Mtd Cub Cadet White E753F Snow Blower Thrower Parts
The MTD Cub Cadet White E753f snow blower, manufactured in the early 2000s, is a gas-powered, two-stage machine known for its reliable performance in residential snow removal. With a clearing width of around 26 inches, it effectively handles moderate to heavy snowfall. Its combination of power and maneuverability made it a popular choice for homeowners looking for a dependable snow-clearing solution.
The MTD Cub Cadet White E753f snow blower was a popular model offered in the early 2000s, designed for residential use. It's typically powered by a Tecumseh or Briggs & Stratton engine, often ranging from 8-10 HP with an electric start option for easier cold-weather starts. As a two-stage snow blower, it utilizes an auger system to break up snow and then an impeller to throw it away from the cleared area. The E753f features a clearing width of approximately 26 inches and an intake height of around 20-21 inches, enabling it to tackle substantial snowfalls. Depending on the engine and impeller design, it can throw snow up to 30-40 feet. The drive system is typically wheel-driven with multiple forward and reverse speeds, providing good traction and control. Chute controls are usually manual, allowing the operator to adjust the direction and angle of the snow discharge. Many models also include a headlight for improved visibility in low-light conditions. While not typically equipped with heated grips, the E753f is well-suited for handling moderate to heavy snow conditions on driveways, walkways, and smaller properties.
Specifications
| Engine | Tecumseh 8 HP Electric Start |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | 200 lbs |
| Years Produced | Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace any worn or damaged parts to maintain optimal performance.
- Replace Shear Pins: Keep spare shear pins on hand and replace them immediately if they break to protect the auger gearbox from damage.
- Change Engine Oil: Perform regular oil changes according to the manufacturer's recommendations to ensure smooth engine operation. Use a fuel stabilizer if you're not going to use it for more than 30 days.
- Adjust Skid Shoes: Adjust the skid shoes to the appropriate height for your surface to prevent damage to the snow blower and the ground.
History & Background
The MTD Cub Cadet White E753f was introduced as a mid-range two-stage snow blower, providing a balance of power and maneuverability for homeowners. It gained popularity as a reliable and cost-effective option for tackling moderate to heavy snowfall. While there weren't major redesigns during its production run, it remained a consistent performer in the snow blower market.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White E753f?
The MTD Cub Cadet White E753f typically features a Tecumseh or Briggs & Stratton engine, often around 8 HP. Many models include an electric start option for easier starting in cold weather.
What is the clearing width of the E753f?
The MTD Cub Cadet White E753f has a clearing width of approximately 26 inches and an intake height of around 21 inches.
Is the E753f a single-stage or two-stage snow blower?
The MTD Cub Cadet White E753f is a two-stage snow blower. It uses an auger to gather the snow and then an impeller to throw it out of the chute.
What are common parts needed for the E753f?
Common parts needed for the E753f include shear pins, belts (auger and drive belts), auger paddles/blades, scraper bar, skid shoes, spark plugs, and fuel filters.
