Mtd Cub Cadet White 2X-31BM53TR709 Snow Blower Thrower Parts
The MTD Cub Cadet White 2X 31BM53TR709 is a two-stage gas-powered snow blower known for its reliable performance in moderate to heavy snowfall. Primarily manufactured in the 2010s, this model boasts a clearing width suitable for medium to large driveways and walkways. Its robust engine and two-stage design made it a popular choice for homeowners seeking a balance between power and maneuverability.
The MTD Cub Cadet White 2X 31BM53TR709 was a popular two-stage snow blower model produced by MTD under the Cub Cadet and White Outdoor brands, primarily in the 2010s. These machines were designed to handle moderate to heavy snowfall effectively. Typically, these models were equipped with a Powermore engine, often around 208cc or 243cc, providing ample power for snow removal. Many came standard with an electric start, allowing for easy starting in cold weather conditions. The 2X designation indicates a two-stage system, where the auger breaks up the snow and feeds it into a high-speed impeller that throws the snow. The clearing width typically ranged from 24 to 26 inches, with an intake height around 20-21 inches, enabling it to handle deeper snowdrifts. The throwing distance varied but could reach up to 30-40 feet depending on snow conditions. These models generally featured a wheel drive system with multiple forward and reverse speeds, offering good traction and control. The chute rotation could be manual or remote, depending on the specific trim level. Some models also included a headlight for improved visibility during nighttime operation. These snow blowers are ideal for homeowners with medium to large driveways and those who experience regular snowfall throughout the winter season.
Specifications
| Engine | Powermore 208cc or 243cc Electric Start (Option) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | Unknown gallons |
| Weight | Unknown lbs |
| Years Produced | 2010s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace damaged parts promptly to maintain optimal performance.
- Shear Pins: Always have extra shear pins on hand. Replace broken shear pins immediately to prevent damage to the auger gearbox.
- Oil Changes: Change the engine oil at least once per season, or more frequently depending on usage. Use the oil type recommended by the manufacturer.
- Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
History & Background
The MTD Cub Cadet White 2X 31BM53TR709 was introduced as part of MTD's line of two-stage snow blowers designed for residential use. It was a popular model within the Cub Cadet and White Outdoor lineups, offering a balance of power, features, and value. While there weren't major redesigns during its production run, minor improvements and feature updates may have been implemented over the years.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 2x 31bm53tr709?
The Mtd Cub Cadet White 2x 31bm53tr709 typically uses a Powermore engine, either a 208cc or 243cc model. Some versions also feature an electric start option for easier starting in cold weather.
What is the clearing width of the 2x 31bm53tr709?
The Mtd Cub Cadet White 2x 31bm53tr709 typically has a clearing width between 24 and 26 inches, and an intake height of approximately 20-21 inches.
Is the 2x 31bm53tr709 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 2x 31bm53tr709 is a two-stage snow blower. This means it uses an auger to break up the snow and then an impeller to throw the snow out of the chute. This two-stage design allows it to handle deeper and heavier snow compared to single-stage models.
What are common parts needed for the 2x 31bm53tr709?
Common parts needed for the Mtd Cub Cadet White 2x 31bm53tr709 include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. These are wear items that may need replacement over time to keep the snow blower running smoothly.
