Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

John Deere 1085 Combine Parts

Browse John Deere 1085 Combine replacement parts. Everything from routine maintenance items to hard-to-find components.

The John Deere 1085 combine, produced from the late 1970s into the early 1980s, offered farmers a reliable and efficient harvesting solution. Typically equipped with a 135 horsepower engine and available with header widths ranging from 13 to 20 feet, this conventional separator combine became popular for its simplicity and durability in harvesting various grains. Its straightforward design made it a favorite for smaller to medium-sized farming operations.

About the 1085

The John Deere 1085 combine was a workhorse for many farmers, manufactured from approximately 1978 to 1983. It featured a John Deere 6466D, 135 horsepower, 466 cubic inch displacement diesel engine, providing ample power for its era. The 1085 utilized a conventional threshing system with a robust cylinder and straw walkers for effective grain separation. Grain tank capacity was approximately 125 bushels, with an unloading auger capable of discharging at roughly 35 bushels per minute. Available header widths ranged from 13 to 20 feet, catering to different field sizes and crop conditions. While a chopper or spreader was optional, many units were equipped to manage residue. The cab, while not as advanced as later models, offered basic controls and visibility. The John Deere 1085 performed well in harvesting wheat, soybeans, and corn, excelling in relatively clean fields with moderate yields. Its affordability and ease of maintenance contributed significantly to its popularity.

1085 Specifications

EngineJohn Deere 6466D 135 HP 466 CID Diesel
Separator TypeConventional - 43 inch wide cylinder
Grain Tank125 bushels
Unloading Rate35 bu/min
Header Widths13-20 ft
Fuel Capacity60 gallons
WeightApproximately 15,000 lbs
Years Produced1978-1983 (approximate)

1085 Maintenance Tips

  • Concave Adjustment: Regularly check and adjust concave clearance based on the crop being harvested to optimize threshing and minimize grain loss.
  • Belt and Chain Tension: Inspect all belts and chains for proper tension and wear. Loose or worn belts/chains can significantly reduce efficiency and cause damage.
  • Sieve and Chaffer Cleaning: Clean sieves and chaffers frequently to ensure proper airflow and separation. Clogged screens lead to increased grain loss over the back.
  • Bearing Greasing: Follow the manufacturer's lubrication schedule for all bearings to prevent premature wear and failure.

1085 History & Background

Introduced in the late 1970s, the John Deere 1085 was designed as a mid-sized combine offering a balance of performance and affordability. While it didn't undergo any major redesigns during its production run, it served as a reliable stepping stone between smaller, older models and the larger, more technologically advanced combines of the 1980s. The 1085 represents a pivotal era in combine harvester development.

Frequently Asked Questions

Which fuel lift pump is suitable for the John Deere 1085?

The RE27667 - Pump, Fuel Lift Transfer is a suitable replacement for the John Deere 1085.

What receiver drier is compatible with the John Deere 1085?

The RE49169 - Receiver Drier is a compatible part for the John Deere 1085.

Which oil filter is recommended for the John Deere 1085?

For routine maintenance, the T19044 - Filter, Lube, Spin-on is an excellent choice for the John Deere 1085.

What are common wear parts for the John Deere 1085?

Showing 1-24 of 173 products