John Deere 1052 Combine Parts
Replacement parts for the John Deere 1052 Combine. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.
The John Deere 1052 combine, produced from the early to mid-1970s, was a popular choice for farmers seeking a reliable and efficient grain harvesting solution. Equipped with a John Deere diesel engine producing around 105 HP, it offered header widths ranging from 13 to 20 feet. Its conventional separator design proved effective for harvesting a variety of crops, making it a staple in many fields.
About the 1052
The John Deere 1052 combine was a mainstay in American agriculture throughout the 1970s. Powered by a John Deere 404 cubic inch (6.6L) diesel engine producing approximately 105 horsepower, it provided ample power for its time. The 1052 utilized a conventional threshing system, employing a cylinder to separate grain from the plant material. Its grain tank had a capacity of around 85 bushels, and it featured an unloading auger capable of emptying the tank at a rate of approximately 50 bushels per minute. Available header widths ranged from 13 to 20 feet, accommodating various field sizes and crop types. While a chopper/spreader was not standard, aftermarket options were often added. The cab offered basic operator comfort, including a seat and basic controls. This combine excelled at harvesting wheat, soybeans, and corn in relatively clean conditions.
1052 Specifications
| Engine | John Deere 404D 105 HP 404 cu in (6.6L) Diesel |
|---|---|
| Separator Type | Conventional - 32 in Cylinder |
| Grain Tank | 85 bushels |
| Unloading Rate | 50 bu/min |
| Header Widths | 13-20 ft |
| Fuel Capacity | 35 gallons |
| Weight | 11,000 lbs |
| Years Produced | 1973-1977 (approximate) |
1052 Maintenance Tips
- Concave Adjustment: Regularly check and adjust concave clearance to optimize threshing performance and minimize grain damage. Refer to the operator's manual for recommended settings based on crop type.
- Belt and Chain Tension: Inspect all belts and chains for proper tension and wear. Loose belts and chains can cause slippage, reduced performance, and premature failure.
- Sieve and Chaffer Cleaning: Regularly clean the sieves and chaffer to remove debris and ensure proper separation. Clogged sieves reduce cleaning efficiency and increase grain loss.
- Bearing Greasing: Follow the recommended greasing schedule for all bearings to prevent premature wear and failure. Use high-quality grease suitable for agricultural applications.
1052 History & Background
The John Deere 1052 was introduced in the early 1970s, offering farmers a relatively compact and affordable combine option. While not a revolutionary design, its reliability and simplicity made it a popular choice for many years. It represents a significant era in combine harvester development before the widespread adoption of rotary threshing systems.
Frequently Asked Questions
Which fuel lift pump fits the John Deere 1052 combine?
The recommended fuel lift transfer pump for the John Deere 1052 combine is RE27667 - Pump, Fuel Lift Transfer.
What replacement air filter is available for the John Deere 1052 combine?
A suitable replacement air cleaner filter for the John Deere 1052 combine is AR36044 - Filter, Air Cleaner (Import).
What thermostat temperature is recommended for the John Deere 1052 combine?
For optimal engine temperature control in the John Deere 1052 combine, the RE501052 - THERMOSTAT, 182° is recommended.
What are common replacement parts for the John Deere 1052 combine?
Common wear parts for the John Deere 1052 combine include general engine components like the RE27348 - Bearing, Connecting Rod (Std) and AR65507 - Sealing Ring Kit, Liner, as well as combine-specific items such as the 411-042 - Black 12ga Top Serrated, and power train components like the Z699H - Tooth Ring; Slip Clutch. Other essential parts include the AR97708 - Pump, Water and the AL55046 - Starter Solenoid, New.

T20215 - Thermostat Housing (5 pack) Gasket
SKU: T20215
86 in stock

RE27667 - Fuel Lift Transfer Pump
SKU: RE27667
2834 in stock

RE27348 - Connecting Rod (Std) Bearing
SKU: RE27348
1575 in stock

RE52020 - Oil Pump Repair Kit
SKU: RE52020
23 in stock

RE35685 - Oil Pump
SKU: RE35685
141 in stock

RE27368 - Main (.030") Bearing
SKU: RE27368
10 in stock

RE27360 - Main (.020") Bearing
SKU: RE27360
55 in stock

RE27353 - Main (.010") Bearing
SKU: RE27353
105 in stock

RE27352 - Main (Std) Bearing
SKU: RE27352
105 in stock

RE27349 - Connecting Rod (.010") Bearing Set
SKU: RE27349
626 in stock

AH75397 - Cylinder End
SKU: AH75397
29 in stock

Z38186 - Feeder House Main Drive Belt
SKU: Z38186
4 in stock

RE54709 - Major Engine Overhaul Kit
SKU: RE54709
Out of stock

AT35123 - 37 DEG Elbow Fitting
SKU: AT35123
34 in stock

411-042 - Black 12ga Top Serrated
SKU: 411-042
330 in stock

34M7043 - Spring Pin
SKU: 34M7043
200 in stock

AR100056 - Control Valve
SKU: AR100056
Out of stock

RE25160 - Blower Motor
SKU: RE25160
Out of stock

RE24308 - Lo-Press. Switch
SKU: RE24308
25 in stock

AL39043 - Blower Motor Ass.
SKU: AL39043
1098 in stock

H91228 - Straw Spreader Gear
SKU: H91228
51 in stock

AH171588 - Set of 6 Straw Chopper Knife
SKU: AH171588
103 in stock

AP24354 - Flanged Idler Pulley
SKU: AP24354
24 in stock

AH21440 - Idler Sprocket
SKU: AH21440
26 in stock








