Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

John Deere 1032 Combine Parts

Shop John Deere 1032 Combine parts. From filters and fluids to blades and belts, we carry the replacements you need to keep running.

The John Deere 1032 combine, produced from approximately 1974-1980, was a popular choice for farmers seeking a reliable and straightforward harvesting solution. Powered by a John Deere diesel engine offering around 105 HP, the 1032 was typically equipped with header widths ranging from 13 to 15 feet. Its conventional cylinder and concave system made it effective for harvesting a variety of grains, particularly wheat and soybeans.

About the 1032

The John Deere 1032 combine was a workhorse on many farms during its production run from approximately 1974 to 1980. It was designed to be a reliable and affordable option for smaller to medium-sized operations. Powering the 1032 was a John Deere 404 cubic inch diesel engine, generating approximately 105 horsepower. This provided sufficient power for its header and threshing capabilities. The 1032 used a conventional threshing system with a cylinder and concave. Grain tank capacity was around 70 bushels. Unloading rates were generally around 30-40 bushels per minute. Header widths offered typically ranged from 13 to 15 feet, offering flexibility for different field sizes. While chopper and spreader options existed, they weren't universally equipped, depending on the original purchaser's needs. The cab, while not as luxurious as later models, provided basic operator comfort and control. The John Deere 1032 proved particularly adept at harvesting wheat, soybeans, and other small grains.

1032 Specifications

EngineJohn Deere 404D 105 HP Diesel
Separator TypeConventional - 6-bar cylinder
Grain Tank70 bushels
Unloading Rate35 bu/min
Header Widths13-15 ft
Fuel Capacity35 gallons
WeightApprox. 12,000 lbs
Years Produced1974-1980

1032 Maintenance Tips

  • Concave Adjustment: Regularly check and adjust concave clearance according to the crop being harvested to optimize threshing and minimize grain loss.
  • Belt and Chain Tension: Inspect all belts and chains for wear and proper tension. Loose belts and chains can slip, reducing efficiency and leading to premature failure.
  • Sieve and Chaffer Cleaning: Clean the sieves and chaffer frequently to remove debris and ensure proper airflow for effective grain cleaning.
  • Bearing Greasing: Grease all bearings according to the manufacturer's recommendations to prevent overheating and extend bearing life.

1032 History & Background

The John Deere 1032 was introduced in the mid-1970s as a part of John Deere's 32 series combines, offering a cost-effective harvesting solution. It filled a gap in John Deere's lineup, providing a smaller, more accessible combine than its larger counterparts. While not revolutionary in design, it represented a reliable and durable option that contributed to John Deere's continued market dominance.

Frequently Asked Questions

Which water pump fits the John Deere 1032 combine?

The recommended water pump for the John Deere 1032 combine is AR97708 - Pump, Water.

What fuel lift pump is recommended for the John Deere 1032?

For the John Deere 1032, the recommended fuel lift transfer pump is RE27667 - Pump, Fuel Lift Transfer.

What type of tooth ring is used in the slip clutch of a John Deere 1032?

The John Deere 1032 combine uses the Z699H - Tooth Ring; Slip Clutch for its slip clutch mechanism.

What are common replacement parts for the John Deere 1032?

Showing 1-24 of 97 products