Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

John Deere 1550 Combine Parts

Shop John Deere 1550 Combine parts. From filters and fluids to blades and belts, we carry the replacements you need to keep running.

The John Deere 1550 combine, manufactured from 1991-1994, was a popular choice for farmers seeking a reliable and efficient harvesting solution. With engine options delivering around 175 horsepower, the 1550 offered ample power for a variety of crops. Available with header widths up to 30 feet, and utilizing a conventional separator, the 1550 delivered a balance of performance and ease of maintenance that resonated with operators.

About the 1550

The John Deere 1550 combine was introduced as a part of John Deere's updated line of conventional combines, produced from 1991 to 1994. It built upon the reliability of previous models while incorporating advancements in operator comfort and efficiency. Power came from a John Deere 6.8L 6-cylinder diesel engine producing approximately 175 horsepower, with a displacement of 414 cubic inches. The threshing system was a conventional cylinder and concave design, known for its effectiveness in a range of crop conditions. The grain tank held approximately 150 bushels, and unloading was accomplished at a rate of around 60 bushels per minute. Available header widths ranged from 13 to 30 feet, allowing for customization based on field size and crop type. Chopper and spreader options were available to manage residue effectively. The cab featured improved visibility and controls compared to earlier models, enhancing operator comfort. The 1550 was especially well-suited for harvesting wheat, soybeans, and corn in smaller to medium-sized fields, offering a cost-effective and dependable harvesting solution.

1550 Specifications

EngineJohn Deere 6.8L 175 HP Diesel
Separator TypeConventional - 43 inch Cylinder Width
Grain Tank150 bushels
Unloading Rate60 bu/min
Header Widths13-30 ft
Fuel Capacity85 gallons
WeightApprox. 17,000 lbs
Years Produced1991-1994

1550 Maintenance Tips

  • Concave Adjustment: Regularly check and adjust concave clearance to ensure optimal threshing performance and minimize grain damage.
  • Belt and Chain Tension: Inspect belts and chains frequently for wear and proper tension. Loose or worn components can lead to reduced efficiency and potential damage.
  • Sieve and Chaffer Cleaning: Clean sieves and chaffers regularly to prevent buildup of debris, which can reduce cleaning efficiency and increase grain loss.
  • Bearing Greasing: Regularly grease all bearings according to the manufacturer's recommendations. Proper lubrication is crucial for extending the life of bearings and preventing costly repairs.

1550 History & Background

The John Deere 1550 was introduced in 1991 as an update to John Deere's conventional combine lineup. It offered improvements in operator comfort and efficiency while maintaining the proven reliability of its predecessors. The 1550 represents a key model in John Deere's history, demonstrating their commitment to providing versatile and dependable harvesting solutions.

Frequently Asked Questions

What starter is recommended for the John Deere 1550 combine?

For the John Deere 1550 combine, the recommended replacement starter is RE523502 - Starter.

Which grain tank unloading belt fits the John Deere 1550?

The correct grain tank unloading belt for the 1550 combine is CQ03265 - Belt; Grain Tank Unloading.

What fan drive belt is suitable for the John Deere 1550?

The recommended fan drive belt for the 1550 combine is CQ40222 - Belt, Fan Drive.

What are common parts needed for the 1550 combine?

Showing 1-24 of 36 products
RE65836 - Water Temp Sender Switch

RE65836 - Water Temp Sender Switch

SKU: RE65836

$37.76

71 in stock

RE57604 - Dual; Heavy Duty Torsional Damper
Out of Stock

RE57604 - Dual; Heavy Duty Torsional Damper

SKU: RE57604

$339.69

Out of stock

RE550942 - Turbocharger

RE550942 - Turbocharger

SKU: RE550942

$1487.00

79 in stock

RE522594 - Side Feed Tube

RE522594 - Side Feed Tube

SKU: RE522594

$43.10

37 in stock

RE516553 - Fuel Filter Seal Kit

RE516553 - Fuel Filter Seal Kit

SKU: RE516553

$12.31

232 in stock

RE51650 - Sediment Bowl

RE51650 - Sediment Bowl

SKU: RE51650

$60.56

279 in stock

RE515636 - Engine Restrictor

RE515636 - Engine Restrictor

SKU: RE515636

$82.72

3 in stock

RE508317 - W/ Adjusting Screw Rocker Arm

RE508317 - W/ Adjusting Screw Rocker Arm

SKU: RE508317

$28.82

64 in stock

RE504914 - Engine Oil Pump

RE504914 - Engine Oil Pump

SKU: RE504914

$194.74

62 in stock

RE500160 - SAE Thread Filter Head Assy

RE500160 - SAE Thread Filter Head Assy

SKU: RE500160

$75.83

82 in stock

RE40048 - Exhaust Clamp

RE40048 - Exhaust Clamp

SKU: RE40048

$34.43

80 in stock

SA00601 - Upper Fan Variator Belt

SA00601 - Upper Fan Variator Belt

SKU: SA00601

$40.85

316 in stock

CQ40222 - Fan Drive Belt

CQ40222 - Fan Drive Belt

SKU: CQ40222

$49.43

176 in stock

CQ31965 - Clean Grain Elevator Drive Belt

CQ31965 - Clean Grain Elevator Drive Belt

SKU: CQ31965

$56.54

103 in stock

CQ17755 - Hydraulic Pump Belt
Out of Stock

CQ17755 - Hydraulic Pump Belt

SKU: CQ17755

$21.88

Out of stock

CQ03265 - Grain Tank Unloading Belt

CQ03265 - Grain Tank Unloading Belt

SKU: CQ03265

$29.97

133 in stock

R27796 - Durometer 70 O-ring; 6.234" ID X .139" Thick

R27796 - Durometer 70 O-ring; 6.234" ID X .139" Thick

SKU: R27796

$4.01

75 in stock

51M7041 - O-ring

51M7041 - O-ring

SKU: 51M7041

$1.39

335 in stock

38H1095 - Swivel 90 DEG Elbow Hydraulic Fitting

38H1095 - Swivel 90 DEG Elbow Hydraulic Fitting

SKU: 38H1095

$14.64

147 in stock

38H1006 - O-RING FSF Elbow Fitting - 90 DEG ELBOW

38H1006 - O-RING FSF Elbow Fitting - 90 DEG ELBOW

SKU: 38H1006

$21.11

92 in stock

38H1004 - O-RING FSF 90 DEG Elbow Fitting

38H1004 - O-RING FSF 90 DEG Elbow Fitting

SKU: 38H1004

$13.19

56 in stock

R123271 - Rocker Arm Support Stud

R123271 - Rocker Arm Support Stud

SKU: R123271

$13.96

21 in stock

R120013 - Turbo Drain Hose

R120013 - Turbo Drain Hose

SKU: R120013

$59.56

299 in stock

DZ114591 - Oil Cooler Gasket

DZ114591 - Oil Cooler Gasket

SKU: DZ114591

$14.92

145 in stock