Mtd Cub Cadet White 840-050 Snow Blower Thrower Parts
Mtd Cub Cadet White 840-050 Snow Blower Thrower parts in stock. Quality OEM and aftermarket replacement parts with fast shipping and competitive prices.
The Mtd Cub Cadet White 840-050 snow thrower, primarily gas-powered, was a popular choice for residential and light commercial use. While exact years of manufacture vary, this model typically featured a clearing width suitable for mid-sized driveways. It's known for its robust two-stage design, offering a good balance of power and maneuverability for moderate snowfall.
About the 840-050
The Mtd Cub Cadet White 840-050 series represents a range of snow throwers built for reliability and efficiency. Production years vary depending on the specific sub-model, but many were available throughout the late 1990s and early 2000s. These models commonly employed Tecumseh or Briggs & Stratton engines, ranging from 5 HP to 8 HP, with some models offering an electric start option for easier cold-weather starts. The two-stage design incorporates a robust auger system to break up snow and an impeller to throw it a considerable distance. Typical clearing widths range from 24 to 26 inches, with an intake height of around 20 inches. Throwing distances could reach up to 30 feet, depending on snow conditions. Drive systems typically consist of a wheel drive with multiple forward and reverse speeds, offering enhanced control. Chute controls are typically manual, allowing users to adjust the direction and deflection of the snow stream. Some models included a headlight for improved visibility during early morning or late evening snow removal. The 840-050 series is well-suited for homeowners dealing with moderate snowfall on paved surfaces and driveways.
840-050 Specifications
| Engine | Tecumseh/Briggs & Stratton 5-8 HP Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - 4-6 Forward/2 Reverse |
| Fuel Tank | 1-1.5 gallons |
| Weight | Approximately 180-220 lbs |
| Years Produced | Late 1990s - Early 2000s (Varies by sub-model) |
840-050 Maintenance Tips
- Inspect the auger and impeller regularly for damage: Look for bends, cracks, or excessive wear. Replace worn or damaged parts immediately to maintain optimal performance.
- Replace shear pins as needed: Shear pins protect the auger gearbox from damage if it encounters a hard object. Keep a supply of replacement shear pins on hand and replace them promptly when broken.
- Check and adjust belt tension: Proper belt tension is crucial for efficient power transfer. Refer to the owner's manual for instructions on how to check and adjust the belt tension.
- Use fuel stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and carburetor problems.
840-050 History & Background
The Mtd Cub Cadet White 840-050 snow thrower series was a staple for many homeowners needing a reliable machine. These models were popular due to their durable construction and ability to handle typical winter snowfalls. While specific redesigns were incremental, the core two-stage design remained consistent throughout its production run.
Frequently Asked Questions
Which fan drive belt is recommended for the Mtd Cub Cadet White 840-050?
The recommended fan drive belt for the 840-050 model is 7540194 - Belt, Fan Drive.
What drive belt fits the Mtd Cub Cadet White 840-050 snow blower?
The correct drive belt for the 840-050 is 7540131 - Belt, Drive.
Is part number 9540131 still available for the 840-050?
Part number 9540131 - SUBS TO 7540131 has been superseded by 7540131 - Belt, Drive, which is available for the 840-050.
What are the common replacement belts for the 840-050?
Common replacement belts for the Mtd Cub Cadet White 840-050 include the 7540131 - Belt, Drive and the 7540194 - Belt, Fan Drive. If you were looking for part number 9540131 - SUBS TO 7540131, it has been superseded by 7540131 - Belt, Drive.











