Mtd Cub Cadet White 528SW-31AH54TT709 Snow Blower Thrower Parts
The MTD Cub Cadet White 528sw (model 31AH54TT709) is a gas-powered, two-stage snow blower known for its reliable performance in residential snow removal. Featuring a 28-inch clearing width, this model provided a great balance between power and maneuverability when it was available. It's designed to handle moderate to heavy snowfall on driveways and walkways.
The MTD Cub Cadet White 528sw, model number 31AH54TT709, was part of MTD's lineup of mid-sized, two-stage snow blowers. This model was known for its robust construction and user-friendly features. It typically features a powerful gas engine, often a Tecumseh or Briggs & Stratton engine in the 5-8 HP range, though electric start options were often available for added convenience. The two-stage design utilizes an auger to break up the snow and then an impeller to throw it away from the clearing path. The 28-inch clearing width and intake height of around 21 inches allow it to handle significant snowfall depths. Expect throwing distances of up to 30-40 feet, depending on snow conditions. It is wheel-driven, with multiple forward and reverse speeds, allowing users to adjust to different snow conditions. Chute control is typically manual, allowing for directional control of the snow stream. While heated grips and headlights were not standard on all units, some versions did include them. This snow blower is ideally suited for homeowners with medium to large driveways and those who experience moderate to heavy snowfall.
Specifications
| Engine | Tecumseh or Briggs & Stratton 5-8 HP (Electric Start Available) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 28 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Approx. 1.5 gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Likely Mid to Late 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger and impeller for damage or wear. Replace worn or damaged parts immediately to maintain optimal performance.
- Check and Replace Shear Pins: Shear pins protect the auger gearbox from damage. Inspect them before each use and replace any broken shear pins with the correct type. Using the wrong shear pin can cause serious damage to your snowblower.
- Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season. This will prevent fuel from degrading and causing carburetor problems. Drain the carburetor bowl.
History & Background
The MTD Cub Cadet White 528sw (31AH54TT709) was a popular model within MTD's range of two-stage snow blowers. It offered a good compromise between size and power. While specific dates are hard to pinpoint, it was likely introduced in the mid to late 2000s. There were no major redesigns during its production run; updates were typically limited to minor component changes.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 528sw 31ah54tt709?
The MTD Cub Cadet White 528sw (31AH54TT709) typically used a Tecumseh or Briggs & Stratton gas engine. Horsepower ranged from 5-8 HP, and some models offered an electric start option for easier starting in cold weather.
What is the clearing width of the 528sw 31ah54tt709?
The MTD Cub Cadet White 528sw (31AH54TT709) has a clearing width of 28 inches, allowing it to clear a substantial path with each pass. The intake height is approximately 21 inches, allowing it to handle moderate snow drifts.
Is the 528sw 31ah54tt709 a single-stage or two-stage snow blower?
The MTD Cub Cadet White 528sw (31AH54TT709) is a two-stage snow blower. It uses an auger to gather the snow and then an impeller to throw the snow out of the chute. This two-stage design makes it more effective for handling heavier snowfalls compared to single-stage models.
What are common parts needed for the 528sw 31ah54tt709?
Common replacement parts for the MTD Cub Cadet White 528sw (31AH54TT709) include shear pins, belts (auger and drive belts), auger paddles/blades, scraper bar, skid shoes, spark plugs, and fuel filters. Regular maintenance and replacement of these parts will ensure optimal performance and longevity of your snow blower.
