John Deere 1165 Combine Parts
Replacement parts for the John Deere 1165 Combine. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.
The John Deere 1165 Combine Harvester was a workhorse on many farms, built to deliver reliable grain harvesting. While exact production years are scarce, these combines were typically equipped with engines around 100-150 HP, and offered header widths suitable for medium-sized farms. Known for their conventional separation systems and robust design, the 1165 offered a reliable solution for harvesting wheat, soybeans, and corn.
About the 1165
The John Deere 1165 represents a pivotal era in combine technology, offering a dependable and efficient solution for farmers during its production years. Though exact production years are difficult to pinpoint, the 1165 was generally produced in the late 1970s and early to mid 1980s. These models were powered by John Deere diesel engines, typically in the 100-150 horsepower range, with displacements suited for demanding harvesting conditions. Featuring a conventional threshing system with a cylinder and concave, the 1165 effectively separated grain from the crop material. The grain tank capacity was approximately 80-120 bushels, depending on the specific configuration. Unloading auger speeds generally ranged from 40-60 bushels per minute, enabling swift grain transfer. Available header widths ranged from 13-18 feet, catering to a variety of field sizes. While specific chopper/spreader options varied, many 1165 models included a straw chopper to manage residue. The cab offered basic operator comforts with controls for adjusting header height, ground speed, and separator settings. The 1165 excelled in harvesting a range of crops including wheat, soybeans, and corn, making it a versatile asset for any grain farm.
1165 Specifications
| Engine | John Deere 100-150 HP Diesel |
|---|---|
| Separator Type | Conventional - Cylinder and Concave |
| Grain Tank | 80-120 bushels |
| Unloading Rate | 40-60 bu/min |
| Header Widths | 13-18 ft |
| Fuel Capacity | Unknown gallons |
| Weight | Unknown lbs |
| Years Produced | Late 1970s - Mid 1980s (Estimated) |
1165 Maintenance Tips
- Concave Adjustment: Regularly inspect and adjust the concave clearance according to the crop being harvested. Proper concave setting minimizes grain loss and damage.
- Belt and Chain Tension: Check and maintain proper tension on all belts and chains. Loose belts and chains can slip, causing reduced performance and premature wear.
- Sieve and Chaffer Cleaning: Clean the sieves and chaffer regularly to ensure proper air flow and efficient separation. Clogged sieves lead to grain loss and reduced harvest quality.
- Bearing Greasing: Lubricate all bearings according to the manufacturer's recommendations. Proper greasing prevents bearing failure and extends the life of critical components.
1165 History & Background
The John Deere 1165 entered the agricultural landscape during a period of increasing demand for efficient harvesting solutions. While not a groundbreaking model in terms of technological advancements, the 1165 represented a reliable and practical option for farmers seeking a cost-effective combine harvester. Its enduring popularity is a testament to its simple design and robust build quality.
Frequently Asked Questions
Which water pump fits the John Deere 1165 combine?
The recommended replacement water pump for the John Deere 1165 combine is RE500734 - Water Pump.
What engine oil filter is recommended for the John Deere 1165?
For optimal engine performance, the recommended engine oil filter for the John Deere 1165 combine is RE59754 - Filter, Engine Oil.
Which fuel/water separator filter is appropriate for the John Deere 1165?
A key component for maintaining fuel system health in the John Deere 1165 is the RE62419 - Filter, Separator, Fuel/Water.
What are essential maintenance and wear parts for the John Deere 1165 combine?
For routine maintenance and to replace common wear components on the John Deere 1165 combine, consider items such as the CQ31965 - Belt, Clean Grain Elevator Drive, RE65165 - Bearing, Main (Std), RE48786 - Injector, Pencil, AT22961 - THERMOSTAT-180, AR92893 - Seal, Rear Crankshaft W/ Wear Sleeve, and the R123543 - Gasket, Rocker Cover.

T20073 - Camshaft Follower
SKU: T20073
131 in stock

RE66085 - Upper Gasket Set
SKU: RE66085
8 in stock

RE65969 - Piston Liner Kit
SKU: RE65969
52 in stock

RE65912 - Thrust (.010") Bearing
SKU: RE65912
73 in stock

RE65911 - Main (.010") Bearing
SKU: RE65911
721 in stock

RE65909 - Connecting Rod (.010") Bearing
SKU: RE65909
79 in stock

RE65908 - Connecting Rod (Std) Bearing
SKU: RE65908
7182 in stock

RE65168 - Thrust (Std) Bearing
SKU: RE65168
627 in stock

RE65165 - Main (Std) Bearing
SKU: RE65165
6921 in stock

RE59810 - Front Crankshaft Seal
SKU: RE59810
61 in stock

RE56690 - 7 Plate Engine Oil Cooler
SKU: RE56690
Out of stock

RE55512 - Piston
SKU: RE55512
5 in stock

RE532841 - Upper Gasket Set
SKU: RE532841
19 in stock

RE516553 - Fuel Filter Seal Kit
SKU: RE516553
232 in stock

RE51650 - Sediment Bowl
SKU: RE51650
279 in stock

RE508317 - W/ Adjusting Screw Rocker Arm
SKU: RE508317
64 in stock

RE504914 - Engine Oil Pump
SKU: RE504914
62 in stock

RE50467 - Fuel Hand Primer
SKU: RE50467
717 in stock

RE501456 - Overhaul without Seals Gasket Set
SKU: RE501456
16 in stock

RE500608 - Fracture Type Connecting Rod
SKU: RE500608
Out of stock

RE500160 - SAE Thread Filter Head Assy
SKU: RE500160
82 in stock

RE500005 - Oil Fill Cap
SKU: RE500005
94 in stock

RE48786 - Pencil Injector
SKU: RE48786
41 in stock

RE40048 - Exhaust Clamp
SKU: RE40048
80 in stock








