Mtd Cub Cadet White 823 Snow Blower Thrower Parts
The Mtd Cub Cadet White 823 snow thrower, likely manufactured in the late 1990s and early 2000s, was a popular gas-powered, two-stage snow blower known for its reliable performance in residential settings. Featuring a 23-inch clearing width and a robust auger system, it efficiently tackled moderate snowfall on driveways and sidewalks. Its ease of use and durable construction contributed to its widespread appeal among homeowners.
The Mtd Cub Cadet White 823 series of snow throwers were a common sight in suburban driveways during the late 90s and early 2000s. These gas-powered, two-stage snow blowers were designed to handle moderate to heavy snowfall. While engine specifics could vary slightly depending on the exact year of manufacture, most models featured a Tecumseh engine, typically ranging from 8 to 10 HP. Many models also included an electric start option for easier cold-weather starting. The two-stage design employs a robust auger to break up the snow and then an impeller to throw it away from the clearing path. The 823 models boasted a 23-inch clearing width and an intake height capable of handling drifts up to around 20 inches. Depending on snow conditions, the throwing distance could reach up to 30-40 feet. These snow blowers typically used a wheel drive system with multiple forward and reverse speeds allowing for variable control. Chute controls were generally manual, allowing the operator to adjust the direction and deflection of the snow stream. Often equipped with a headlight for improved visibility in low-light conditions, the 823 was suitable for homeowners and property managers needing to clear driveways, sidewalks, and walkways in areas with moderate to heavy snowfall.
Specifications
| Engine | Tecumseh 8-10 HP (varies by year) Electric Start (optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 23 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Approximately 1.5 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect the Auger and Impeller: Regularly check the auger blades and impeller for any signs of wear, damage, or bending. Replace any damaged parts to ensure optimal snow removal performance.
- Check and Replace Shear Pins: Shear pins are designed to break if the auger encounters a hard object, preventing damage to the snow blower. Regularly inspect and replace any broken shear pins with the correct type and size.
- Use Fuel Stabilizer: Add fuel stabilizer to the fuel tank before storing the snow blower for the off-season. This will prevent fuel from degrading and causing starting problems the following winter.
- Adjust Skid Shoes: Adjust the skid shoes according to the surface you're clearing (paved, gravel, etc.). Proper adjustment prevents damage to both the snow blower and the surface.
History & Background
The Mtd Cub Cadet White 823 snow blower was a popular model produced during the late 1990s and early 2000s. It represented a solid mid-range option for homeowners needing a reliable two-stage snow blower. While there weren't major redesigns during its production run, minor improvements were likely incorporated over the years.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 823?
The Mtd Cub Cadet White 823 typically uses a Tecumseh engine, with horsepower ranging from 8 to 10 HP depending on the specific model year. An electric start option was available on some models.
What is the clearing width of the 823?
The Mtd Cub Cadet White 823 has a clearing width of 23 inches and an intake height of approximately 20 inches.
Is the 823 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 823 is a two-stage snow blower. It utilizes an auger to gather and break up the snow, and then an impeller to throw the snow out of the chute.
What are common parts needed for the 823?
Common replacement parts for the Mtd Cub Cadet White 823 include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters.
