Mtd Cub Cadet White 310-180-027 Snow Blower Thrower Parts
Find parts for your Mtd Cub Cadet White 310-180-027 Snow Blower Thrower. We stock OEM and quality aftermarket replacements ready to ship.
The Mtd Cub Cadet White 310-180-027 snow blower, manufactured primarily in the late 1990s and early 2000s, quickly became a favorite for homeowners needing a reliable gas-powered snow removal solution. This model, a robust two-stage unit, offered a substantial clearing width making quick work of driveways and walkways during winter storms. Its straightforward design and durable construction contributed to its lasting popularity.
About the 310-180-027
The Mtd Cub Cadet White 310-180-027 series of snow blowers were designed to provide homeowners with a powerful and dependable snow removal option. Production spanned from the late 1990s through the early 2000s. These units typically featured a Tecumseh engine, ranging from 8 to 10 horsepower, with options for electric start on some models for easier cold-weather starts. As a two-stage snow blower, the 310-180-027 employs an auger to break up the snow and then an impeller to forcefully discharge it. The clearing width is usually around 26 to 28 inches, with an intake height of approximately 20 to 21 inches, allowing it to handle moderate to heavy snowfall. These blowers can throw snow up to 30-40 feet, depending on snow conditions. The drive system is typically a wheel drive with multiple forward and reverse speeds. Chute controls are generally manual, allowing users to adjust the direction and distance of the snow discharge. While not always standard, some models included headlights for enhanced visibility during early morning or evening snow removal. The Mtd Cub Cadet White 310-180-027 is well-suited for residential use in areas with moderate to heavy snowfall, offering a good balance of power, maneuverability, and reliability.
310-180-027 Specifications
| Engine | Tecumseh 8-10 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-28 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Unknown gallons |
| Weight | Unknown lbs |
| Years Produced | Late 1990s - Early 2000s |
310-180-027 Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for any signs of wear, damage, or bending. Replace worn or damaged parts promptly to maintain optimal performance.
- Check and Replace Shear Pins: Shear pins protect the auger and gearbox from damage caused by hard objects. Inspect them regularly and replace them immediately if broken or sheared. Use only the correct shear pins specified by the manufacturer.
- Use Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and ensure easy starting next winter.
- Adjust Skid Shoes: Adjust the skid shoes according to the surface you're clearing. Raise them for gravel or uneven surfaces to prevent damage to the blower and lower them for paved surfaces for a cleaner snow removal.
310-180-027 History & Background
The Mtd Cub Cadet White 310-180-027 snow blower was introduced as a mid-range option within the Cub Cadet and White Outdoor product lines, providing homeowners with a reliable two-stage snow removal solution. While there weren't any significant redesigns during its production run, minor improvements were likely made to components. This model played a significant role in providing a more affordable and accessible snow removal option for many homeowners.
Frequently Asked Questions
Which auger shaft bearing fits the Mtd Cub Cadet White 310-180-027?
The B1RS46 - Bearing, Ball is a suitable replacement for the auger shaft on the Mtd Cub Cadet White 310-180-027 snow blower.
What bearing is used on the drive axle for the Mtd Cub Cadet White 310-180-027?
For the drive axle, the B1AC61 - Bearing, Ball is recommended for the Mtd Cub Cadet White 310-180-027 model.
Which impeller shaft bearing fits the Mtd Cub Cadet White 310-180-027?
The B1SB7210 - Ball Bearing is an ideal replacement for the impeller shaft bearing on your Mtd Cub Cadet White 310-180-027 snow blower.
What are common parts needed for the 310-180-027?
Common wear parts for the Mtd Cub Cadet White 310-180-027 include bearings like the B1RS46 - Bearing, Ball, the B1AC61 - Bearing, Ball, and the B1SB7210 - Ball Bearing.











