John Deere 1055 Combine Parts
Shop John Deere 1055 Combine parts. From filters and fluids to blades and belts, we carry the replacements you need to keep running.
The John Deere 1055 combine, produced from 1971-1978, was a workhorse known for its reliability and simplicity. With a John Deere diesel engine delivering around 105 horsepower, it handled various header widths, commonly in the 13-15 foot range. This conventional combine became a popular choice for farmers seeking a dependable and easy-to-maintain machine for harvesting grains like wheat and soybeans.
About the 1055
The John Deere 1055 combine was manufactured from 1971 to 1978, filling a niche in the market for a robust and straightforward harvesting solution. Powering the 1055 was a John Deere 404 cubic inch diesel engine, producing approximately 105 horsepower. This engine provided sufficient power for its conventional threshing system, utilizing a cylinder and concave arrangement to separate grain from the stalk. The grain tank held roughly 85 bushels, and the unloading auger emptied at a rate of approximately 30 bushels per minute. Available header widths typically ranged from 13 to 15 feet. While lacking the sophisticated chopper/spreader options of later models, it efficiently handled crop residue. The cab offered basic operator comfort and controls. The 1055 excelled in harvesting wheat, soybeans, and other small grains where its simple design and robust build proved advantageous. Its reliability and ease of repair made it a favorite among farmers looking for a cost-effective harvesting solution.
1055 Specifications
| Engine | John Deere 404D 105 HP Diesel |
|---|---|
| Separator Type | Conventional - 34-inch Cylinder |
| Grain Tank | 85 bushels |
| Unloading Rate | 30 bu/min |
| Header Widths | 13-15 ft |
| Fuel Capacity | 45 gallons |
| Weight | Approx. 8,000 lbs |
| Years Produced | 1971-1978 |
1055 Maintenance Tips
- Concave Adjustment: Regularly inspect and adjust the concave clearance to ensure proper threshing and minimize grain loss. Refer to the operator's manual for recommended settings based on crop type and condition.
- Belt and Chain Tension: Check and maintain proper tension on all belts and chains, particularly the cylinder belt and feeder house chain. Loose belts or chains can lead to slippage, reduced performance, and premature wear.
- Sieve and Chaffer Cleaning: Regularly clean the sieves and chaffer to remove debris and prevent blockages. This ensures proper grain cleaning and reduces losses.
- Bearing Greasing: Follow the lubrication schedule in the operator's manual to grease all bearings regularly. Proper lubrication is crucial for extending bearing life and preventing breakdowns.
1055 History & Background
The John Deere 1055 was introduced in 1971 as a mid-sized combine offering a balance of power and simplicity. There were no major design changes throughout its production run, highlighting its proven design. The 1055 represents a period in combine history where reliability and ease of maintenance were highly valued by farmers.
Frequently Asked Questions
Which fuel lift pump fits the John Deere 1055 combine?
The recommended fuel lift pump for the John Deere 1055 combine is the RE27667 - Pump, Fuel Lift Transfer.
What starter is compatible with the John Deere 1055 combine?
For the John Deere 1055 combine, we recommend the AR70436 - Starter, Bosch as a reliable replacement.
Which spin-on lube filter is recommended for the John Deere 1055 combine?
The recommended spin-on lube filter for the John Deere 1055 combine is the T19044 - Filter, Lube, Spin-on.
What are common replacement parts for the John Deere 1055 combine?
For maintaining the John Deere 1055 combine, commonly replaced parts include the AN102383 - Chain, Coupler, JD9449 - Bearing, Pilot: .669" I.D., Z699H - Tooth Ring; Slip Clutch, RE31617 - Seal, Valve, and AR48675 - Thermostat, 180°.

T26321 - Lower Bushing
SKU: T26321
69 in stock

RE27667 - Fuel Lift Transfer Pump
SKU: RE27667
2834 in stock

RE27348 - Connecting Rod (Std) Bearing
SKU: RE27348
1575 in stock

T20129 - Valve Stem Cap
SKU: T20129
155 in stock

T20077 - Valve Keeper
SKU: T20077
1248 in stock

T20073 - Camshaft Follower
SKU: T20073
131 in stock

RE52020 - Oil Pump Repair Kit
SKU: RE52020
23 in stock

RE38859 - Overhaul without Seals Gasket Set
SKU: RE38859
4 in stock

RE37503 - Pencil Injector
SKU: RE37503
101 in stock

RE35685 - Oil Pump
SKU: RE35685
141 in stock

RE31929 - Engine Oil Cooler
SKU: RE31929
27 in stock

RE31617 - Valve Seal
SKU: RE31617
322 in stock

RE27368 - Main (.030") Bearing
SKU: RE27368
10 in stock

RE27364 - Connecting Rod (.030") Bearing Set
SKU: RE27364
24 in stock

RE27360 - Main (.020") Bearing
SKU: RE27360
55 in stock

RE27358 - Connecting Rod (.020") Bearing Set
SKU: RE27358
193 in stock

RE27353 - Main (.010") Bearing
SKU: RE27353
105 in stock

RE27352 - Main (Std) Bearing
SKU: RE27352
105 in stock

RE27349 - Connecting Rod (.010") Bearing Set
SKU: RE27349
626 in stock

R82821 - Camshaft
SKU: R82821
6 in stock

AT27622 - Return Fuel Tee
SKU: AT27622
168 in stock

AH75397 - Cylinder End
SKU: AH75397
29 in stock

R66307 - Clamp
SKU: R66307
25 in stock

RE50784 - Major Engine Overhaul Kit
SKU: RE50784
Out of stock








