Mtd Cub Cadet White 980-AUGER Snow Blower Thrower Parts
The Mtd Cub Cadet White 980 Auger snow blower, likely manufactured in the late 1990s and early 2000s, was a popular gas-powered machine known for its robust performance. Typically a two-stage snow blower, it boasted a significant clearing width for efficient snow removal. Its reliable engine and sturdy construction made it a favorite among homeowners and snow removal professionals alike.
The Mtd Cub Cadet White 980 Auger series was designed for both residential and light commercial use, providing a dependable solution for tackling moderate to heavy snowfall. While specific production years can vary, models were most likely available from the late 1990s through the early 2000s. These units commonly featured a Tecumseh or Briggs & Stratton engine, ranging from 8 HP to 10 HP, with some models offering electric start for easier cold-weather starts. As a two-stage snow blower, the 980 Auger utilizes a robust auger system to break up snow and ice, feeding it into a high-speed impeller that throws the snow a considerable distance. Clearing widths typically range from 26 to 30 inches, with an intake height of around 20-23 inches, allowing it to handle substantial snowdrifts. Expect throwing distances of up to 30-40 feet, depending on snow conditions and engine power. These models commonly use a wheel drive system with multiple forward and reverse speeds, providing good traction and maneuverability. Chute controls are usually manual, allowing users to adjust the direction and angle of the snow stream. Many included a headlight for improved visibility in low-light conditions. The 980 Auger is best suited for paved driveways, sidewalks, and larger areas where significant snow accumulation is common.
Specifications
| Engine | Tecumseh/Briggs & Stratton 8-10 HP Electric Start Option Available |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-30 inches |
| Intake Height | 20-23 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 5-6 Forward/2 Reverse |
| Fuel Tank | 1.5-2 gallons |
| Weight | 200-250 lbs |
| Years Produced | Late 1990s - Early 2000s (estimated) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or obstructions. Replace worn or damaged parts promptly.
- Check Shear Pins: Ensure shear pins are in good condition and properly installed. Carry spare shear pins to replace broken ones if the auger encounters a hard object.
- Change Engine Oil: Follow the manufacturer's recommendations for oil changes, typically once per season or after a specific number of hours of use. Use the correct oil type and viscosity.
- Use Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
History & Background
The Mtd Cub Cadet White 980 Auger models were introduced as a mid-range option within the Cub Cadet and White Outdoor snow blower lineups. Offering a balance of power and maneuverability, these two-stage machines filled a crucial need for homeowners and light commercial users seeking reliable snow removal capabilities. They helped solidify Mtd's position in the snow blower market by providing a dependable and well-performing product.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 980 Auger?
The Mtd Cub Cadet White 980 Auger typically features a Tecumseh or Briggs & Stratton engine, ranging from 8 HP to 10 HP. Some models are equipped with an electric start option for easier starting in cold weather.
What is the clearing width of the 980 Auger?
The clearing width of the Mtd Cub Cadet White 980 Auger is typically between 26 and 30 inches, with an intake height of approximately 20-23 inches.
Is the 980 Auger a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 980 Auger is a two-stage snow blower. It uses an auger to gather snow and then an impeller to throw the snow out of the chute. This two-stage design makes it suitable for handling deeper snow and throwing it further.
What are common parts needed for the 980 Auger?
Common wear parts for the Mtd Cub Cadet White 980 Auger include shear pins, belts (auger belt and drive belt), auger paddles/blades, scraper bar, skid shoes, spark plugs, and fuel filters. Regular inspection and replacement of these parts can help ensure optimal performance.
