John Deere 55 Combine Parts
Find parts for your John Deere 55 Combine. We stock OEM and quality aftermarket replacements ready to ship.
The John Deere 55 combine, produced from 1956 to 1969, was a popular choice for farmers needing a reliable and versatile harvesting solution. Equipped with engines typically ranging from 75 to 95 horsepower, and available with header widths up to 13 feet, the 55 utilized a conventional separator system. Its affordability and ease of maintenance contributed significantly to its widespread adoption in smaller to medium-sized farming operations.
About the 55
The John Deere 55 combine was a workhorse in fields across America during its production run from 1956 to 1969. These combines were typically equipped with a John Deere gasoline engine, delivering between 75 and 95 horsepower, or a diesel variant in later years. The engine displacement varied depending on the specific model year and fuel type. The 55 featured a conventional threshing system, employing a cylinder and concave setup for efficient grain separation. The grain tank capacity was approximately 50 bushels, with an unloading auger capable of discharging grain at a rate of around 15-20 bushels per minute. Available header widths ranged from 10 to 13 feet, catering to different field sizes and crop densities. Chopper and spreader options were available to manage crop residue. Cab features were minimal compared to modern combines, but operators appreciated the simplicity and ease of operation. The John Deere 55 proved especially adept at harvesting wheat, soybeans, and corn, making it a versatile choice for diversified farming operations.
55 Specifications
| Engine | John Deere 75-95 HP Gas/Diesel |
|---|---|
| Separator Type | Conventional - Cylinder & Concave |
| Grain Tank | 50 bushels |
| Unloading Rate | 15-20 bu/min |
| Header Widths | 10-13 ft |
| Fuel Capacity | Approx. 25 gallons |
| Weight | Approx. 6,000 lbs |
| Years Produced | 1956-1969 |
55 Maintenance Tips
- Concave Adjustment: Regularly inspect and adjust the concave clearance based on the crop being harvested. Proper adjustment minimizes grain loss and maximizes threshing efficiency.
- Belt and Chain Tension: Maintain proper tension on all belts and chains. Loose belts can slip, reducing performance and causing premature wear. Similarly, loose chains can jump sprockets and lead to breakdowns.
- Sieve and Chaffer Cleaning: Periodically clean the sieves and chaffer to remove crop residue and debris. Clogged sieves reduce airflow and increase grain loss over the back.
- Bearing Greasing: Grease all bearings regularly according to the manufacturer's recommendations. Proper lubrication prevents overheating and extends bearing life.
55 History & Background
The John Deere 55 was introduced in 1956 as a more compact and affordable combine option for smaller farms. It filled a crucial gap in the market, offering farmers a reliable harvesting solution without the expense of larger models. While there were minor updates throughout its production run, the fundamental design remained largely consistent, solidifying its reputation as a durable and dependable machine.
Frequently Asked Questions
Which starter drive is compatible with the John Deere 55 combine?
The AR54923 - Starter Drive (Delco) is a direct replacement for the John Deere 55 combine.
What air filter is recommended for the John Deere 55 combine?
For optimal engine performance, the AF409K - Filter, Air, Primary (QTY 1) is recommended for the John Deere 55 combine.
What ignition coil fits the John Deere 55 combine?
The AR46064 - Ignition Coil - 6 Volt or 12 Volt w/ Resistor is a suitable replacement for the John Deere 55 combine.
What are common replacement parts needed for the John Deere 55 combine?
For routine maintenance and wear, common parts for the John Deere 55 combine include the LF678J - Filter, Lube, Full-Flow Spin-On (QTY 1), JD9449 - Bearing, Pilot: .669" I.D., 21A1R - Tune Up Kit, AH21440 - Sprocket, Idler, TY26545 - Seat Cushion Kit; 3 Piece, Yellow Vinyl, and AH171588 - Straw Chopper Knife, Set of 6.

T556T - Valve Guide
SKU: T556T
8 in stock

T12357 - Exhaust Valve
SKU: T12357
Out of stock

T12356 - Intake Valve
SKU: T12356
1 in stock

RE19733 - Connecting Rod W/ Bushing
SKU: RE19733
45 in stock

R82821 - Camshaft
SKU: R82821
6 in stock

411-042 - Black 12ga Top Serrated
SKU: 411-042
330 in stock

AH171588 - Set of 6 Straw Chopper Knife
SKU: AH171588
103 in stock

AP24354 - Flanged Idler Pulley
SKU: AP24354
24 in stock

AH21440 - Idler Sprocket
SKU: AH21440
26 in stock

N104147 - Coupler Sprocket
SKU: N104147
Out of stock

AP26767 - MUFFLER
SKU: AP26767
Out of stock

AH11014 - MUFFLER
SKU: AH11014
Out of stock

PR209 - Piston Rings
SKU: PR209
6 in stock

AT344T - Front Crankshaft and PTO Seal
SKU: AT344T
43 in stock

AT21119 - Connecting Rod (.020") Bearing
SKU: AT21119
5 in stock

AT21117 - Connecting Rod (.010") Bearing
SKU: AT21117
35 in stock

AT14199 - Rear Main Seal
SKU: AT14199
10 in stock

AT10123 - Connecting Rod (Std) Bearing
SKU: AT10123
55 in stock

AA5334R - Sediment Bowl Assembly
SKU: AA5334R
219 in stock

TY24309 - Motorola Alternator
SKU: TY24309
10 in stock

R11260 - Rotor
SKU: R11260
155 in stock

AT21719 - Tune Up Kit
SKU: AT21719
89 in stock

AT14465 - Tune Up Kit
SKU: AT14465
82 in stock

AR54923 - Starter Drive (Delco)
SKU: AR54923
22 in stock








