Mtd Cub Cadet White 11530PC-COLUMBIA Snow Blower Thrower Parts
The MTD/Cub Cadet/White 11530pc Columbia snow thrower, likely manufactured in the late 1990s and early 2000s, is a gas-powered, two-stage snow blower known for its reliable performance. Featuring a 30-inch clearing width, it was a popular choice for homeowners needing to clear larger driveways and walkways due to its power and ease of use.
The MTD/Cub Cadet/White 11530pc Columbia series represents a range of two-stage snow blowers designed for residential snow removal. Production years likely span the late 1990s and early 2000s. These models typically featured a Tecumseh engine, often in the 11-11.5 HP range, with some variations offering an electric start option for added convenience. The two-stage design utilizes a robust auger to break up the snow and then an impeller to throw it away from the cleared area. The 30-inch clearing width and approximately 21-inch intake height allow for efficient snow removal, even with moderate accumulation. Throwing distances can reach up to 40 feet depending on snow conditions. The drive system is wheel-driven with multiple forward and reverse speeds, providing good maneuverability. Chute controls are typically manual, allowing the operator to adjust the direction and deflection of the snow stream. Many models include a headlight for improved visibility in low-light conditions. The 11530pc Columbia is well-suited for homeowners and property managers dealing with moderate to heavy snowfall on medium to large driveways and walkways. They perform best in dry to moderately wet snow conditions.
Specifications
| Engine | Tecumseh 11-11.5 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 30 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward / 2 Reverse |
| Fuel Tank | 5 Gallons |
| Weight | 275 Lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Regularly inspect the auger and impeller for damage or wear. Replace worn auger paddles and impellers to maintain optimal performance.
- Check and replace shear pins as needed. Shear pins protect the auger gearbox from damage if the auger encounters a hard object. Use only the correct shear pins specified by the manufacturer.
- Inspect belt tension and replace worn or damaged belts. Proper belt tension ensures efficient power transfer from the engine to the auger and drive system.
- Change the engine oil at recommended intervals. Refer to the owner's manual for the correct oil type and change frequency. Use fuel stabilizer during off-season storage.
- Adjust skid shoes to suit the surface you're clearing. Raise the skid shoes for gravel surfaces and lower them for paved surfaces. This prevents damage to both the snow blower and the surface.
History & Background
The MTD/Cub Cadet/White 11530pc Columbia snow blower was introduced as a mid-range, two-stage model designed to offer a balance of power and maneuverability for homeowners. It provided a wider clearing width compared to smaller single-stage models, making it a popular choice for those with larger driveways. While specific redesigns are not documented, minor improvements and feature additions were likely incorporated throughout its production run.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 11530pc Columbia?
The Mtd Cub Cadet White 11530pc Columbia typically uses a Tecumseh engine, usually in the 11 to 11.5 horsepower range. Some models may feature an electric start option.
What is the clearing width of the 11530pc Columbia?
The Mtd Cub Cadet White 11530pc Columbia has a clearing width of 30 inches and an intake height of approximately 21 inches.
Is the 11530pc Columbia a single-stage or two-stage snow blower?
The 11530pc Columbia is a two-stage snow blower. This means it uses an auger to collect and break up the snow, and then an impeller to throw the snow away from the cleared area. This design allows it to handle heavier and deeper snowfalls compared to single-stage models.
What are common parts needed for the 11530pc Columbia?
Common parts needed for the 11530pc Columbia include shear pins, belts (auger and drive belts), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
