Mtd Cub Cadet White 526SWE-31AH56TS756 Snow Blower Thrower Parts
The MTD Cub Cadet White 526SWE (model 31AH56TS756) is a gas-powered, two-stage snow thrower known for its reliable performance in moderate to heavy snowfall. Featuring a 26-inch clearing width, this model was designed for homeowners and property managers needing a dependable machine to tackle driveways and walkways. Its combination of power and ease of use made it a popular choice during its production run.
The MTD Cub Cadet White 526SWE, model number 31AH56TS756, was part of MTD's line of two-stage snow blowers, offering a balance of power and maneuverability for residential snow removal. While the exact years produced may vary, it generally falls within the late 2000s to early 2010s era. This model typically features a Powermore engine, commonly around 208cc or higher, delivering sufficient power for its 26-inch clearing width. An electric start option was likely available, providing easy starting in cold conditions. The 526SWE's two-stage design uses an auger to break up snow and then an impeller to throw it through the chute. The clearing width is 26 inches, with an intake height around 21 inches, allowing it to handle deeper snowfalls. Throwing distance is typically up to 30-40 feet, depending on snow conditions. It uses a wheel drive system with multiple forward and reverse speeds, providing good traction and control. The chute rotation is usually controlled manually, allowing for easy adjustment of the throwing direction. While features like headlights and heated grips might not be standard, they could have been available as optional add-ons. This snow blower is ideal for homeowners dealing with moderate to heavy snow accumulations on driveways, sidewalks, and patios.
Specifications
| Engine | Powermore 208cc Electric Start (Likely) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 1.9 gallons |
| Weight | Approximately 180 lbs |
| Years Produced | Late 2000s - Early 2010s (Estimated) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace worn parts to maintain optimal snow throwing performance.
- Check and Replace Shear Pins: Shear pins are designed to break if the auger hits a hard object, protecting the engine and gearbox. Keep spare shear pins on hand and replace them immediately when broken.
- Use Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
- Adjust Skid Shoes: Adjust the skid shoes according to the surface you are clearing (e.g., raise them for gravel driveways and lower them for paved surfaces) to prevent damage to the snow blower and the surface.
History & Background
The MTD Cub Cadet White 526SWE was introduced as a mid-range two-stage snow blower, offering a balance of features and affordability for homeowners. As part of the MTD family of brands, it benefited from MTD's established engineering and manufacturing capabilities. While specific updates and redesigns are difficult to pinpoint without precise year-to-year model changes, its popularity stemmed from its reliability and ease of use in typical residential snow removal scenarios.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 526swe 31ah56ts756?
The MTD Cub Cadet White 526swe 31ah56ts756 typically uses a Powermore engine, generally around 208cc. Electric start was likely an available option, providing easier starting in cold conditions.
What is the clearing width of the 526swe 31ah56ts756?
The clearing width of the MTD Cub Cadet White 526swe 31ah56ts756 is 26 inches, and the intake height is approximately 21 inches.
Is the 526swe 31ah56ts756 a single-stage or two-stage snow blower?
The 526swe 31ah56ts756 is a two-stage snow blower. It uses an auger to gather and break up the snow, then an impeller to powerfully throw it through the discharge chute.
What are common parts needed for the 526swe 31ah56ts756?
Common parts needed for the 526swe 31ah56ts756 include shear pins, belts (auger and drive belts), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
