Mtd Cub Cadet White E993I Snow Blower Thrower Parts
The Mtd Cub Cadet White E993i is a popular two-stage gas-powered snow blower, likely manufactured in the late 1990s and early 2000s. Known for its reliability and robust snow-clearing capability, it typically features a clearing width around 26-28 inches, making it a good choice for homeowners and light commercial use in areas with moderate to heavy snowfall. This model gained popularity due to its combination of power, ease of use, and durability.
The Mtd Cub Cadet White E993i is a two-stage snow blower designed for residential and light commercial use. Production likely spanned from the late 1990s to early 2000s, though precise dates can vary. The E993i typically features a Tecumseh engine, often a 8-10 HP model, with an optional electric start for convenient starting in cold weather. Its two-stage design incorporates a robust auger that breaks up the snow and an impeller that throws it through the discharge chute. Commonly, this model offered a clearing width of 26-28 inches and an intake height of around 20-21 inches, allowing it to handle substantial snowfalls. Depending on snow conditions, throwing distances of up to 30-40 feet were possible. The E993i typically featured a wheel-drive system with multiple forward and reverse speeds, providing good traction and maneuverability. The chute control was generally a manual crank or lever system. A headlight may be included to aid with snow removal during early morning or evening hours. Heated grips were not a standard feature on all E993i models. The E993i excels in dealing with moderate to heavy snow accumulations on driveways, sidewalks, and other paved surfaces.
Specifications
| Engine | Tecumseh 8-10 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-28 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 4-6 Forward / 1-2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Late 1990s - Early 2000s (Estimated) |
Maintenance Tips
- Auger and Impeller Inspection: Regularly inspect the auger blades and impeller for damage, wear, and looseness. Replace worn or damaged parts promptly to maintain optimal performance.
- Shear Pin Replacement: Keep spare shear pins on hand. Replace any broken shear pins immediately to protect the auger gearbox from damage. Use only the correct shear pins specified for your model.
- Fuel System Maintenance: Use fuel stabilizer during off-season storage to prevent fuel deterioration and carburetor problems. Drain the fuel tank and run the engine until it stalls before long periods of inactivity.
- Oil Changes: Perform regular oil changes according to the manufacturer's recommendations (usually every 25-50 hours of operation). Use the correct oil type and viscosity.
- Skid Shoe Adjustment: Adjust the skid shoes to maintain proper clearance between the scraper blade and the ground. This prevents damage to the scraper blade and ensures efficient snow removal on various surfaces.
History & Background
The Mtd Cub Cadet White E993i was likely introduced in the late 1990s or early 2000s as a mid-range two-stage snow blower. While there were likely minor updates during its production run, significant redesigns were uncommon. The E993i represents a popular segment of snow blowers, providing a balance between clearing power and affordability for homeowners and light commercial applications.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White E993i?
The E993i typically uses a Tecumseh engine, ranging from 8 to 10 horsepower. Electric start was often offered as an option.
What is the clearing width of the E993i?
The Mtd Cub Cadet White E993i usually has a clearing width between 26 and 28 inches, with an intake height of approximately 20-21 inches.
Is the E993i a single-stage or two-stage snow blower?
The E993i is a two-stage snow blower. It uses an auger to collect and break up the snow, and an impeller to forcefully throw the snow through the discharge chute. This two-stage design allows it to handle heavier and deeper snow compared to single-stage models.
What are common parts needed for the E993i?
Common replacement parts for the E993i include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, fuel filters, and engine oil.
