Mtd Cub Cadet White E661E Snow Blower Thrower Parts
The MTD, Cub Cadet, and White E661e snow blowers were popular models known for their reliability and ease of use in residential snow removal. Typically manufactured in the late 1990s and early 2000s, these gas-powered, two-stage snow blowers often featured a 26-inch clearing width, making them ideal for moderate to heavy snowfall on driveways and walkways. Their combination of power and maneuverability made them a favorite among homeowners.
The MTD/Cub Cadet/White E661e series snow blowers were a mainstay in the late 1990s and early 2000s, offering a balance of power and affordability. These models were typically equipped with a Tecumseh Snow King engine, ranging from 5 to 6 horsepower, although exact specifications could vary. An electric start option was often available for added convenience. As a two-stage snow blower, the E661e utilized an auger to break up the snow and an impeller to throw it, allowing for efficient clearing of heavier snow. The clearing width was typically 26 inches, with an intake height of around 20 inches. Throwing distance was generally advertised up to 30-35 feet, depending on snow conditions. The drive system was wheel-driven, offering multiple forward and reverse speeds. Chute controls were typically manual, allowing users to adjust the direction and angle of the snow discharge. While not always standard, some models featured a headlight for improved visibility during nighttime operation. These snow blowers were ideally suited for homeowners dealing with moderate to heavy snowfall on driveways, sidewalks, and patios. They provided a good combination of power, clearing width, and ease of use.
Specifications
| Engine | Tecumseh Snow King 5-6 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 180 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear or damage. Replace worn parts to maintain optimal performance.
- Check and Replace Shear Pins: Shear pins are designed to break and protect the auger gearbox. Always have spare shear pins on hand and replace them immediately if broken.
- Use Fuel Stabilizer: Add fuel stabilizer to the fuel tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
- Adjust Skid Shoes: Adjust the skid shoes to protect the scraper bar and prevent damage to your driveway or sidewalk surface.
History & Background
The MTD/Cub Cadet/White E661e series of snow blowers were introduced to provide homeowners with a reliable and affordable option for snow removal. These models, while sharing similar designs and components across the MTD, Cub Cadet, and White brands, allowed for wider market reach. They remained popular for several years due to their consistent performance and ease of maintenance.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White E661e?
The Mtd Cub Cadet White E661e snow blower typically uses a Tecumseh Snow King engine with horsepower ranging from 5 to 6 HP. Some models may feature an optional electric start.
What is the clearing width of the E661e?
The clearing width of the E661e is typically 26 inches, and the intake height is around 20 inches.
Is the E661e a single-stage or two-stage snow blower?
The E661e is a two-stage snow blower. This means it uses an auger to collect and break up the snow, then an impeller to throw the snow out of the chute.
What are common parts needed for the E661e?
Common replacement parts for the E661e include shear pins, belts (auger and drive), auger paddles (if applicable), scraper bar, skid shoes, spark plugs, and fuel filters.
