Mtd Cub Cadet White E643F Snow Blower Thrower Parts
The Mtd Cub Cadet White E643f snow blower, likely manufactured in the early 2000s, was a popular gas-powered two-stage model known for its reliability in tackling moderate to heavy snowfall. Typically featuring a clearing width around 24 inches, this snow thrower provided a good balance of power and maneuverability for residential snow removal. Its two-stage design allowed it to efficiently clear snow and throw it a considerable distance.
The Mtd Cub Cadet White E643f snow blower was part of a line of residential snow removal equipment designed for durability and ease of use. Production years likely spanned from the late 1990s to the early 2000s, although exact dates can vary. The engine was typically a Tecumseh or Briggs & Stratton gas engine, around 5-6 HP (approximately 179cc-205cc), with some models offering an electric start option for easier starting in cold weather. As a two-stage snow blower, it employed an auger system to break up the snow and then an impeller to throw the snow through the chute. The clearing width was generally around 24 inches, with an intake height of approximately 20 inches, allowing it to handle moderate snow depths. It could throw snow up to 30-40 feet, depending on snow conditions. The drive system was wheel-driven with multiple forward and reverse speeds, offering good traction and control. The chute rotation was typically manual, controlled by a crank or lever. While not always included, some versions may have offered a headlight for improved visibility during nighttime operation. The E643f was ideally suited for homeowners dealing with moderate to heavy snowfall on driveways, sidewalks, and patios.
Specifications
| Engine | Tecumseh or Briggs & Stratton 5-6 HP (179cc-205cc) Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 4-6 Forward/2 Reverse |
| Fuel Tank | Approximately 1.5 gallons |
| Weight | Approximately 150 lbs |
| Years Produced | Late 1990s - Early 2000s (Estimated) |
Maintenance Tips
- Inspect the auger and impeller regularly for damage or wear. Replace worn paddles or damaged auger flights to maintain optimal performance.
- Always use the correct shear pins. Using incorrect or hardened pins can damage the gearbox. Keep extra shear pins on hand.
- Check belt tension periodically. Loose belts can slip, reducing power and throwing distance. Adjust or replace belts as needed.
- Use fuel stabilizer during off-season storage. This prevents fuel breakdown and carburetor issues. Change the oil annually for optimal engine health.
History & Background
The Mtd Cub Cadet White E643f was a popular model during its production run, offering a reliable and affordable option for homeowners. It represented a common configuration for two-stage snow blowers of that era. There were no major redesigns during its production life, but minor improvements to the engine and controls may have occurred.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White E643f?
The E643f typically used a Tecumseh or Briggs & Stratton gas engine, ranging from 5 to 6 horsepower (approximately 179cc-205cc). Some models offered an electric start option.
What is the clearing width of the E643f?
The clearing width of the Mtd Cub Cadet White E643f is typically 24 inches, and the intake height is around 20 inches.
Is the E643f a single-stage or two-stage snow blower?
The E643f is a two-stage snow blower. It uses an auger to gather and break up the snow, then an impeller to throw the snow out of the chute. This two-stage design allows it to handle deeper and heavier snow than single-stage models.
What are common parts needed for the E643f?
Common parts needed for the E643f include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, fuel filters, and engine oil. Regular maintenance and replacement of these parts will ensure optimal performance and longevity.
