Mtd Cub Cadet White 613 Snow Blower Thrower Parts
613 parts and accessories
The Mtd Cub Cadet White 613 snow thrower was a popular choice for homeowners during its production run. Typically featuring a gas-powered engine and a clearing width suitable for mid-sized driveways, this two-stage machine offered reliable performance. Its popularity stemmed from its combination of power and maneuverability, making snow removal a less daunting task for residential users.
The Mtd Cub Cadet White 613 series of snow throwers was a solid and dependable machine manufactured primarily for residential snow removal. While specific production years may vary, they generally fall within the late 1990s and early 2000s. These machines were commonly powered by a Briggs & Stratton or Tecumseh gas engine, ranging from 5 to 7 horsepower, with some models offering an electric start option for added convenience. As a two-stage snow blower, the 613 utilizes a robust auger system to break up the snow and then an impeller to throw it away from the clearing path. The clearing width typically ranged from 24 to 26 inches, with an intake height of around 20 to 21 inches, enabling it to handle moderate snowfall depths. Throwing distances could reach up to 30-35 feet depending on snow conditions. The drive system generally consisted of a wheel-drive configuration with multiple forward and reverse speeds for enhanced control. Chute controls were typically manual, allowing users to adjust the direction of the snow stream. Some models may have included a headlight for improved visibility during evening or early morning snow removal. While heated grips weren't a standard feature on the 613, its overall design made it suitable for tackling medium to heavy snowfall on driveways and sidewalks.
Specifications
| Engine | Briggs & Stratton or Tecumseh 5-7 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - 5-6 Forward/2 Reverse |
| Fuel Tank | 1-1.5 Gallons |
| Weight | Approx. 180-200 Lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace worn or damaged parts to maintain optimal snow removal performance.
- Shear Pin Replacement: Keep extra shear pins on hand. If the auger stops suddenly, it's likely a shear pin has broken. Replace it immediately after identifying the obstruction that caused it to break.
- Belt Tension: Check the belt tension regularly, as loose belts can lead to reduced performance or belt slippage. Adjust or replace belts as needed.
- Fuel Stabilization: Before storing the snow blower for the off-season, add fuel stabilizer to the gas tank to prevent fuel degradation and carburetor problems.
History & Background
The Mtd Cub Cadet White 613 series of snow throwers represented a popular mid-range option within the Mtd product lineup. It aimed to provide a balance between power, maneuverability, and affordability for residential users. While specific major redesigns are not widely documented, Mtd likely made incremental improvements and component updates throughout the production run.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 613?
The Mtd Cub Cadet White 613 typically used a Briggs & Stratton or Tecumseh engine, ranging from 5 to 7 horsepower. Some models featured an optional electric start.
What is the clearing width of the 613?
The clearing width of the Mtd Cub Cadet White 613 is generally between 24 and 26 inches, with an intake height of 20 to 21 inches.
Is the 613 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 613 is a two-stage snow blower. This means it uses an auger to collect and break up the snow, and then an impeller to forcefully throw the snow away from the clearing path.
What are common parts needed for the 613?
Commonly needed parts for the Mtd Cub Cadet White 613 include shear pins, drive belts, auger belts, auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
