John Deere 1075 Combine Parts
Replacement parts for the John Deere 1075 Combine. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.
The John Deere 1075 combine, produced from the mid-1970s to early 1980s, was a popular choice for farmers looking for a reliable and efficient grain harvesting solution. Equipped with a John Deere diesel engine producing around 105 horsepower, it offered a range of header widths to suit various field sizes. Its conventional separator design provided effective threshing, making it a workhorse in its time.
About the 1075
The John Deere 1075 combine harvester was manufactured from approximately 1974 to 1984. It utilized a John Deere diesel engine, delivering approximately 105 horsepower from its displacement. The 1075 features a conventional threshing system, employing a cylinder and concave to separate grain from the plant material. The grain tank boasts a capacity of roughly 95 bushels, while the unloading auger can discharge grain at a rate of approximately 40 bushels per minute. Available header widths ranged from 13 to 18 feet, allowing for adaptability to different crop types and field conditions. While it came standard with a straw chopper to spread residue, the 1075 was typically seen harvesting wheat, soybeans, and corn with great success. The cab, though simple by today's standards, provided basic operator comfort and visibility. The 1075 was lauded for its ease of maintenance and reliable performance, contributing to its widespread adoption during its production run.
1075 Specifications
| Engine | John Deere 404 cu in (6.6 L) Diesel |
|---|---|
| Separator Type | Conventional - 39.5 inch cylinder |
| Grain Tank | 95 bushels |
| Unloading Rate | 40 bu/min |
| Header Widths | 13-18 ft |
| Fuel Capacity | 40 gallons |
| Weight | 9,400 lbs |
| Years Produced | 1974-1984 (Approximate) |
1075 Maintenance Tips
- Regularly inspect and adjust concave clearance to optimize threshing performance and minimize grain loss.
- Check and maintain proper tension on all belts and chains, replacing them as needed to prevent breakdowns during harvest.
- Clean sieves and chaffers frequently to ensure efficient grain separation and prevent overloading the cleaning system.
- Grease all bearings and lubrication points according to the manufacturer's recommendations to extend the life of components.
1075 History & Background
The John Deere 1075 was introduced in the mid-1970s as a reliable and affordable combine option for farmers. While it didn't undergo major redesigns during its production run, it solidified John Deere's position as a leading manufacturer of agricultural equipment. The 1075 represented a dependable, conventional combine design that met the needs of many grain farmers.
Frequently Asked Questions
Which pencil injector is recommended for the John Deere 1075?
For reliable fuel delivery, consider the AR89564 - Injector, Pencil, designed for optimal performance in your combine.
What fuel lift transfer pump fits the John Deere 1075?
The RE27667 - Pump, Fuel Lift Transfer is a suitable replacement for maintaining the fuel system efficiency of your combine.
Which cab air filter is best for the John Deere 1075?
For a clean cab environment, we recommend the AH92463 - Filter, Cab Air, ensuring fresh air while operating your combine.
What are some essential replacement parts for the John Deere 1075 combine?
Essential replacement parts for the 1075 combine include the Z699H - Tooth Ring; Slip Clutch, AN102383 - Chain, Coupler, T19044 - Filter, Lube, Spin-on, JD39103 - Bearing, RH, and the H91796 - Gear, Straw Spreader to keep your machine running smoothly.

RE27667 - Fuel Lift Transfer Pump
SKU: RE27667
2834 in stock

RE27348 - Connecting Rod (Std) Bearing
SKU: RE27348
1575 in stock

RE64292 - Injector O-Ring Kit
SKU: RE64292
1121 in stock

RE52020 - Oil Pump Repair Kit
SKU: RE52020
23 in stock

RE38859 - Overhaul without Seals Gasket Set
SKU: RE38859
4 in stock

RE37503 - Pencil Injector
SKU: RE37503
101 in stock

RE35685 - Oil Pump
SKU: RE35685
141 in stock

RE33115 - Piston Liner Kit
SKU: RE33115
94 in stock

RE27352 - Main (Std) Bearing
SKU: RE27352
105 in stock

RE27349 - Connecting Rod (.010") Bearing Set
SKU: RE27349
626 in stock

AT27622 - Return Fuel Tee
SKU: AT27622
168 in stock

R66307 - Clamp
SKU: R66307
25 in stock

Z38186 - Feeder House Main Drive Belt
SKU: Z38186
4 in stock

AT63170 - Sub To 804-1890
SKU: AT63170
41 in stock

RE50783 - Major Engine Overhaul Kit
SKU: RE50783
Out of stock

34M7043 - Spring Pin
SKU: 34M7043
200 in stock

AR100056 - Control Valve
SKU: AR100056
Out of stock

TY6766 - 6E171) 5.75" pulley Denso w/ Clutch (Ear mtd. Re-Mfg Compressor
SKU: TY6766
226 in stock

TY6626 - 6E171) 5.75" pulley Denso w/ Clutch (Ear mtd. Re-Mfg Compressor
SKU: TY6626
226 in stock

RE60697 - 12V) A6 Style w/ Clutch (1 groove 5.75" pulley New Compressor
SKU: RE60697
297 in stock

RE57936 - Compressor
SKU: RE57936
226 in stock

RE49169 - Receiver Drier
SKU: RE49169
1162 in stock

RE46657 - Denso Style w/ Clutch New Compressor
SKU: RE46657
29 in stock

RE25160 - Blower Motor
SKU: RE25160
Out of stock








