Mtd Cub Cadet White CA328-31AH57K8897 Snow Blower Thrower Parts
The MTD Cub Cadet White CA328 (model 31AH57K8897) is a gas-powered, two-stage snow thrower known for its reliable performance in residential snow removal. While the exact years of production require further research, this model likely falls within the late 1990s to early 2000s. Its combination of a powerful engine and a practical clearing width made it a popular choice for homeowners needing to clear driveways and walkways.
The MTD Cub Cadet White CA328 (model 31AH57K8897) is a two-stage snow thrower designed for efficient snow removal in residential settings. While specific production years are not readily available without further investigation, the model likely existed during the late 1990s and early 2000s. It typically features a Tecumseh or Briggs & Stratton engine, ranging from 5 to 8 HP, providing ample power for most snow conditions. An electric start option may have been available for enhanced convenience. The two-stage design incorporates an auger to break up the snow and an impeller to discharge it through the chute. The clearing width is typically around 26-28 inches with an intake height of approximately 20-21 inches, enabling it to handle moderate snowfall. Throwing distance can reach up to 30-40 feet, depending on snow consistency. The drive system usually features a wheel-driven system with multiple forward and reverse speeds for optimal control. Chute rotation is typically manual, and a headlight might have been included for improved visibility during early morning or evening snow removal. While heated grips aren't a standard feature for this era, the CA328 is well-suited for clearing paved surfaces in areas with moderate to heavy snowfall.
Specifications
| Engine | Tecumseh or Briggs & Stratton 5-8 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-28 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | Varies (Consult Manual) gallons |
| Weight | Approximately 200-250 Lbs |
| Years Produced | Late 1990s - Early 2000s (Estimate) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for any signs of wear, damage, or bending. Replace worn or damaged parts to maintain optimal performance.
- Shear Pin Replacement: Keep a supply of shear pins on hand. Replace shear pins immediately if they break to prevent damage to the auger gearbox. Use only the correct type and size of shear pins specified for your model.
- Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season. This will prevent fuel degradation and ensure easy starting next winter.
History & Background
The MTD Cub Cadet White CA328 was introduced as a reliable and practical two-stage snow blower for residential use. It aimed to provide a balance of power, clearing capacity, and ease of use for homeowners dealing with moderate to heavy snowfall. As a popular model of its time, it represented a competitive offering in the snow removal equipment market.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White Ca328 31ah57k8897?
The MTD Cub Cadet White CA328 (31AH57K8897) typically uses either a Tecumseh or Briggs & Stratton engine with horsepower ranging from 5 to 8 HP. Some models may have an optional electric start feature.
What is the clearing width of the Ca328 31ah57k8897?
The clearing width of the MTD Cub Cadet White CA328 (31AH57K8897) is typically between 26 and 28 inches, and the intake height is around 20-21 inches.
Is the Ca328 31ah57k8897 a single-stage or two-stage snow blower?
The MTD Cub Cadet White CA328 (31AH57K8897) is a two-stage snow blower. It uses an auger to collect and break up the snow, then an impeller to throw the snow out through the discharge chute.
What are common parts needed for the Ca328 31ah57k8897?
Common parts needed for the MTD Cub Cadet White CA328 (31AH57K8897) include shear pins, belts (auger and drive belts), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters. Regular replacement of these parts helps maintain optimal performance.
