Ford New Holland CX740 Combine Parts
Ford New Holland CX740 Combine parts in stock. Quality OEM and aftermarket replacement parts with fast shipping and competitive prices.
The Ford New Holland CX740 combine, a workhorse on farms from the mid-2000s onward, delivered reliable performance for grain harvesting. Typically featuring engine horsepower in the 300-350 range and header widths up to 30 feet, the CX740 offered a balance of power and efficiency. Its conventional separator design made it a favorite for farmers looking for a dependable machine for wheat, soybeans, and corn harvesting.
About the Cx740
The Ford New Holland CX740 series was introduced to provide farmers with a mid-sized combine offering a blend of performance and value. Production years typically spanned the mid to late 2000s. Powering the CX740 is often a FPT (Fiat Powertrain Technologies) engine, commonly a 6.7-liter diesel producing around 330 horsepower. The threshing system uses a conventional cylinder with multiple rasp bars and a large concave area to efficiently separate grain from the crop. Grain tank capacity usually sits around 270 bushels, with unloading auger speeds of approximately 80-100 bushels per minute. Available header widths ranged from 20 to 30 feet, accommodating various field sizes and crop conditions. Chopper and spreader options allowed for residue management tailored to specific farming practices. The cab offers operator comfort and good visibility, crucial for long hours in the field. The CX740 excels in harvesting wheat, soybeans, and corn, making it a versatile machine for diverse farming operations.
Cx740 Specifications
| Engine | FPT 6.7L 330 HP Diesel |
|---|---|
| Separator Type | Conventional - 63 inch cylinder width |
| Grain Tank | 270 bushels |
| Unloading Rate | 90 bu/min |
| Header Widths | 20-30 ft |
| Fuel Capacity | 158 gallons |
| Weight | Approx. 28,000 lbs |
| Years Produced | Mid - Late 2000s |
Cx740 Maintenance Tips
- Regularly check and adjust concave clearance according to the crop being harvested to optimize threshing performance and minimize grain damage.
- Inspect belt and chain tension frequently, ensuring proper alignment and tension to prevent slippage, wear, and potential breakdowns during operation.
- Clean sieves and chaffers regularly to remove debris and ensure proper airflow, which is crucial for efficient grain separation and minimizing losses.
- Grease all bearings and lubrication points according to the manufacturer's recommendations to prevent premature wear and ensure smooth operation of moving parts.
Cx740 History & Background
The Ford New Holland CX740 was a key model in the New Holland combine lineup, representing a solid, dependable machine with a conventional threshing system. It built upon the success of previous models and offered improved features for enhanced harvesting performance. Its introduction marked a continuation of New Holland's commitment to providing farmers with reliable and efficient harvesting solutions.
Frequently Asked Questions
Which air filter is recommended for the Ford New Holland CX740?
For optimal engine protection in the Ford New Holland CX740, the AF25557 - Filter, Air, Primary Magnum RS is a suitable replacement.
What oil filter fits the Ford New Holland CX740 combine?
The recommended oil filter for the Ford New Holland CX740 combine is the LF3861J - Filter, Lube, Spin-On.
What upper sieve is compatible with the Ford New Holland CX740?
The 87109836 - Sieve, Closz Slat, Upper is designed for use in the Ford New Holland CX740 combine for effective grain separation.
What are common parts needed for the Cx740?
For the Ford New Holland CX740, frequently replaced components include the 87283765 - Auger; Bubble Up, Extended Wear, 86013886 - Tensioner, Belt, FF5457J - Filter, Fuel, Spin-On, HF6553 - Filter, Hydraulic, Spin-On, FS1287J - Separator, Fuel/Water, Spin-On, and the AF27866 - Filter, Air.

87109836 - Upper Closz Slat Sieve
SKU: 87109836
2 in stock

87283765 - 26.968" Extended Wear Auger; Bubble Up
SKU: 87283765
Out of stock

86013886 - Belt Tensioner
SKU: 86013886
77 in stock

LF3861J - Spin-On (QTY 1) Lube Filter
SKU: LF3861J
Out of stock

LF3861 - Spin-On (QTY 12) Lube Filter
SKU: LF3861
56 in stock

HF6555 - Spin-On (QTY 1) Hydraulic Filter
SKU: HF6555
114 in stock

HF6554 - Spin-On (QTY 1) Hydraulic Filter
SKU: HF6554
3 in stock

HF6553 - Spin-On (QTY 1) Hydraulic Filter
SKU: HF6553
43 in stock

FS19687J - Fuel/Water (QTY 1) Separator
SKU: FS19687J
Out of stock

FS19687 - Fuel/Water (QTY 6) Separator
SKU: FS19687
Out of stock

FS1287J - Spin-On (QTY 1) Fuel/Water Separator
SKU: FS1287J
Out of stock

FS1287 - Spin-On (QTY 12) Fuel/Water Separator
SKU: FS1287
23 in stock

FF5457J - Spin-On (QTY 1) Fuel Filter
SKU: FF5457J
Out of stock

FF5457 - Spin-On (QTY 12) Fuel Filter
SKU: FF5457
20 in stock

AF27866 - Air (QTY 1) Filter
SKU: AF27866
7 in stock

AF25557 - Primary Magnum RS (QTY 1) Air Filter
SKU: AF25557
65 in stock








