John Deere 4400 Combine Parts
Replacement parts for the John Deere 4400 Combine. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.
The John Deere 4400 combine, manufactured from 1972 to 1979, was a popular choice for farmers looking for a reliable and efficient grain harvesting solution. Powered by a John Deere diesel engine producing around 105 horsepower, the 4400 offered header widths up to 15 feet. Its conventional threshing system made it well-suited for a variety of crops, solidifying its reputation for dependable performance.
About the 4400
The John Deere 4400 combine was introduced in 1972 and remained in production until 1979, filling a crucial role in the John Deere combine lineup. It was powered by a 329 cubic inch John Deere diesel engine rated at approximately 105 horsepower. The 4400 utilized a conventional threshing system with a 43-inch wide cylinder, offering effective grain separation. Grain tank capacity was approximately 70 bushels, with an unloading auger capable of emptying the tank at a rate of around 25 bushels per minute. Available header widths ranged from 13 to 15 feet, allowing for efficient harvesting in various field conditions. Chopper and spreader options were available to manage crop residue. The cab featured basic controls and instrumentation to monitor combine performance. The John Deere 4400 excelled at harvesting wheat, soybeans, corn, and other small grains, establishing itself as a versatile and dependable machine for farmers.
4400 Specifications
| Engine | John Deere 105 HP 329 cu in Diesel |
|---|---|
| Separator Type | Conventional - 43-inch Cylinder |
| Grain Tank | 70 bushels |
| Unloading Rate | 25 bu/min |
| Header Widths | 13-15 ft |
| Fuel Capacity | 45 gallons |
| Weight | 12,500 lbs |
| Years Produced | 1972-1979 |
4400 Maintenance Tips
- Concave Adjustment: Regularly check and adjust the concave clearance to ensure proper threshing without damaging the grain. Consult the operator's manual for recommended settings based on the crop being harvested.
- Belt and Chain Tension: Inspect and adjust belt and chain tension throughout the harvesting season to prevent slippage and ensure efficient power transmission. Replace worn belts and chains promptly.
- Sieve and Chaffer Cleaning: Regularly clean the sieves and chaffer to remove debris and prevent grain loss. Adjust the sieve and chaffer openings according to the crop and field conditions.
- Bearing Greasing: Grease all bearings regularly according to the manufacturer's recommendations. Proper lubrication will extend the life of the bearings and prevent premature failure.
4400 History & Background
The John Deere 4400 combine was introduced in 1972 as a mid-sized combine option in the John Deere lineup. It did not undergo any major redesigns during its production run, focusing on refining existing features for improved reliability and performance. The 4400 played a significant role in providing farmers with an affordable and dependable combine for harvesting various grain crops.
Frequently Asked Questions
Which fuel injector is recommended for the John Deere 4400 combine?
The John Deere 4400 combine typically uses the AR89564 - Injector, Pencil for its fuel system. This is a common replacement part to maintain optimal engine performance.
What replacement bearing is used for the front shoe grain supply auger on the John Deere 4400?
For the front shoe grain supply auger on the John Deere 4400, the AH214862 - Bearing, Front Shoe Grain Supply Auger is a suitable replacement part.
What cylinder spike tooth is compatible with the John Deere 4400 separator?
The H132057 - Tooth, Cylinder Spike; w/ Hardware is an essential component for the cylinder on the John Deere 4400 combine's threshing system.
What are some common replacement parts for the John Deere 4400 combine?
Common replacement parts for the John Deere 4400 combine include the AR50041 - Filter, Diesel Fuel, H138762 - Belt, Secondary Countershaft / Front Straw Chopper, E76372 - Section, AH154697 - Bushing, Isolator (10 Per Pk), T20006 - Gasket, Exhaust Manifold, and Z699H - Tooth Ring; Slip Clutch. Regular maintenance ensures continued reliability.

VTK6481 - Valve Train Kit (Std)
SKU: VTK6481
5 in stock

T32343 - Cylinder Liner
SKU: T32343
21 in stock

T26321 - Lower Bushing
SKU: T26321
69 in stock

T20328 - Oil Filler Cap Gasket
SKU: T20328
48 in stock

RE38852 - Upper (329) Gasket Set
SKU: RE38852
65 in stock

RE27667 - Fuel Lift Transfer Pump
SKU: RE27667
2834 in stock

RE27348 - Connecting Rod (Std) Bearing
SKU: RE27348
1575 in stock

T20129 - Valve Stem Cap
SKU: T20129
155 in stock

T20094 - Crankshaft Gear
SKU: T20094
5 in stock

T20077 - Valve Keeper
SKU: T20077
1248 in stock

T20073 - Camshaft Follower
SKU: T20073
131 in stock

T20070 - Camshaft Gear
SKU: T20070
13 in stock

T20034 - Upper Bushing
SKU: T20034
21 in stock

T20006 - Exhaust Manifold Gasket
SKU: T20006
834 in stock

T19854 - O-ring
SKU: T19854
246 in stock

RE62240 - 12V Fuel Injection Pump Shutoff Solenoid
SKU: RE62240
33 in stock

RE524752 - Overhaul (With Seals) Gasket Set
SKU: RE524752
4 in stock

RE52020 - Oil Pump Repair Kit
SKU: RE52020
23 in stock

RE508317 - W/ Adjusting Screw Rocker Arm
SKU: RE508317
64 in stock

RE38859 - Overhaul without Seals Gasket Set
SKU: RE38859
4 in stock

RE35685 - Oil Pump
SKU: RE35685
141 in stock

RE32011 - Fuel Injection Nozzle Seal O-Ring Kit
SKU: RE32011
127 in stock

RE31929 - Engine Oil Cooler
SKU: RE31929
27 in stock

RE27368 - Main (.030") Bearing
SKU: RE27368
10 in stock








