Mtd Cub Cadet White 180-095 Snow Blower Thrower Parts
Replacement parts for the Mtd Cub Cadet White 180-095 Snow Blower Thrower. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.
The MTD Cub Cadet White 180-095 series snow throwers were workhorse models, likely manufactured from the late 1990s through the early 2000s. These gas-powered snow blowers, often featuring a two-stage design, were popular for their robust construction and ability to handle moderate to heavy snowfalls. With clearing widths typically around 26-28 inches, they provided a good balance of power and maneuverability for residential and small commercial snow removal.
About the 180-095
The MTD Cub Cadet White 180-095 snow blower series represents a line of dependable machines designed for tackling significant snow accumulation. Production likely spanned the late 1990s and early 2000s, targeting homeowners and property managers seeking reliable snow removal. These machines typically featured a Tecumseh or Briggs & Stratton engine, ranging from 8 to 10 HP. Electric start options were common, providing convenient starting in cold conditions. The two-stage design incorporates a robust auger system to break up snow and an impeller to throw it a considerable distance. Clearing widths ranged from approximately 26 to 28 inches, with intake heights around 20-21 inches. This allowed the 180-095 to effectively clear moderate to heavy snowfalls. Throwing distances could reach up to 30-40 feet, depending on snow conditions. These models utilized a wheel drive system, offering multiple forward and reverse speeds for optimal control. Chute rotation was typically manual, and many models featured a headlight for improved visibility during nighttime operation. The 180-095 series was well-suited for driveways, walkways, and small parking areas experiencing average to above-average snow accumulation.
180-095 Specifications
| Engine | Tecumseh or Briggs & Stratton 8-10 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-28 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 5-6 Forward / 2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Late 1990s - Early 2000s |
180-095 Maintenance Tips
- Regularly inspect the auger and impeller for wear and damage. Replace worn or damaged components promptly to maintain optimal performance.
- Check shear pins frequently and replace them as needed. Use only the correct shear pins specified for your model to prevent damage to the auger and gearbox.
- Ensure proper belt tension for the auger and drive system. Loose belts can lead to slippage and reduced performance. Adjust or replace belts as necessary.
- Change the engine oil according to the manufacturer's recommendations. Use the correct oil type and viscosity for optimal engine lubrication and longevity.
- Use fuel stabilizer in the off-season to prevent fuel degradation. This helps prevent starting problems when you need your snow blower next winter.
- Adjust the skid shoes to match the surface you are clearing. Proper adjustment prevents damage to the snow blower and the surface being cleared.
180-095 History & Background
The MTD Cub Cadet White 180-095 snow blower was introduced to provide a mid-range option for consumers needing more power than a single-stage but not requiring the largest commercial models. While specific redesign information is limited, MTD regularly made incremental improvements to their snow blower lines. This series represented a reliable and popular choice for homeowners and smaller commercial operations during its production run.
Frequently Asked Questions
Which ball bearing is recommended for the auger shaft on the MTD Cub Cadet White 180-095?
For optimal performance, the B1RS46 - Bearing, Ball is a direct replacement for many applications on the MTD Cub Cadet White 180-095, including the auger shaft.
What replacement ball bearing is suitable for the drive axle on the 180-095?
The B1AC61 - Bearing, Ball is a high-quality replacement bearing that fits various positions, including the drive axle, on the MTD Cub Cadet White 180-095.
Which ball bearing should be used for the impeller shaft on the MTD Cub Cadet White 180-095?
For reliable operation of your impeller system, the B1SB7210 - Ball Bearing is an excellent choice for the MTD Cub Cadet White 180-095.
What are the common ball bearings that need replacement on the MTD Cub Cadet White 180-095?
Regular maintenance often includes replacing ball bearings. For your MTD Cub Cadet White 180-095, commonly replaced bearings include the B1RS46 - Bearing, Ball, B1AC61 - Bearing, Ball, and the B1SB7210 - Ball Bearing.











