Mtd Cub Cadet White 528SW-31AH54TT710 Snow Blower Thrower Parts
The MTD Cub Cadet White 528SW (model 31AH54TT710) is a popular gas-powered, two-stage snow thrower likely manufactured in the late 2000s and early 2010s. Known for its reliable engine and 28-inch clearing width, this model provided a great balance of power and maneuverability for residential snow removal. Its user-friendly design made it a favorite among homeowners seeking a dependable solution for moderate to heavy snowfall.
The MTD Cub Cadet White 528SW, model 31AH54TT710, was a popular two-stage snow blower designed for residential use, likely produced from the late 2000s into the early 2010s. It was powered by a Powermore engine, typically around 208cc, providing ample power for tackling moderate to heavy snowfalls; electric start was often an option for ease of use in cold conditions. As a two-stage model, the 528SW employs an auger to break up the snow and then an impeller to throw it away from the clearing path. The auger system is designed to efficiently gather snow and feed it into the impeller. The 28-inch clearing width allowed for relatively quick snow removal, while the intake height was sufficient for handling deeper drifts. The throwing distance could reach up to 30-40 feet, depending on snow conditions. The wheel drive system with multiple forward and reverse speeds provided good traction and maneuverability. The chute control was typically a manual crank, allowing users to direct the snow discharge. Some models featured a headlight for improved visibility in low-light conditions. The 528SW was ideally suited for homeowners with medium to large driveways and moderate to heavy snow accumulation.
Specifications
| Engine | Powermore 208cc Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 28 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 1.9 gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Late 2000s - Early 2010s (Estimated) |
Maintenance Tips
- Regularly inspect the auger and impeller for any signs of damage or wear. Replace shear pins immediately if broken to prevent serious damage to the auger gearbox.
- Check the belt tension and condition regularly. Replace worn or frayed belts to ensure optimal performance of the auger and impeller.
- Change the engine oil according to the manufacturer's recommendations (typically after every 25-50 hours of use). Use fuel stabilizer during off-season storage to prevent fuel degradation and carburetor issues.
- Adjust the skid shoes as needed to maintain proper clearance between the scraper bar and the ground. This will prevent damage to the scraper bar and ensure efficient snow removal.
History & Background
The MTD Cub Cadet White 528SW (31AH54TT710) was introduced as a reliable and affordable two-stage snow blower for homeowners. It offered a good balance of power and features for its price point, making it a popular choice for residential snow removal. While specific redesign details are difficult to find, the model likely saw minor updates during its production run to improve performance and user experience.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 528sw 31ah54tt710?
The Mtd Cub Cadet White 528sw 31ah54tt710 typically features a Powermore 208cc engine. Some models may have included an electric start option.
What is the clearing width of the 528sw 31ah54tt710?
The Mtd Cub Cadet White 528sw 31ah54tt710 has a clearing width of 28 inches and an intake height of approximately 21 inches.
Is the 528sw 31ah54tt710 a single-stage or two-stage snow blower?
The 528sw 31ah54tt710 is a two-stage snow blower. It uses an auger to collect and break up the snow, and then an impeller to throw the snow out of the chute.
What are common parts needed for the 528sw 31ah54tt710?
Common replacement parts for the 528sw 31ah54tt710 include shear pins, belts (auger and drive), scraper bar, skid shoes, spark plugs, and fuel filters.
