Mtd Cub Cadet White 2X-31AM63SR710 Snow Blower Thrower Parts
The MTD Cub Cadet White 2x 31AM63SR710 is a two-stage gas-powered snow thrower known for its reliability in tackling moderate to heavy snowfall. With a clearing width of around 26 inches, this model, likely manufactured in the mid-2000s, offered a good balance of power and maneuverability for homeowners and property managers. Its two-stage design efficiently breaks down snow and throws it a considerable distance.
The MTD Cub Cadet White 2x 31AM63SR710 snow thrower was a popular choice for homeowners seeking a dependable machine for clearing driveways and walkways. Production years are estimated to be around the mid-2000s. This model typically features a gas-powered engine, often a Powermore or similar brand, with a horsepower rating in the 5-7 HP range (approximately 179-208cc), and an electric start option was often available. Being a two-stage snow blower, it employs an auger system to break up the snow and an impeller to throw it out of the chute. The clearing width is approximately 26 inches, with an intake height of around 21 inches, allowing it to handle moderate snow depths. Expect a throwing distance of up to 30-35 feet, depending on snow conditions. The drive system is wheel-based, with multiple forward and reverse speeds for enhanced control. Chute controls are typically manual, allowing the operator to adjust the direction and angle of the snow stream. Some models may include a headlight for improved visibility during nighttime operation. While heated grips were not a standard feature on this model, its overall design and performance made it well-suited for residential snow removal in areas with average snowfall.
Specifications
| Engine | Powermore 208cc Electric Start Y |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 0.8 gallons |
| Weight | 200 lbs |
| Years Produced | Mid-2000s |
Maintenance Tips
- Regularly inspect the auger and impeller for damage or wear. Replace worn paddles on the auger and ensure the impeller is free of obstructions.
- Check shear pins frequently and replace them immediately if broken. Use only the correct shear pins specified for your model.
- Inspect belts for cracks, fraying, or slippage. Adjust belt tension as needed to ensure proper operation. Consider replacing belts every few seasons to maintain optimal performance.
- Change the engine oil at the beginning of each snow season and use fuel stabilizer during off-season storage to prevent fuel system issues.
History & Background
The MTD Cub Cadet White 2x 31AM63SR710 was part of a line of reliable two-stage snow blowers offered by MTD under different brand names. It represented a popular option for homeowners needing a step up from single-stage models. While specific updates and redesigns are difficult to pinpoint without exact documentation, it served as a solid mid-range offering within the broader MTD snow blower lineup.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 2x 31am63sr710?
The MTD Cub Cadet White 2x 31am63sr710 typically uses a Powermore 208cc gas engine. An electric start option was often included for easier starting in cold weather.
What is the clearing width of the 2x 31am63sr710?
The MTD Cub Cadet White 2x 31am63sr710 has a clearing width of 26 inches and an intake height of 21 inches.
Is the 2x 31am63sr710 a single-stage or two-stage snow blower?
The MTD Cub Cadet White 2x 31am63sr710 is a two-stage snow blower. It uses an auger to collect and break up the snow, and an impeller to then throw the snow out of the discharge chute.
What are common parts needed for the 2x 31am63sr710?
Common wear parts for the MTD Cub Cadet White 2x 31am63sr710 include shear pins, belts (auger and drive), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters. Regular maintenance and timely replacement of these parts will help ensure optimal performance.
