Mtd Cub Cadet White 840 Snow Blower Thrower Parts
840 parts and accessories
The MTD/Cub Cadet/White 840 series snow blowers, likely produced in the late 1990s and early 2000s, were popular gas-powered, two-stage machines known for their robust construction and reliable performance. These units typically featured a 24-26 inch clearing width, making them suitable for medium-sized driveways and walkways. Their two-stage design efficiently handles moderate to heavy snowfall, making them a favorite among homeowners.
The MTD, Cub Cadet, and White 840 series snow blowers represent a line of dependable snow removal equipment designed for residential use. These models were likely produced in the late 1990s and early 2000s. Engine specifications vary slightly depending on the specific sub-model, but they typically feature a Tecumseh or Briggs & Stratton gas engine ranging from 5 to 8 horsepower. Some models offered an optional electric start for added convenience. The 840 is a two-stage snow blower. The auger system consists of a serrated steel auger that breaks up snow and ice, feeding it back to a high-speed impeller. This impeller then throws the snow through the discharge chute. Clearing widths generally ranged from 24 to 26 inches, with an intake height of approximately 20-21 inches. Throwing distances could reach up to 30-35 feet depending on snow conditions. The drive system uses wheels with multiple forward and reverse speeds, offering good traction on various surfaces. Chute controls are typically manual, allowing the operator to adjust the direction and deflection of the snow stream. Many 840 models came standard with a headlight for improved visibility during nighttime or early morning snow removal. While heated grips were not a standard feature, they could have been aftermarket options. The 840 is ideally suited for clearing paved driveways and walkways in areas with moderate to heavy snowfall.
Specifications
| Engine | Tecumseh or Briggs & Stratton 5-8 HP - Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | Varies by submodel - ~1.5 gallons |
| Weight | ~180-220 lbs |
| Years Produced | Late 1990s - Early 2000s (Approximate) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace worn or damaged parts to maintain optimal snow-clearing performance.
- Shear Pins: Always use the correct shear pins recommended by the manufacturer. Keep spare shear pins on hand, as they are designed to break to protect the auger gearbox from damage when encountering hard objects.
- Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season. This will prevent fuel degradation and ensure easy starting when the snow returns.
- Skid Shoe Adjustment: Adjust the skid shoes according to the surface you're clearing. Raise the shoes for gravel driveways to prevent damage and lower them for paved surfaces for a cleaner scrape.
History & Background
The MTD/Cub Cadet/White 840 series was part of a broader line of snow blowers manufactured by MTD under various brand names. While specific introduction dates and redesigns are difficult to pinpoint without exact sub-model numbers, the 840 filled a niche for a reliable and affordable two-stage snow blower suitable for residential use, contributing to MTD's market share in the snow removal equipment industry.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 840?
The MTD Cub Cadet White 840 typically uses a Tecumseh or Briggs & Stratton engine, ranging from 5 to 8 horsepower. Electric start was an optional feature on some models.
What is the clearing width of the 840?
The MTD Cub Cadet White 840 generally has a clearing width of 24 to 26 inches and an intake height of approximately 20-21 inches.
Is the 840 a single-stage or two-stage snow blower?
The MTD Cub Cadet White 840 is a two-stage snow blower. It uses an auger to break up the snow and then an impeller to throw it out of the chute.
What are common parts needed for the 840?
Common parts needed for the MTD Cub Cadet White 840 include shear pins, drive belts, auger belts, auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
