Ford New Holland 3150 Tractor Parts
Shop Ford New Holland 3150 Tractor parts. From filters and fluids to blades and belts, we carry the replacements you need to keep running.
The Ford New Holland 3150 tractor, manufactured in the late 1970s and early 1980s, was a versatile workhorse for many farms. Typically powered by a diesel engine in the 50-55 horsepower range, its reliable engine and robust build made it a popular choice for various agricultural tasks. With a PTO horsepower rating suited for a range of implements, the 3150 offered farmers a cost-effective and dependable solution.
About the 3150
The Ford New Holland 3150 was produced from 1975 to 1981 (years may vary depending on source and market). It was commonly equipped with a Shibaura diesel engine. Engine options typically included models producing around 52 to 54 horsepower. The engine displacement was around 158 cubic inches. The 3150 primarily featured a gear-type transmission, offering a range of speeds, usually 8 forward and 2 reverse. PTO horsepower generally ranged from 46 to 48 HP, with a standard 540 RPM PTO. Hydraulic capacity typically reached around 8-10 gallons per minute, often supporting one or two remote valves. The tractor utilized a Category I or II 3-point hitch, enabling the use of various implements. The 3150 was well-suited for various farming applications, including hay baling, light tillage, livestock feeding operations, and general utility work. What set it apart was its simple design, ease of maintenance, and the reputation for reliability that Ford tractors had established.
3150 Specifications
| Engine | Shibaura 52 HP Diesel |
|---|---|
| PTO HP | 47 HP @ 540 RPM |
| Transmission | Gear, 8 Forward/2 Reverse |
| Hydraulics | 8 GPM, 1-2 remotes |
| 3-Point Hitch | Category I/II, 2500 lbs lift capacity |
| Fuel Capacity | 16 gallons |
| Weight | 5500 lbs |
| Years Produced | 1975-1981 |
3150 Maintenance Tips
- Check and change the engine oil and filter every 250 hours of operation, using a high-quality oil meeting Ford/New Holland specifications.
- Regularly inspect and clean the hydraulic fluid filter, and replace the hydraulic fluid every 500-1000 hours, depending on operating conditions, to prevent contamination and ensure smooth hydraulic operation.
- Keep the fuel system clean by using clean fuel, regularly draining the water separator, and replacing the fuel filter annually or as needed.
- Before storing the tractor for extended periods, fill the fuel tank to prevent condensation, change the engine oil, grease all fittings, and disconnect the battery.
3150 History & Background
The Ford New Holland 3150 was introduced in the mid-1970s as part of Ford's utility tractor lineup. It represented a solid, dependable machine aimed at smaller to medium-sized farms. While it did not undergo major redesigns during its production run, it remained a significant tractor in the Ford/New Holland agricultural history for its affordability and reliability.
Frequently Asked Questions
What fuel injector fits the Ford New Holland 3150?
For the Ford New Holland 3150, the 82845260 - Injector is a suitable replacement.
Which PTO shaft seal is recommended for the Ford New Holland 3150?
The D8NN703AA - Seal, PTO Shaft is a recommended replacement for your Ford New Holland 3150.
What replacement starter is suitable for the Ford New Holland 3150?
For the Ford New Holland 3150, the 83981923 - Starter, Lucas is a reliable option.
What are common replacement parts for the Ford New Holland 3150?
Common replacement parts for the Ford New Holland 3150 include the 83937061 - Filter, Fuel, EDPN3K758A - Filter, Power Steering, NDA7580B - Bearing, Release (sealed), 6108 - Clutch Pilot Bearing, E9NN8255AA - Gasket; Thermostat, and the 86531999 - Seal, Outer Rear Axle.

VPD8500 - Fuel Injector Seal Kit
SKU: VPD8500
272 in stock

SD756 - Cylinder (Semi-Finished) Liner
SKU: SD756
61 in stock

SD753 - Cylinder (Semi-Finished) Liner
SKU: SD753
28 in stock

RK165-20 - Piston with Rings (.020")
SKU: RK165-20
1 in stock

RK159 - Piston with Rings (Std)
SKU: RK159
7 in stock

RK156-30 - Piston with Rings (.030")
SKU: RK156-30
2 in stock

RK156-20 - Piston with Rings (.020")
SKU: RK156-20
9 in stock

RK156 - Piston with Rings (Std)
SKU: RK156
23 in stock

C7NN3010F - Front Axle Assembly w/ Bushing
SKU: C7NN3010F
45 in stock

C5NN3A319A - Drag Link (LH) Tube
SKU: C5NN3A319A
17 in stock

C5NN3A300B - Front Drag Link End
SKU: C5NN3A300B
180 in stock

C5NN3349A - Drag Link Tube
SKU: C5NN3349A
76 in stock

C5NN3308E - Rear (LH) Drag Link End
SKU: C5NN3308E
78 in stock

C5NN3307G - Rear (RH) Drag Link End
SKU: C5NN3307G
97 in stock

957E3307B - Rear Drag Link End
SKU: 957E3307B
82 in stock

957E3290B - Front Drag Link End
SKU: 957E3290B
19 in stock

36725 - Outer Cup
SKU: 36725
330 in stock

9N703B - PTO Seal (Double Lip)
SKU: 9N703B
Out of stock

LM67048-P - Tapered Roller Bearing Cone
SKU: LM67048-P
715 in stock

LM67048-I - Tapered Roller Bearing Cone
SKU: LM67048-I
457 in stock

LM67010-P - Tapered Bearing Cup
SKU: LM67010-P
907 in stock

LM67010-I - Tapered Bearing Cup
SKU: LM67010-I
1029 in stock

LM603049-P - Tapered Roller Bearing Cone
SKU: LM603049-P
156 in stock

LM603049-I - Tapered Roller Bearing Cone
SKU: LM603049-I
336 in stock








