Mtd Cub Cadet White 600-SERIES Snow Blower Thrower Parts
Mtd Cub Cadet White 600-SERIES Snow Blower Thrower parts in stock. Quality OEM and aftermarket replacement parts with fast shipping and competitive prices.
The Mtd Cub Cadet White 600 Series snow blowers, primarily manufactured in the late 1990s and early 2000s, were popular gas-powered two-stage models known for their reliability and ability to handle moderate to heavy snowfall. With clearing widths ranging from 24 to 26 inches, they offered a good balance of power and maneuverability for homeowners and smaller commercial properties. These snow blowers are valued for their robust construction and ease of use.
About the 600 Series
The Mtd Cub Cadet White 600 Series represents a range of two-stage snow blowers produced primarily from the late 1990s through the early 2000s. These models often featured engines from brands like Tecumseh or Briggs & Stratton, ranging from approximately 5 to 8 horsepower (or equivalent cc rating). Many offered an electric start option for easy starting in cold weather. The two-stage design incorporated a serrated auger to break up snow and ice, followed by an impeller that threw the snow out of the discharge chute. Clearing widths typically varied between 24 and 26 inches, with an intake height around 20-21 inches, allowing them to handle significant snowfalls. Throwing distances could reach up to 30-35 feet, depending on the model and snow conditions. Drive systems were typically wheel-driven, with multiple forward and reverse speeds to provide good control. Chute controls were usually manual, allowing the operator to direct the snow stream. Many models included a headlight for improved visibility in low-light conditions. While heated grips were not standard, some aftermarket kits were available. These snow blowers are well-suited for homeowners and property managers dealing with moderate to heavy snow accumulations on driveways, sidewalks, and other surfaces.
600 Series Specifications
| Engine | Tecumseh / Briggs & Stratton 5-8 HP, Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | 200-250 lbs |
| Years Produced | Late 1990s - Early 2000s |
600 Series Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace worn or damaged components to maintain optimal performance.
- Check and Replace Shear Pins: Shear pins protect the auger gearbox from damage. Inspect them before each use and replace any that are broken or sheared off. Use only the correct replacement shear pins.
- Oil Change and Fuel Stabilizer: Change the engine oil annually and add fuel stabilizer to the gas tank before storing the snow blower for the off-season. This prevents fuel degradation and ensures easy starting next season.
- Adjust Skid Shoes: Adjust the skid shoes to prevent the scraper blade from scraping the ground and to accommodate different surface types.
600 Series History & Background
The Mtd Cub Cadet White 600 Series was introduced as a mid-range snow blower designed to offer a balance of power and maneuverability. While there weren't major redesigns during its production run, there were slight variations in engine size and features. The 600 Series was a popular choice for homeowners looking for a reliable two-stage snow blower at a reasonable price point.
Frequently Asked Questions
Which drive belt set is recommended for the MTD Cub Cadet White 600 Series?
For optimal performance, the 7540430 - Belt, Drive Set/2 is recommended as a replacement drive belt set for the MTD Cub Cadet White 600 Series.
What replacement drive belt fits the MTD Cub Cadet White 600 Series?
A reliable replacement drive belt for the MTD Cub Cadet White 600 Series is the 9540456 - Belt, Drive.
Is there a replacement for MTD part number CC12429 for the 600 Series?
Yes, our 7540430 - Belt, Drive Set/2 is an equivalent replacement for MTD part number CC12429, commonly used in the 600 Series.
What are common parts needed for the 600 Series?
For the MTD Cub Cadet White 600 Series, common wear items include drive belts like the 7540430 - Belt, Drive Set/2 and the 9540456 - Belt, Drive. Other frequently replaced items are shear pins, auger paddles (if equipped), scraper bars, skid shoes, spark plugs, and fuel filters.











