stock

FF146J - Cartridge (QTY 1) Fuel Filter
SKU: FF146J
Out of stock

FF146 - Cartridge (QTY 12) Fuel Filter
SKU: FF146
8 in stock

AF1843 - Secondary (QTY 1) Air Filter
SKU: AF1843
1 in stock








