Ford New Holland CX860 Combine Parts
Replacement parts for the Ford New Holland CX860 Combine. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.
The Ford New Holland CX860 combine, manufactured from approximately 2002-2007, offered farmers a blend of power and reliability for grain harvesting. Equipped with engines around 350-370 HP and available with header widths up to 36 feet, the CX860 utilized a rotary separator, making it popular for its high throughput and efficient grain separation in various crops. Its robust design and operator-friendly features cemented its place in modern agriculture.
About the Cx860
The Ford New Holland CX860 combine represented a significant step forward in harvesting technology when it was introduced in the early 2000s (approx 2002). Production continued for several years, with the model gaining a reputation for dependability and capacity. Powering the CX860 was typically an IVECO engine, delivering between 350-370 horsepower with a displacement around 8.3 liters. The combine featured a rotary separation system, with a single rotor and large cleaning area, increasing efficiency in high-yielding crops. The grain tank held approximately 300 bushels, and the unloading auger could discharge grain at a rate of roughly 3.3 bushels per second (200 bu/min). The CX860 was compatible with a range of header widths, often up to 36 feet, allowing for efficient harvesting across diverse field conditions. Chopper and spreader options were available to manage crop residue effectively. The cab offered enhanced operator comfort with improved visibility and ergonomic controls. It excels in harvesting a variety of grains including wheat, corn, and soybeans, especially suitable for large acreage operations.
Cx860 Specifications
| Engine | IVECO 370 HP 8.3L Diesel |
|---|---|
| Separator Type | Rotary - Single Rotor |
| Grain Tank | 300 bushels |
| Unloading Rate | 200 bu/min |
| Header Widths | Up to 36 ft |
| Fuel Capacity | Unknown gallons |
| Weight | Unknown lbs |
| Years Produced | Approx. 2002-2007 |
Cx860 Maintenance Tips
- Concave Adjustment: Regularly inspect and adjust concaves to match crop conditions to optimize threshing and minimize grain loss.
- Belt and Chain Tension: Check and maintain proper tension on all belts and chains to prevent slippage and ensure efficient power transmission.
- Sieve and Chaffer Cleaning: Clean sieves and chaffers frequently to remove debris and prevent plugging, ensuring clean grain separation.
- Bearing Greasing: Regularly grease all bearings according to the manufacturer's recommendations to prevent premature wear and failure.
Cx860 History & Background
The Ford New Holland CX860 was introduced in the early 2000s as part of the CX series combine harvesters. It aimed to deliver increased capacity and efficiency compared to previous models. While not experiencing major redesigns during its production run, the CX860 marked a continuous improvement in combine technology, emphasizing rotary separation for enhanced performance.
Frequently Asked Questions
Which air filter fits the Ford New Holland CX860?
The AF25557 - Filter, Air, Primary Magnum RS is a suitable replacement for the CX860 model.
Which fuel filter is recommended for the CX860 combine?
For the CX860, the FF5471 - Filter, Fuel, Spin-On provides reliable fuel filtration.
What lower sieve is compatible with the Ford New Holland CX860?
The 87109846 - Sieve, Closz Slat, Lower is a suitable replacement for the CX860.
What are some common replacement parts for the Ford New Holland CX860 combine?
Maintaining optimal performance often requires replacing wear parts such as the 84437624-KIT - Kit, Straw Chopper Blade, 84058339 - Belt Set; Returns Elevator Drive, RH (1144 MM), 87044350 - Bearing; Ball, 84000052 - Bushing, Rubber; Shaker Shoe, 87280343 - Auger, Grain Tank Bottom; Rear, Std Unload, Ext. Wear, and the HF6553 - Filter, Hydraulic, Spin-On.

84814042 - Steering Cylinder End
SKU: 84814042
Out of stock

84442906 - Short Threaded Tie Rod
SKU: 84442906
135 in stock

84440974 - Transmission Half (RH) Drive Shaft
SKU: 84440974
Out of stock

84440165 - Transmission Half (RH) Drive Shaft
SKU: 84440165
1 in stock

84438982 - Splined; Planetary Drive Coupling
SKU: 84438982
Out of stock

84069687 - Transmission Output Shaft
SKU: 84069687
1 in stock

84058339 - RH (1144 MM) Belt Set; Returns Elevator Drive
SKU: 84058339
427 in stock

9847313-LED - Replacement For #894 Bulb 1000 Lumens Bulb; LED
SKU: 9847313-LED
11 in stock

9847313 - 12V 37.5W #894 Bulb
SKU: 9847313
50 in stock

89626322 - Bulb
SKU: 89626322
387 in stock

87283179-LED - Replacement For H4 Bulb 600 Lumens Bulb; LED
SKU: 87283179-LED
190 in stock

87283179 - Inner H4-12V Bulb
SKU: 87283179
73 in stock

011N - O-Ring Replacement (10 pk)
SKU: 011N
191 in stock

84320293 - See Application For Usage Gas Strut
SKU: 84320293
15 in stock

87033212 - Expansion Valve (block type)
SKU: 87033212
79 in stock

84058791 - Receiver/Drier
SKU: 84058791
3 in stock

1990756C2 - Expan.Valve
SKU: 1990756C2
79 in stock

84437624-KIT - Straw Chopper Blade Kit
SKU: 84437624-KIT
50 in stock

84437624 - Straw Chopper Blade
SKU: 84437624
50 in stock

31344815 - Straw Chopper Blade Bushing
SKU: 31344815
83 in stock

9831928 - Cleaning Shoe Pivot Frame Shaft
SKU: 9831928
7 in stock

9811082 - Upper Shoe Arm Bushing
SKU: 9811082
17 in stock

87109846 - Lower Closz Slat Sieve
SKU: 87109846
26 in stock

87109817 - Grain; Closz Slat PreSieve
SKU: 87109817
14 in stock








