John Deere W330 Combine Parts
Find parts for your John Deere W330 Combine. We stock OEM and quality aftermarket replacements ready to ship.
The John Deere W330 combine, manufactured from 2013 to 2016, offered farmers a reliable and efficient harvesting solution. Powered by a 168 HP engine and available with header widths up to 20 feet, this conventional combine gained popularity for its ease of use, affordability, and suitability for smaller to medium-sized farms. Its robust design and simplified mechanics made it a dependable choice for harvesting wheat, soybeans, and other grains.
About the W330
The John Deere W330 combine was introduced in 2013 as a part of John Deere's W-Series combines, aimed at providing a more accessible option for farmers who didn't require the scale of larger rotary models. Production continued through 2016. The W330 is powered by a John Deere PowerTech™ 4.5L 4-cylinder diesel engine producing 168 horsepower (125 kW). This engine provides ample power for threshing and separating in varied field conditions. The threshing system utilizes a conventional rasp bar cylinder, providing efficient separation of grain from the crop. The grain tank capacity is approximately 220 bushels (7750 liters), allowing for extended operation between unloading. The unloading auger boasts a rate of approximately 50 bushels per minute. Available header widths ranged from 13 to 20 feet, providing flexibility to match field size and crop density. A straw chopper and spreader were offered as optional equipment, facilitating residue management and even distribution across the field. The cab features a comfortable operator environment with intuitive controls and clear visibility. The W330 excels at harvesting wheat, soybeans, barley, and other small grains due to its effective conventional threshing system and adaptable header options.
W330 Specifications
| Engine | John Deere PowerTech™ 168 HP 4.5L Diesel |
|---|---|
| Separator Type | Conventional - 42-inch Cylinder |
| Grain Tank | 220 bushels |
| Unloading Rate | 50 bu/min |
| Header Widths | 13-20 ft |
| Fuel Capacity | 80 gallons |
| Weight | Approximately 19,000 lbs |
| Years Produced | 2013-2016 |
W330 Maintenance Tips
- Concave Adjustment: Regularly check and adjust concave clearance to ensure optimal threshing performance and minimize grain damage. Refer to the operator's manual for recommended settings based on the crop being harvested.
- Belt and Chain Tension: Inspect belt and chain tension frequently and adjust as needed to prevent slippage and premature wear. Proper tension ensures efficient power transfer and reduces the risk of component failure.
- Sieve and Chaffer Cleaning: Regularly clean the sieves and chaffer to remove debris and prevent plugging, ensuring efficient grain cleaning and minimizing losses.
- Bearing Greasing: Grease all bearings according to the manufacturer's recommendations to maintain proper lubrication and extend component life. Pay particular attention to bearings in high-stress areas such as the header and threshing unit.
W330 History & Background
The John Deere W330 was introduced in 2013 as a part of the W-Series lineup, filling a niche for farmers seeking a smaller, more affordable conventional combine. It served as a reliable option before being discontinued in 2016 as market demands shifted towards larger, more technologically advanced machines. Though its production run was relatively short, the W330 remains a respected model for its simplicity and dependability.
Frequently Asked Questions
Which water pump fits the John Deere W330 combine?
The recommended replacement water pump for the John Deere W330 combine is RE500734 - Water Pump.
What fuel/water separator filter is recommended for the W330?
For optimal fuel system protection, the RE522878 - Filter, Separator, Fuel/Water is suitable for the W330.
Which head gasket should I use for a John Deere W330 engine overhaul?
When performing an engine overhaul on your W330, the R116516 - Gasket, Head is a compatible replacement.
What are common replacement parts for routine maintenance on the W330?
Regular maintenance for your John Deere W330 often requires replacement of wear components such as the CQ31965 - Belt, Clean Grain Elevator Drive, RE65908 - Bearing, Connecting Rod (Std), and AR92893 - Seal, Rear Crankshaft W/ Wear Sleeve. Other frequently replaced items include the R90692 - Valve, Exhaust (Std), R519488 - Gasket; Exhaust Manifold, and RE548027 - Belt Tensioner.

T20073 - Camshaft Follower
SKU: T20073
131 in stock

RE69243 - Engine Oil Dipstick
SKU: RE69243
217 in stock

RE65912 - Thrust (.010") Bearing
SKU: RE65912
73 in stock

RE65911 - Main (.010") Bearing
SKU: RE65911
721 in stock

RE65909 - Connecting Rod (.010") Bearing
SKU: RE65909
79 in stock

RE65908 - Connecting Rod (Std) Bearing
SKU: RE65908
7182 in stock

RE65168 - Thrust (Std) Bearing
SKU: RE65168
627 in stock

RE65165 - Main (Std) Bearing
SKU: RE65165
6921 in stock

RE59810 - Front Crankshaft Seal
SKU: RE59810
61 in stock

RE57604 - Dual; Heavy Duty Torsional Damper
SKU: RE57604
Out of stock

RE56690 - 7 Plate Engine Oil Cooler
SKU: RE56690
Out of stock

RE560091 - Fuel Suction Control Valve
SKU: RE560091
114 in stock

RE550942 - Turbocharger
SKU: RE550942
79 in stock

RE548027 - Belt Tensioner
SKU: RE548027
143 in stock

RE536083 - Piston Liner Kit
SKU: RE536083
32 in stock

RE532841 - Upper Gasket Set
SKU: RE532841
19 in stock

RE532631 - Complete Overhaul Gasket Set
SKU: RE532631
49 in stock

RE527039 - Piston
SKU: RE527039
23 in stock

RE522794 - Fuel Pressure Sensor
SKU: RE522794
2 in stock

RE519696 - Water In Fuel Sensor
SKU: RE519696
161 in stock

RE516553 - Fuel Filter Seal Kit
SKU: RE516553
232 in stock

RE508317 - W/ Adjusting Screw Rocker Arm
SKU: RE508317
64 in stock

RE505921 - Taper Nose Crankshaft
SKU: RE505921
3 in stock

RE504914 - Engine Oil Pump
SKU: RE504914
62 in stock








