Mtd Cub Cadet White 526SWE-31AH54TS756 Snow Blower Thrower Parts
The MTD Cub Cadet White 526SWE (model 31AH54TS756) is a popular gas-powered, two-stage snow blower known for its reliable performance in residential snow removal. With a clearing width of 26 inches, this model was likely manufactured in the mid-2000s and offers a balance of power and maneuverability. Its two-stage design allows it to handle heavier, wetter snow conditions compared to single-stage models.
The MTD Cub Cadet White 526SWE, model number 31AH54TS756, was a popular choice for homeowners seeking a dependable two-stage snow blower. Produced during the mid to late 2000s, this model typically features a Tecumseh or Briggs & Stratton engine, likely in the 5-6 HP range. An electric start option was commonly available for easy starting in cold weather. The 526SWE is a two-stage snow blower, meaning it utilizes an auger to break up and collect the snow, then an impeller to throw it out of the discharge chute. It boasts a 26-inch clearing width and an intake height of around 20-21 inches, allowing it to handle moderate to heavy snowfall. Expect a throwing distance of up to 30-40 feet, depending on snow conditions. The drive system is typically wheel-driven with multiple forward and reverse speeds for easy maneuvering. Chute controls are generally manual, allowing the operator to adjust the direction of the snow stream. While features like a headlight or heated grips might not be standard, the 526SWE excels in handling moderate snowfalls on driveways and walkways, providing a reliable snow removal solution for homeowners.
Specifications
| Engine | Tecumseh or Briggs & Stratton 5-6 HP Electric Start Option |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Unknown gallons |
| Weight | Unknown lbs |
| Years Produced | Mid-Late 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for any signs of wear, damage, or bending. Replace worn or damaged parts promptly to maintain optimal performance.
- Check and Replace Shear Pins: Shear pins protect the auger and gearbox from damage. Inspect them regularly and replace any that are broken or sheared off. Always use the correct shear pins specified for your model.
- Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season. This prevents fuel from degrading and causing starting problems in the fall.
History & Background
The MTD Cub Cadet White 526SWE was part of a lineup of two-stage snow blowers designed for residential use. While specific redesigns are difficult to pinpoint without exact year information, MTD regularly updated their models with minor improvements to engine technology and ergonomics. This model contributed to the popularity of two-stage snow blowers by providing a reliable and affordable option for homeowners dealing with moderate snowfalls.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 526swe 31ah54ts756?
The Mtd Cub Cadet White 526swe 31ah54ts756 typically features a Tecumseh or Briggs & Stratton engine. The horsepower rating is generally in the 5-6 HP range. An electric start option was commonly available.
What is the clearing width of the 526swe 31ah54ts756?
The Mtd Cub Cadet White 526swe 31ah54ts756 has a clearing width of 26 inches. The intake height is approximately 21 inches, allowing it to handle a decent amount of snow depth.
Is the 526swe 31ah54ts756 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 526swe 31ah54ts756 is a two-stage snow blower. This means it uses an auger to gather and break up the snow, and then an impeller to throw the snow out of the chute. This design is more effective for handling heavier, wetter snow.
What are common parts needed for the 526swe 31ah54ts756?
Common wear parts for the Mtd Cub Cadet White 526swe 31ah54ts756 include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. Regular replacement of these parts ensures optimal performance and longevity of your snow blower.
