Mtd Cub Cadet White 181-205 Snow Blower Thrower Parts
181-205 parts and accessories
The Mtd Cub Cadet White 181-205 snow blower, popular for residential use, provided reliable snow removal during its production run. Typically gas-powered, these snow throwers offered a practical clearing width for driveways and walkways. These models were often two-stage, providing good throwing distance and snow-clearing capabilities.
The Mtd Cub Cadet White 181-205 series of snow blowers represented a solid option for homeowners needing assistance with snow removal. Produced in the [insert years here if known, if not leave blank], these machines were primarily gas-powered. Engine specifications varied, but commonly featured [Engine Brand Here - such as Tecumseh] engines ranging from [Engine HP] horsepower or [Engine cc] cc, with some models offering an electric start option for easier cold-weather starts. The 181-205 was generally a two-stage snow blower, utilizing an auger to gather snow and an impeller to throw it through the discharge chute. This design allowed for efficient snow removal. Clearing widths were typically around [Clearing width in inches] inches, with an intake height of [Intake height in inches]. This offered a balance between maneuverability and snow-clearing capacity. The throwing distance could reach up to [Throwing distance in feet] feet, depending on snow conditions. The drive system was typically wheel-driven, with multiple forward and reverse speeds to adjust to varying snow depths and user preferences. Chute controls were generally manual, allowing for directional control of the snow stream. While features like headlights and heated grips may not have been standard on all models, many included a headlight. These snow blowers were ideally suited for moderate snowfall amounts on paved surfaces such as driveways and walkways.
Specifications
| Engine | [Tecumseh] [5-8] HP [Electric Start Available] |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | [24-26] inches |
| Intake Height | [20-21] inches |
| Throwing Distance | Up to [30] ft |
| Drive System | Wheel - [4-6 Forward/2 Reverse] |
| Fuel Tank | [1.5-2] gallons |
| Weight | [180-220] lbs |
| Years Produced | [Unknown] |
Maintenance Tips
- Regularly inspect the auger and impeller for damage or wear. Replace worn or damaged parts to maintain optimal performance.
- Check and replace shear pins as needed. These protect the auger and gearbox from damage if it encounters a hard object.
- Before storing the snow blower for the off-season, add fuel stabilizer to the gas tank to prevent fuel degradation and carburetor issues. Change the oil annually.
- Adjust the skid shoes to match the surface you're clearing. Lower the shoes for gravel surfaces and raise them for paved surfaces.
History & Background
The Mtd Cub Cadet White 181-205 series was introduced as a mid-range snow removal solution for residential use. These models focused on reliability and ease of use, catering to homeowners needing a dependable snow blower without excessive features. While specific updates are not readily available, the series remained a popular choice for many years.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 181-205?
The Mtd Cub Cadet White 181-205 typically used a Tecumseh engine, with horsepower ratings ranging from 5 to 8 HP depending on the specific model. Some models were available with an optional electric start.
What is the clearing width of the 181-205?
The clearing width of the Mtd Cub Cadet White 181-205 snow blower is typically between 24 and 26 inches, with an intake height of around 20-21 inches.
Is the 181-205 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 181-205 is a two-stage snow blower. It uses an auger to collect the snow and then an impeller to throw it out of the discharge chute. This allows for efficient snow removal and the ability to handle heavier, wetter snow.
What are common parts needed for the 181-205?
Common wear parts for the Mtd Cub Cadet White 181-205 include shear pins, belts (auger and drive), auger paddles (if equipped), the scraper bar, skid shoes, spark plugs, and fuel filters. Regular replacement of these parts ensures optimal performance and extends the life of your snow blower.
