Mtd Cub Cadet White 310-180-031 Snow Blower Thrower Parts
310-180-031 parts and accessories
The Mtd Cub Cadet White 310-180-031 snow blower was a popular choice for homeowners and light-duty commercial use, likely manufactured in the late 1990s and early 2000s. Powered by a gas engine, these snow throwers typically featured a two-stage design and a comfortable clearing width for handling moderate snowfall. Its reliability and ease of use contributed to its popularity during its production run.
The Mtd Cub Cadet White 310-180-031 snow blower is a recognizable machine known for its practicality in tackling residential and light commercial snow removal. While exact production years vary, it was most prevalent in the late 90s and early 2000s. These models usually came equipped with a Briggs & Stratton or Tecumseh gas engine, ranging from 5 to 8 horsepower. Electric start was often an available option, adding to user convenience. The 310-180-031 is a two-stage snow blower, employing an auger to break up the snow and an impeller to throw it. The clearing width generally ranges from 24 to 26 inches, with an intake height around 20-21 inches. This allows it to handle moderate snowfalls effectively. Throwing distances can reach up to 30-35 feet, depending on snow conditions. The drive system is typically wheel-driven, offering multiple forward and reverse speeds for maneuverability. Chute control is usually manual, with a crank or lever to adjust the direction of snow discharge. Many models also featured a headlight for improved visibility during nighttime operation. Although heated grips were not standard, they were sometimes available as an aftermarket add-on. The 310-180-031 is best suited for paved driveways, sidewalks, and other relatively smooth surfaces, efficiently clearing moderate snow accumulations.
Specifications
| Engine | Briggs & Stratton/Tecumseh 5-8 HP Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Unknown gallons |
| Weight | Unknown lbs |
| Years Produced | Late 1990s-Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for any signs of wear, damage, or bending. Replace any damaged components immediately to maintain optimal performance.
- Shear Pin Replacement: Always keep a supply of replacement shear pins on hand. Replace broken shear pins immediately to protect the auger and gearbox from damage if an object gets lodged in the auger.
- Fuel Stabilization: Before storing the snow blower for the off-season, add fuel stabilizer to the gas tank to prevent fuel degradation and carburetor issues. This will ensure a smooth start when winter returns.
History & Background
The Mtd Cub Cadet White 310-180-031 snow blower was a popular model during its time, offering a balance of power and affordability. While specific details on its introduction are limited, it represented a reliable option in the two-stage snow blower market, catering to homeowners needing a dependable machine for winter snow removal.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 310-180-031?
The Mtd Cub Cadet White 310-180-031 snow blower typically uses a Briggs & Stratton or Tecumseh engine, ranging from 5 to 8 horsepower. Electric start was often an available option.
What is the clearing width of the 310-180-031?
The clearing width of the Mtd Cub Cadet White 310-180-031 snow blower is generally between 24 and 26 inches, with an intake height of around 20-21 inches.
Is the 310-180-031 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 310-180-031 is a two-stage snow blower. It uses an auger to collect and break up the snow, then an impeller throws the snow out of the discharge chute.
What are common parts needed for the 310-180-031?
Common replacement parts for the Mtd Cub Cadet White 310-180-031 include shear pins, belts (auger and drive), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
