Mtd Cub Cadet White E762F Snow Blower Thrower Parts
The Mtd Cub Cadet White E762f snow blower, manufactured from the late 1990s through the early 2000s, was a popular gas-powered two-stage snow thrower known for its reliability in handling moderate to heavy snowfall. Its 26-inch clearing width made it ideal for homeowners needing to clear driveways and walkways. The robust design and readily available parts contributed to its enduring popularity.
The Mtd Cub Cadet White E762f is a two-stage snow blower designed for residential and light commercial use. Production spanned from the late 1990s to the early 2000s. It typically featured a Tecumseh engine, offering around 6 to 7 horsepower, with some models having optional electric start. This model employed a two-stage system: a serrated auger to break up snow and ice, and an impeller to throw the snow out of the discharge chute. The E762f has a 26-inch clearing width and an intake height around 20-21 inches, enabling it to handle substantial snow depths. Throwing distance was typically up to 30-40 feet, depending on snow conditions. The drive system is wheel-driven, typically offering 5-6 forward speeds and 2 reverse speeds for good maneuverability. Chute rotation is manually controlled, often with a crank handle. A headlight provides improved visibility in low-light conditions. While heated grips were not standard, they could sometimes be found as aftermarket additions or on upgraded models. The E762f is best suited for paved or unpaved surfaces with moderate to heavy snow accumulation.
Specifications
| Engine | Tecumseh 6-7 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | Unknown gallons |
| Weight | ~200 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect the Auger and Impeller: Regularly check for wear and damage, replacing worn paddles or auger blades as needed to maintain optimal snow throwing performance.
- Replace Shear Pins Promptly: Always use the correct shear pins (specified in your owner's manual) and replace them immediately if broken to prevent damage to the auger and gearbox.
- Perform Regular Oil Changes: Change the engine oil at least once per season, or more frequently with heavy use, to ensure proper lubrication and extend engine life.
- Use Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
History & Background
The Mtd Cub Cadet White E762f was introduced as a mid-range snow blower offering a balance of power and maneuverability. It was part of a broader line of snow removal equipment offered by MTD under the Cub Cadet and White Outdoor brands. This model remained relatively consistent throughout its production run, solidifying its reputation as a reliable and affordable option for homeowners.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White E762f?
The Mtd Cub Cadet White E762f typically features a Tecumseh engine, ranging from 6 to 7 horsepower. Some models were equipped with an optional electric start feature.
What is the clearing width of the E762f?
The Mtd Cub Cadet White E762f has a clearing width of 26 inches and an intake height of approximately 21 inches.
Is the E762f a single-stage or two-stage snow blower?
The E762f is a two-stage snow blower. It utilizes a serrated auger to break up the snow and ice, followed by an impeller that throws the snow through the discharge chute.
What are common parts needed for the E762f?
Common wear parts for the E762f include shear pins, belts (auger and drive), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
