Mtd Cub Cadet White 180-352 Snow Blower Thrower Parts
Browse Mtd Cub Cadet White 180-352 Snow Blower Thrower replacement parts. Everything from routine maintenance items to hard-to-find components.
The Mtd Cub Cadet White 180-352 snow blower, typically manufactured in the late 1980s and early 1990s, is a gas-powered two-stage model known for its reliability and ability to handle moderate to heavy snowfall. With a clearing width around 26 inches, this snow thrower offered a balance of power and maneuverability, making it a popular choice for homeowners and smaller commercial properties.
About the 180-352
The Mtd Cub Cadet White 180-352 is a two-stage snow blower designed for both residential and light commercial use. Produced primarily in the late 1980s and early 1990s, this model was a mainstay of the Mtd, Cub Cadet, and White Outdoor product lines. It's typically powered by a Tecumseh engine, ranging from 8 to 10 HP. Most models feature an electric start option for easier starting in cold conditions. As a two-stage unit, it employs an auger to break up the snow and an impeller to throw it. The serrated steel auger efficiently chews through packed snow and ice. This unit offers a clearing width of 26 inches and an intake height of approximately 21 inches, enabling it to handle substantial snow depths. Depending on conditions, it can throw snow up to 30-40 feet. The drive system utilizes wheels with multiple forward and reverse speeds, offering good traction. Chute rotation is typically manual, allowing for directional control of the thrown snow. A headlight provides improved visibility during early morning or evening snow removal. While heated grips were not standard, they may have been available as aftermarket add-ons. The 180-352 is ideal for areas that experience moderate to heavy snowfall on driveways, sidewalks, and smaller parking lots.
180-352 Specifications
| Engine | Tecumseh 8-10 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Approx. 1.5 gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Late 1980s - Early 1990s |
180-352 Maintenance Tips
- Regularly inspect the auger and impeller for damage or wear. Replace worn auger paddles and ensure the impeller spins freely.
- Check and replace shear pins as needed. These protect the auger gearbox from damage if it encounters a hard object.
- Maintain proper belt tension for optimal performance. Slipping belts reduce throwing distance and can cause premature wear.
- Change the engine oil annually, or more frequently with heavy use, using the recommended oil type and viscosity.
180-352 History & Background
The Mtd Cub Cadet White 180-352 snow blower was introduced as a reliable and capable mid-size option in Mtd's lineup. While specific redesigns were minimal during its production run, it represented a solid design that balanced power and maneuverability. Its significance lies in its widespread use and reputation for dependable performance during its production era.
Frequently Asked Questions
Which bearing is a replacement for original part number GX20818 on the Mtd Cub Cadet White 180-352?
The B1RS46 - Bearing, Ball is a direct replacement for original part number GX20818, commonly found in the auger or drive shaft assemblies of the 180-352 snow blower.
What ball bearing fits the auger drive system for the Mtd Cub Cadet White 180-352?
For the auger drive system of the 180-352, the B1AC61 - Bearing, Ball is an appropriate replacement. It is also an equivalent to part number A-JD9358.
Which ball bearing is used in the impeller assembly of the Mtd Cub Cadet White 180-352?
The B1SB7210 - Ball Bearing is a suitable replacement for the impeller assembly bearing on the 180-352 model, and cross-references with GX21510.
What are some common replacement bearings for the Mtd Cub Cadet White 180-352 snow blower?
Key replacement bearings for the 180-352 include the B1RS46 - Bearing, Ball, the B1AC61 - Bearing, Ball, and the B1SB7210 - Ball Bearing. These are essential for maintaining smooth operation of rotating components.











